Original standard number HGJ 514-1987 HG/T 21635-1987 Carbon steel, low alloy steel seamless butt welding pipe fittings HG/T21635-1987 Standard download decompression password: www.bzxz.net

Industry Standard of the People's Republic of China
HG/T 21635-1987
Carbon Steel, Low Alloy Steel Seamless
Butt-Welded Pipe Fittings
1987-03-01 Issued
Ministry of Chemical Industry of the People's Republic of China
1987-05-01
Metric Tee Series -
2. 2 Imperial Tee Series -.
Metric Short Radius Pipeline
3.2Metric Long Diameter Pipe Series
3. 3 Imperial Short Semi-Light Pipe Series
3. 4 British long radius pipe series
concentric reducer
metric concentric reducer series
4.2 British intermediate diameter pipe series
eccentric reducer
5. 1 metric eccentric reducer series
5. 2 British eccentric reducer series
6.1 metric pipe series.
6. 2 British pipe Pa series
Pipe fittings specification table
8 Technical conditions
Industry standards of the People's Republic of China
Carbon steel, low alloy steel seamless butt welding pipe fittings
HG/T21635-1987
Editor: Process piping design technology center of the Ministry of Chemical Industry China Jianqiu Chemical Engineering Company
Approval unit: Ministry of Chemical Industry of the People's Republic of China Implementation date: May 1, 1987 National Chemical Engineering Construction Standard Editing Center (formerly The Engineering Construction Standard of the Ministry of Chemical Industry (Editing Center) 2002
Hard Saw, Low Alloy Steel Seamless Butt-welding Pipe Fittings are the design recommendations approved by the Ministry of Chemical Industry for promulgation and implementation. The contents of this standard include: general principles, tees, joints, concentric reducers, braided pipes with different diameters, pipe widths, pipe fittings connection specifications, technical accessories
This standard is proposed by the Process Piping Design Technology Center of the Ministry of Chemical Industry, and compiled by China Global Chemical Engineering Corporation. The compilers are Zuo Chouhua, Yang Zichan, Zheng Tiansu, etc., and the reviewers are Feng Yuan, Bian Maoji, Zhan Tuxuan, etc. 1 General
This standard is applicable to seamless butt-welding pipe fittings made of carbon steel and low alloy, including three (equal diameter and reduced diameter), 90 elbows (long radius and short radius), reducers (concentric and eccentric) and pipe caps, divided into two series of metric and imperial. According to the current domestic production and usage conditions, the true diameter range of these four pipe fittings is as follows: equal-diameter tee, reducing tee main pipe: 90* elbow: the nominal diameter of the large-end pipe cap of the concentric reducer and eccentric reducer is 50~600mm (24~24\), and the minimum nominal diameter of the branch pipe of the reducing tee is half of the nominal diameter of the large end. The nominal pressure of metric pipe fittings is divided into four grades: P25, 40, 64, and 100kgf/cm (i.e. 2.5MPa, 4.0MPa, 6.4MPa, and 10MPa). The whole is calculated based on the allowable stress of the material [o] = 1310kgf/cm, and the medium corrosion margin is calculated as 1.5mm. The British pipe fittings are divided into three types according to the pipe number (Schedule Number is abbreviated as Schxx): Sch40, Se80, and Seh160. The units used in this standard are: length is m (except where cm is specified), inch; pressure is kgf/cm2 (kgf/cm2*ao.1MPa); weight is kg.
For the thickness of the pipe joints of all pipe fittings, please refer to the pipe fitting connection regulations. If the orderer has special requirements, please make an additional request. 2.3 Returns
2.1 Public three-certificate series
60×40
55×50
55×46
65×32
8 0×65
100100
100×50
125X57 Road
Online Shopping
128 Electric
Outside the Pull-out Office
Public Path
150×150
150×125
150×00
150×80
200200
200X125
250 x250
250×200
250×150
280X125
3cux395
505×59
30OYcenterO
200×150
350X360
350×300
325×250
350×200
Diameter of the pile mouth
Center main Center tube movement
Diameter of the public ring
4Q3×350
483×300
403250
409X200
453×450
450X400
450×350
450×300
470×a30
600x500
500X450
533 X4C0
500×350
50X900
500X250
600X600
600×450
600×400
2Q0×350
Oral effect external classics
Looked at #
Center has main end center sub-branch kidney brand
2.2 British tee series
Male coupon diameter
D×dr(inch)
21/1×2/t
11/+×1/s
3 ×2/1
4×21/
5×2*/
Outer diameter at the mouth
Center to the main inquiries center medical pipe end
White,53
Sch160
Limited,7 curves
11, 13
11, 13
Nominal diameter
10×10
13×12
14 x10
Single mouth pregnancy
Center to the main resources increase center branch pipe training
Seh160
15,08-1
15, 09
Drxdr(English)www.bzxz.net
16×16
16 x14
18×10
16 ×8
18×18
_18×1要
20 ×20
20×10
24×24
24×20
24X 1B
24×16
2±×14
24 ×12
Slope of the shrimp saint
Center to the main object center to the text doctor
347***
11, 13
Sohieo
3, short radius ferrule series
business language
filling test outer diameter
3 elbow
center movement
In the table, only the actual whole is based on the actual whole, and the size of its parts and features is the standard PH2S
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.