From HG 5-1573-1985 to HG/T 3147-1985 Flat bottom and flat top storage tank series HG/T3147-1985 Standard download decompression password: www.bzxz.net

The standard flat bottom and flat top storage tank series of the Ministry of Chemical Industry of the People's Republic of China
53-8F5
is adjusted to: HG/3147-8
The design pressure of this standard series of tanks is normal pressure (refers to the maximum liquid and partial pressure of the gas phase space of the storage tank is not greater than 200mmH,0), the design temperature is 0℃200℃, and the nominal volume V is 0.1～8m3. 1 Type, basic parameters and dimensions
1.1 Structural type (see Figure 1 and Table 1)
Promulgated by the Ministry of Chemical Industry of the People's Republic of China on 1985-1113
Implementation on 1985-12-01
HG 51573-85
Detailed table
Note: When the nominal diameter D is *.1600mm, no angle steel is set: nominal diameter D. When the diameter is 600 and 1800mm, use two 50×51×5 steel bars with a nominal first diameter D. When the diameter is 2000 and 2200m㎡, use two 63×63×6 steel bars. 1.2
Basic parameters and dimensions (see Table 2):
20 price 0
140 core
220 core
26(H）
HG 5—1573-85
inch, mm
half bottom, flat
63 ×63
Batch number
HO 5—1573—85 -
HG 5--1573--85 - 2
1573-—85 3
HG5--157385
HG 5 --1573 --H5 -- 5Www.bzxZ.net
HG 5—1575 -85- 6
HG 5-1573—85 - 7
HG 5—1573—85-H
HG 5— 1573—85- 9
HG 6—[573—85-10
I[G 5 . 1573——85-11
HG -1573 — 85-12 | | tt | 5-1573--85-18
HG 5-1573-85-19
HG 5—1573—-85—20
HG 5-1573--85-2]
2 Installation requirements
HG5-1573—85
2.1 Tanks of this standard series should be placed on a flat foundation. 2.2 For tanks placed on a wall or steel frame, the support spacing should be in accordance with Figure 2 and Figure 3. 2.2.1 When the nominal diameter D≤100mm, the support spacing of the steel section (see Figure 2): (Figure: A -0.6 D., B -0.8D)
2.2.2 When the nominal true diameter D is 1000mm, the adjustable distance of the steel support (see Figure 3) (Gate + 1: A-500mm, B=700mm, CU.8D)a
Marking example
For a storage tank with nominal volume V: = 0.1m, nominal diameter D, = 500mm, the specified marking code is busy tank LC-0.1-500HG5—1573-85-14 Technical requirements
Should comply with the provisions of HG5-1571-85 "Ordinary Carbon Steel and Low Alloy Steel: Tank Standard Series Classification Technical Case". 5 Selection Instructions
5.1 When selecting a tank of this standard series, fill in the "Tank Ordering Conditions Table" (see Appendix A) according to the use requirements. 5.2 For the tanks in this standard series, manholes and pipes shall be set as required, and their quantity, specifications, orientation and elevation shall be filled in the "Tank Ordering Conditions Table". 5.3 The implementation drawings of this standard series shall be drawn by the design unit or manufacturer based on the parameters in the standard series. 11
S8-e21-s DHf
·China Institute of Materials
Additional instructions:
HG 51573-85
This standard is proposed and managed by the Chemical Machinery Research Institute of the Ministry of Chemical Industry. This standard was drafted by Beijing Petrochemical Engineering Company of China National Petroleum Corporation and Haihua Chemical Machinery. The main drafters of this standard are Gu Zhihong, Jian Wenqing, Lv Caifeng, Li Xianxiang, Wu Zhixian and Sheng Wenlan.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.