National Standard of the People's Republic of China Classification of coal quality Classification of coal sulphur content Classification for quality of coal-Classification for sulphur content of coal Subject content and scope of application This standard specifies the classification of coal according to the range of dry basis sulphur content (Sd) and its nomenclature. This standard applies to the classification of coal according to sulphur content in coal exploration, production and processing and utilization. Classification of coal sulphur content Coal sulphur content is classified according to the following table: Additional instructions: Grade name Extra-low sulphur coal Low sulphur content coal Low-medium sulphur coal Medium sulphur content coal Medium-high sulphur content coalwww.bzxz.net High sulphur content coal This standard is proposed by the Ministry of Coal Industry of the People's Republic of China. This standard is under the jurisdiction of the National Technical Committee for Coal Standardization. This standard is drafted and interpreted by the Beijing Coal Chemistry Research Institute of the China Coal Research Institute. The main drafters of this standard are Chen Wenmin, Liu Shuyun and Wang Zhiling. Approved by the State Bureau of Technical Supervision on September 24, 1994 GB/T 15224.2-94 Sulfur content (St.a) range, % 0.51~~1.00 1.01~1.50 1.51~2.00 2.01~3.00 Implementation on August 1, 1995 Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.