GB 19269.1-2003 General rules for safety inspection of dangerous goods packaging for road transport
Some standard content:
Chapter 5, Chapter 6 and Record A of this standard are for marketing purposes only, and the rest are for promotional purposes only. GD 19269.1—20C3
This standard is one of the series of standards for safety specifications for the inspection of dangerous goods for highway transportation, and it is used in conjunction with the standards for safety specifications for the inspection of dangerous goods for highway transportation and the standards for the inspection of dangerous goods for highway transportation. This standard is not equivalent to the United Nations Agreement on the Transport of Dangerous Goods by Highway (No. 12, 2003) and the Regional Agreement on the Transport of Dangerous Goods by Highway (No. 3<20>3), but its relevant technical contents are completely consistent with the above regulations and agreements. The format of this standard is in accordance with G/T 1.1-200C: Appendix A of this standard is a normative appendix. Appendix B and International Appendix B are informative appendices. This standard was proposed and approved by the National Dangerous Chemicals Management Standardization Technical Committee (SACTC.251): The responsible unit for the development of this standard is: Shanle The main authors of this standard are: Anshan Inspection and Quarantine Bureau, Jiangsu Entry-Exit Inspection and Quarantine Bureau, Tianban Entry-Exit Inspection and Quarantine Bureau, Beijing Entry-Exit Inspection and Quarantine Bureau, Jiangxi Entry-Exit Inspection and Quarantine Bureau, etc. This standard is formulated and implemented by:
1 Scope
General rules for safety specification for inspection of packaging of dangerous goods for road transport
This standard defines the classification, requirements, codes and specifications of packaging of dangerous goods for road transport: GR 13269.1-203
This standard is applicable to the inspection of packaging of lightly dangerous goods for road transport except Class 1, Class 6, Class 6.2 and Class 7. This standard is not applicable to wide-ranging devices, and the packaging items with a net weight of 40k8 and a volume of 451 are subject to the following normative references. The clauses in the following documents are longer than the standard references, and are for the purpose of adding clauses to the standard. The documents are within the specified period of use, and all subsequent revisions (excluding those due to errors) are not applicable to this standard. The parties involved in the successful research and development of the standard are encouraged to supplement the pre-edition versions of these documents, and the specifications are not applicable. 3. The latest version of this standard is applicable to GB:T325 Packaging capacity
B/T4122.1 Packaging language
GB19253.3-2(3 Highway transport dangerous goods packaging inspection safety design performance control test CB19253.1200 Highway transport dangerous goods packaging inspection safety specification 3 Terms and definitions
/T4122.1 The following test techniques and definitions are used in this standard. 3. 1
Bubble
A rectangular container made of metal, wood, laminated wood, fiberboard, plastic or other suitable materials, 3. 2
A drum (drum: drum
|A container with flat or convex ends made of metal, laminated wood, plastic, plywood or other suitable materials, 3. 3
A container made of paper, film, textile, woven material or other suitable materials, 3. 4
Jerrtem
|A container with a shape or multiple shapes made of metal: 5. 5
A barrel made of woodelirrel
A container made of natural materials, which is made of a material that is not movable or has no material, 3. 6
Lightweight standard gold container eht-gangemetalparkagig compensation surface appearance example, shaped like a circle or multiple shaped, the body is a detailed wall call center? .5m, flat or formed with one or more holes, the bottom of the gold is made into a Levi-shaped neck piercer and a through-shaped piercer 3.7
receplacle
B 15263.1—2003
The closure for placing and containing substances or articles, including packaging, packaging and other materials required for the storage function. 3.8
The packaging material and other materials required for the storage function. 3.9
The packaging material and other materials required for the storage function. 3.10
The inner container inracking
The outer container during transportation. 3.12
The outer protective device of the combined or combined container together with the groove to contain and protect the inner container and the necessary materials, agents and other materials.
Composite packaging
A container that is assembled together for transportation and consists of one or more inner containers fixed in an outer container. 3.4
Composite packaging
A container that is assembled with an outer container and a narrow container, and its structure makes the inner container and the outer container form a complete container. After the container is assembled, it becomes a single complete device, which is used for loading, storage, transportation and unloading. 3.15
Average packaging
A package that is assembled together to form a unit for the purpose of storage during transportation. 3.16
Galvage packaging
A special container for dangerous goods for the purpose of recycling or handling of defective, leaking or non-compliant dangerous goods or dangerous goods.
Sealing the vehicle
Prevent the packing of the substance. Including the solid material that does not leak out during transportation. 3.19
Absorbent materials
ahsorhent.niaterial
Specially, the number and content of the liquid that can be retained in the vehicle once it breaks, the leaked liquid can be quickly absorbed by the retained vehicle:
Incompatible inenmpatible
GB 19269,-20C3
According to the selection of dangerous goods, if it is easy to cause the release of heat or gas or generate a wide range of similar substances or produce physical and chemical phenomena, the packaging content should be reduced.
Performance specification
PCRformanee inspeeliun
Simulate the unsafe transport environment container to conduct type tests to determine whether the corresponding performance of the container is consistent with the design and whether it complies with the relevant provisions.
Use approval
useappruisal
After the container is filled with dangerous goods, the packaging is identified to determine whether the container is in compliance with the relevant regulations. 3.23
United Nations number
A single-digit number compiled by the United Nations Committee on the Transport of Dangerous Goods: used to identify a substance or a specific substance. 4 Classification
4.1 Classification of dangerous goodsbZxz.net
4.1.1 Dangerous goods are divided into 9 categories according to their common or most dangerous hazard. These categories are further divided into items. Category and item number order is not the order of danger, 4.1.2 Class 1 explosives
-.1 minus: substances and articles with overall explosion hazard,,, item: homogeneous materials with no penetration hazard: 1.1, substances and articles with combustion hazard, partial penetration hazard or both, but no explosion hazard:
substances and articles with overall explosion hazard:
very insensitive substances with overall explosion hazard:
-1.6 period: extremely insensitive items with overall combustion hazard, 4.1.3 Class 2: gases
21 top: flammable and non-toxic gases:
-3.2: non-flammable non-toxic gases;
2.3: set gases,
4.1. 4.1.5 Class 4: irradiated substances; substances that emit volatile gases easily; 1.1: flammable solids, self-reactive substances and solid desensitized explosives; 4.2: substances that are prone to spontaneous combustion; 1.3: homogeneous substances other than flammable gases; 4.1.6 Class 5: oxidizing substances and organic peroxides; 5.1: oxidizing substances; 5.2: organic peroxides; 4.1.7 Class 6: toxic substances and infectious substances; 1.1: toxic substances; 1.2: see! 4.1.8 Class 7: radioactive substances; 4.1.9 Class 6: corrosive substances; 4.1.10 Class 9: Miscellaneous dangerous substances and articles 3
GEI19269.1—2003
4.2 Classification of dangerous goods packaging
4.2.1 Screening 1 Class 2, Class 5 5, > Class 6. 2, substances falling under Class 7 and Class 4 4. 1 All kinds of dangerous goods except self-reactive substances are divided into three packaging categories according to their degree of danger: Class 1 packaging - indicating high hazard:
Class 1 packaging - indicating medium hazard:
Class 1 packaging - indicating light hazard:
Class 1 packaging - indicating high hazard:
Class 1 packaging - indicating medium hazard and
Class 1 packaging - indicating light hazard:
Class 1 packaging - indicating high hazard:
Class 1 packaging - indicating medium hazard and
Class 1 packaging - indicating light hazard:
Class 1 packaging - indicating high hazard:
Class 1 packaging - indicating medium hazard and
Class 1 packaging - indicating light hazard:
Class 1 packaging 5 Requirements
2.1 General requirements
5.1.1 The containers must be marked with permanent markings and signs. 5.1.2 The containers for the transport of dangerous goods shall have a reasonable structure and good rot resistance, and shall comply with the United Nations Model Protocol on the Transport of Dangerous Goods and the International Agreement on the Transport of Dangerous Goods by Road. Their design, workmanship and materials shall be convenient for safe loading and unloading and able to withstand the risks associated with normal transportation conditions. 5.1.3 Dangerous goods shall be packed in containers of good quality, which shall be able to withstand the risks associated with normal transportation conditions. 5.1.3 Dangerous goods shall be packed in containers of good quality, which shall be able to withstand the risks associated with normal transportation conditions. The contents should not be damaged by any changes in temperature, pressure (particularly those caused by changes in temperature during transport). During transport, no hazardous residues should be stuck to the outside of the container. These requirements apply to new, reused, reconditioned or remanufactured containers: 5.1.4 The parts of the container that are in contact with the dangerous goods should not be affected by or weakened by the dangerous goods. They should not cause any hazardous effects in the package, such as causing the dangerous goods to react or react with the dangerous goods. When necessary, these parts should have appropriate internal coatings or be properly treated. 5.1.5 The liquid in the container should have enough space to ensure that it will not leak or deform due to the temperature changes that may occur during transportation. There should be specific requirements for the specifications. Otherwise, it should not be stored below 5 degrees Celsius.
5.1. The inner container in the outer container should be filled with gas under normal conditions, not to rupture, be punctured or be placed in an outer container. For example, the outer container is made of a material that is easily broken or easily contaminated. If the inner container is made of a material that is easily broken or easily contaminated, the outer container or the outer container cannot be protected quickly if the inner container is clean.
5.1.7 Dangerous goods should not be placed in the same outer container as other dangerous goods, if they are combined and contain dangerous substances and are connected and:
a) ignite or heat;
release flammable, explosive or corrosive gases;
i) produce unstable substances;
5.1. The outer container is filled with visible or faint substances. The closure device of the container shall be modified (the percentage of the active agent or the micro-reducing agent in the container shall drop to the specified limit during transportation). 5.1.9 Micro-particles may be installed in the container for transportation under the proper conditions of transportation. If the package has the function of stopping the release of gas (due to the increase in temperature within other limits) in the middle of the package and produces gas K in one hour, a vent may be installed on the container, but the gas released shall not cause flammability and emission hazards. The through hole shall be designed to ensure that under normal transportation conditions, when the container is in the transportation condition, no micro-particles will leak out, foreign matter will not leak out, etc. 5.1.10 All sets of modified and reusable containers shall be able to pass the tests specified in GB19269,-2003. Before loading and transfer for transport, each container shall be inspected in accordance with G.19260. to ensure that it is free from corrosion, contamination or other damage. When the strength of the container is reduced compared with the approved design, it shall not be used or shall be refurbished to pass the test of the design. 5.1.11 The container to be filled shall be suitably adapted to the internal forces that may occur under normal conditions of transport. Containers marked with a pressure-reducing test knife shall only be filled with the following gas pressures: the total pressure within the group determined by the filling value of 5 and the maximum filling specified in 5.1. (that is, the approximate vapour pressure of the object plus the partial pressure of air or other volatile gas, minus 1 kPa) is less than two-thirds of the marked test pressure at 55 °C; at 55 °C, it is less than four-sevenths of the sum of the marked test pressure plus 100 kPa! At 55, it is less than one-tenth of the marked test force of 10ka. 5.1, 12 The following steps must be tested under the following circumstances! The sealing performance of the room can be tested, and it can be delivered to the active test level specified in GB9.2-2003! Before the first use in transportation;
h) Note that the container can be used for transportation before it is used for transportation after being regulated or sorted. When conducting this test, the wearer does not need to be equipped with a self-closing device: if the test does not cause the inner container to be detected, the test can be carried out without an outer container. The following situations can be exempted from or integrated into "a combination of containers (breaking, twisting or twisting)" or other injuries: a light standard non-metal bottom sealed container
5.1.13 The container used for transportation by a vehicle may be reversed and rolled under the pressure of the system.
5.1.14 The container used for the dissolving of dilute or undissolved substances should be equipped with leakage prevention or discussion: 5.1.15 The inner container should be fixed and installed to prevent its movement in the outer container to prevent the movement of the auxiliary parts under the belt. The same container is a main bag of the same type, and the outer packaging of the same type is 4.2, or the outer packaging of the same type is 5,4,3 and the first type 5.1, and the sixth type 6. 1. When the contents are to be transported, there should be an absorbent material on the outside. The absorbent material should not react with the dangerous goods in the container, nor cause dangerous chemical reactions that may change the protective properties of the contents. 5.1.16 The strength and thickness of the packaging material should ensure that the chemical properties of the contents will not be changed due to friction and heat during transportation. 5.1.17 After the container is assembled to hold the free goods, the inner shell of the container should be marked with a label indicating the direction of operation.
5.1. For damaged, non-compliant or poorly inspected goods, or poorly made or transported goods, they can be transported in salvage containers.
5.1.13 Appropriate measures should be taken to prevent damaged or leaking packages from being transported in salvage containers. 5.2 Special packaging requirements for Class 1 explosives The packaging shall comply with the requirements of 5.1. 5.2.2 All parts of Class 1 explosives shall be designed and manufactured to meet the following requirements: to ensure that the explosives will not collapse or slip under normal transport conditions when the packaging is subjected to foreseeable changes in temperature, humidity and pressure, without causing any accidents or hazards. The entire packaging can move safely under normal transport conditions: The packaging can withstand the load of the equipment and will not be stacked on top of it, which will increase the risk of explosion. The protective function of the device will not be damaged, the container will become unstable or damaged in a way or degree that reduces its strength, or is unstable or damaged. 19269.1—2003
5.23 All explosive materials and products for transport shall have been packed in accordance with the procedures specified in the International Agreement on the Transport of Dangerous Goods by Road. 5.2.4 Class 1 goods shall be packed in accordance with the provisions of the Agreement on the Transport of Dangerous Goods by Road. 5.2.5 Containers shall comply with the class packing test requirements in R19269.9—2003 and shall comply with 5.1.13,. 1. Class 1 packaging does not use metal containers.
5.2.6 The seals of explosives should have appropriate protection devices to prevent leakage. 5.2. If the seal is used, the metal seal should be waterproof. The containers should be waterproof to prevent the rate of desensitization or decompression during transportation.
5.2.9 When the container contains a double layer of water filled in the small space, and the water may freeze during transportation, sufficient antifreeze should be added to prevent the ignition of the weak agent that may cause ignition due to its inherent flammability. 5.2.1 Hooks, hooks and other metal-made closures without protective layers should not penetrate into the interior of the outer container, except to prevent the contents from contacting the metal bottom.
5.2.11 The inner container, the sealing materials during the process of sealing, and the explosive materials or articles in the packaging should be placed in a way that prevents the explosive materials or articles from spreading in the outer container during normal transportation: the metal screen parts of the product should be separated from the metal container to prevent the explosive materials contained in the outer container from being exposed to the outside. The explosive materials not contained in the outer container should be separated to prevent normal operation and collision. The materials in the inner container or outer container, module or container should not be exposed to the outside.
5.2.12 The material of the explosive container shall be compatible with the explosives to be transported in the package and shall not be incompatible with the explosives to prevent interaction or penetration between the explosives and the container materials causing the explosives to fail to be fully transported or causing a temporary change in the hazardous category or configuration. 5.2.13 Prevent explosives from entering the recesses of the container. 5.2.14 Plastic containers shall not be susceptible to or contain sufficient static electricity to cause the explosive substances or articles in the package to ignite, ignite or react when discharged.
5.2.5 Large solid explosive articles intended for military use may be transported unpackaged if they are not equipped with an initiator or an initiator containing at least two effective protective devices. When such articles are propellant or self-propelled, their initiator system shall have a protective device that can be verified under normal conditions. Such unpackaged articles may be fixed on a frame or loaded with boards or other suitable means for temporary transportation, storage, or transportation. They will not ignite under normal conditions of transportation. 5.6 Explosive substances should not be packed in containers or outer containers where the pressure difference between the inside and outside of the container may cause explosion. 5.2.17 If the explosive substances in loose containers or articles without outer shells or separated groups are likely to come into contact with the inner surface of metal containers (1.42, E3, 4A, B and metal containers with inner liners or intermediate layers), the explosive substances in the containers or outer containers may not come into contact with the inner surface of metal containers (1.42, E3, 4A, B and metal containers with inner liners or intermediate layers). 5.2.18 Devices, accessories, sealing materials and explosive substances should be placed in place at a low pressure to ensure that they will not trigger dangerous explosions during operation.
5.2.19 Electro-explosive devices should be protected from electromagnetic field discharge. Explosives containing pyrotechnic substances or explosive materials must be protected from external explosions under normal operation conditions. 5.3 Organic peroxides [5.2] and self-reactive substances (4.1) also have special requirements. 5.3.1 For organic peroxides, all devices should be effectively sealed. For example, if the package is damaged, it may be due to The venting of gases should be limited to prevent the liquid from escaping immediately at the point of the package and should prevent impurities from entering. If there is an outer container, its design should prevent it from affecting the venting function.
5.3.2 The operator should also consult with the relevant safety requirements of the Joint Transport of Hazardous Materials on Highways Agreement.
5.3.3 For packaging of peroxides, it should ensure that all materials in contact with the contents are The material does not have chemical reaction, has no special requirements for dissolved substances, and when leakage occurs, the substance is not easy to burn, and will not cause the decomposition of organic peroxides. 6
5.4 Special requirements for various containers shall comply with Appendix 4. 6 Codes and markings
6.1 Codes for container types
6.1.1 Codes include:
) Arabic numerals, indicating the type of container, such as barrels, cans, etc. b) English numerals, indicating the nature of the material, such as steel, wood, etc.) (if necessary, followed by a digit to indicate the category of the container in the total category. 19263.1—20023
6.1.2 For composite containers, two capital letters shall be written in sequence in the second digit of the code. The first letter indicates the material of the inner container and the second letter indicates the name of the outer container. 6.1.3 For combined containers, the code for the outer container shall be: 6.1.4 The letter \T\, \V\ or "W\" may be added after the container code. The letter \T\ indicates a salvage container that complies with the requirements of the International Road Transport of Dangerous Goods Agreement. The letter \V\ indicates a special container that complies with GB19269.3—20024.1.6. The letter "W\" may be used to indicate the type of container represented by the code, but its specifications are different from those of the specified specifications, but are considered to be equivalent according to the requirements of the International Road Transport of Dangerous Goods Agreement. 6.1.5 The following characters are used to indicate the type of container: 1
2—Wooden barrel!
5——Bag:
Combined packaging!
Standard metal container.
6.1.6 The following is used to indicate the type of material A
Class (one type and surface treatment):
Natural,
F—regeneration technology;
G—red board.
Plastic:
Medical fabrics
One-layer expansion #
Metal (steel or lead)
Glass, porcelain or stoneware
5.1.7 Each The code of the old packaging wearer shall be recorded again. A.5.2 Marking
6.2.1 The mark is used to indicate that the container with this mark has successfully passed the test specified in (B19269,3-2003, and meets the requirements of Appendix A
6.2.2-A wearer shall have a durable, easily recognizable mark that is suitable for the position of the wearer and is small enough to be properly identified, and shall include the addition of the lower capacity. For the total vehicle to confirm the package has passed the k award, the three machine marks The attachment is affixed to the original part or side of the container: the letters, numbers and symbols are engraved on the original part or side of the container: 2mm high. The engraved case is 30 or 0 ks less. The height should be: 1. The capacity is 100 or 100 ks less.
GB19265.1—2003
Marking indicates:
t) Joint packaging symbol. This mark is only used to prove that the container is connected to the normal level of the terminal. Recommendations, ship to recommend> and 19265.5-133, the relevant provisions of the other days. Use embossed gold display, the symbol can be half-stored "UN\" to indicate. Detectors that meet the above regulations can be replaced by the symbol \AIK\ or \UN\ mark. b1 According to 6.. In the code of the type of container, for example 3H1) a two-part book number:
1) a letter support designation to indicate the type of package: Safety indication "packaging type:
indicates the normal type of packaging:
2 indicates the natural packaging fee
2) relatively will share (four decimal places) indicates the relative density for the container without inner group and non-equipment packaging body, and the model has been tested; the whole is not left for 1, 2, this part can be omitted, for the equipment or packaging content container, the maximum total mass indicated by ke is taken into consideration, and the standard gold capacity is The maximum total mass, expressed in kPa, of a liquid that can pass 20 g/s at 23°C when loaded with the following:
Jia Yong Ning Dan\S\Tai Er Container is used to transport solids or inner containers, or containers intended to be filled with concentrated bodies (except combined containers). Before the test, the container has been proven to withstand the test pressure of the liquid, expressed in kPa (kP). Deng Yi Light Cup Standard Gold Screen Container is used to load liquids with a viscosity of 20 g/s at 23°C. When marking the body of a 20J㎡/ ... In the change of this, the code of each area shall be in accordance with the research and development center K1
h strict batch,
5.2.3 According to 6.2.2 Liu narrow marking is not in accordance with the attached requirements B: single or multiple lines, 6.2.4 danger also. 2,2 specified in the long-term design, and the new metal is confirmed by 10n1. The bottom shadow seat is 5.2.2a to c) as the lasting mark, and the well must be at least the same as the full cup of gold change report (blade!). If the last nominal thickness of the two parts of the gold is less than the nominal thickness of the whole body, then the top and the end of the mark are marked in the form of water (for example, pressure effect> at the bottom, for example: .01.21.0 or 0.91.0-1.0\. The original thickness of the metallographic material shall meet the requirements of B/T325. 6.2.5. The additional markings approved by the national competent authority shall ensure that the required certification is accurate and reliable. 6.76 The quality of the system has not changed. The required certification does not have to be permanent (e.g. pressure-sensitive). Each other system shall be marked on the top or side with a permanent shape or (e.g. pressure-sensitive) mark. , 2.2.7 The remaining windshields may be made of materials that can be used (e.g. stainless steel>) and can be in a permanent form (e.g. pressure-sensitive) as described in standard 6, 2.2F) to 5,
6.2.B The marking shall be carried out in the order specified in e.2.2: This section shall be based on the conditions 52.9a) to ) Each marking group required shall be opened to the ground for easy identification and marked in the direction of the record 3.8
6.2.9 After the wearer is repaired, it shall be marked with permanent markings in the following order: Date) Enter your country of residence!
Your factory code:
CB19269.1—2003
c) Year of dream recovery, these mother R” docking G No. 1239, a 2Ca3 has passed the airtightness test. Each Rui container, plus the mother \1”6.2.10 For containers made of “recyclable plastic\ materials defined in Section 1.2 of the Agreement on the Transport of Dangerous Goods by Highways”, they should be marked with “R”. 6.2.11 For the marking examples of the container, refer to the B list. 6.2.12 For pipes made of different materials, refer to the examples in the Appendix, and print the () mark on the packaging container. 19269.1-2003
(Normative record!
Various types of packaging capacity code, identification, requirements, large capacity and net egg coating A.1 Weng various types of packaging capacity can represent, category, requirements, large capacity and related requirements: Table 4.1 Requirements
Non-dynamic impact
Activity benefits
Non-dynamic
1 The body of the code should be inserted into the disk, so that the thickness is suitable. 2 It is intended to be used for the body of the cloth barrel with a thickness of 401 or above. The body of the steel pipe that is inserted into the body of the solid body of the pool below the standard can be welded by hand. The convex edge of the machine core method is used according to the incandescent press. Let the ear If the strength of the ring
award exceeds the circulation body, the through-belt should be equipped with at least two expansion-type rate links or at least two separate degrees of the body. If the separate type is used, it should be fixed on the support and should not be moved or changed. 5. (1.) The copper plug teeth are used for the correct benefits. For example, the opening of the air and the wind should not be too much. The larger threshold will be specified for the new front (13 barrels. The barrel body and the opening of the whole group should be designed and installed to ensure that the price is zero and non-passing under normal operating conditions. The closing device should be properly connected by the machine root method or the rate connection method. Unless the closing device itself is preventive, it should be used according to the same,
station dynamic benefit. The design and delivery of the goods should be done in a way that is consistent with the conditions of transportation. All parts of the barrel should not be made of unnecessary, polluted or dense materials.
? For example, the internal materials used in the equipment and parts should not be sufficient to meet the requirements of the materials being transported, and appropriate internal protective layers or treatments should be applied. Under normal transportation conditions, these layers or treatments should be maintained to maintain their protective properties. All materials should be connected. If there is a quality certificate, it should be strictly followed. 1. The barrel of the goods should usually have at least two expansion options or a mesh. Divide the pipe installation, such as the installation of the market to separate the rising information, the table of safety, should not be based on the strong monitoring point ladder.
4 The activity door 1312 is used for the installation of people before the body or pain, the diameter of the riser to the air and ventilation should be more than 7m, the production will be new E barrels, the body and the mouth of the closed installation should be closed and the objects under the production and transportation should be handled. They are not polluted from the beginning, the installation should be in accordance with the price of the "home environment", so that it is not moistened except for the installation itself. It is necessary to ensure that there are no other sealing parts in the position of the month.
5 The design and transformation of the sealing method of the production should be coordinated, so that the production and transportation conditions are the resources and resources before the production. All the station belts should make the most of the Sichuan consultation diagram and other sealing parts, the hottest
Qi quality!
Jin Guozhou
Non-profit
Non-source dynamic industry
Non-road dynamic British
Activity products
Table 41 continued 2
GB 19269.1—2003
1 and the belt by the system and use of other or more together will make heat, this includes the guest salt barrel Lichuantong·Quick Sichuan made when 4 and foot and other thick materials, 2 knife edge if self-alignment, out of another force training ring, all children's marrow research is welded: 2 capacity people in 6 metal science apartments should be at least several weeks in the six case specifications, or section two points under the rolling swim, such as equipped with tooth open meal filling, the history of the installation of the car is correct, do not consider moving, forest box smaller points
non-active, etc. (11) metal pain of the body hidden on the stand for me, measuring the air and Di K's opening its straight diameter should not be left too much, the opening larger enterprise and the possession will raise the side activity: V2 enterprise into vision. The design of the whole body is suitable for the safety of the equipment. They are easy to fix and not easy to be edited. The equipment is connected properly to prevent accidents. It is not necessary to use the equipment normally. Try to use the original equipment. The new equipment is not in the new installation. The equipment is sealed. The equipment is not leaking under the normal operation inspection conditions. All the equipment used should be made according to the speed and speed of the customer. The material of the plate is appropriate. The flange of the disassembly plan should be connected or welded. Use dry customers:. 4 or less, the diameter of the bag should not exceed 7, and the size should not exceed 31. The design of the device should be tight and leak-proof under the operating conditions. In addition, the storage space itself is made of thermal insulation materials, and the other materials should be considered for use. For example, the material itself can be found in the closed storage technology, and the material itself can be found in the living room. The protective coating treatment of the inner coating should be carried out properly. In the correct learning, The decision to practice the bearing, this is more than the signing after the change of the treatment to maintain its protective performance, the wood used and the seat air-dried, to the commercial requirements of the ten burning teaching company to ensure the effectiveness of the defects, the right month plywood double material is also made of plug, some of the plywood and cavity should be as different as possible.
2 The pre-layer glued memory should be at least one layer of plywood, the use of each layer of cavity plywood, should be cross-linked with water-resistant glue, 3 barrel guard, report the cover of the joint parts according to the customer and the use of the design, 4 to prevent the material method to ensure the position of the bucket leather or other equivalent light village science mechanical seal, pay the black immediate hair add plug The benefits of the project and extend to the entire maintenance plan, 1. The three trays used should be good, efficient, balanced, limited, and social and up-to-date, or other materials that can be used in a sequence of low-energy colors. The old and the whole energy can be used to prevent the dangers of life and pain. The plan should be adapted to the rate and length of the barrel. When the barrel is used, the wood and the material should be taken into consideration. The thickness of the box or the barrel should not exceed one.
4. The barrel should be made of high-quality materials. The barrel chain can be made of * items.
5. The barrel mouth should not exceed half of the height of the barrel board where the mouth is located. 6. The water system should be used with the wine 2C2. The maximum amount of natural production is the middle code of AContainers made of "recyclable plastic" materials as defined in Section 2 shall be marked with "R". 6.2.11 For the marking examples of containers for repair, refer to Appendix B. 6.2.12 For containers made of different materials, refer to the examples in Appendix B. The () mark shall be printed on the packaging container. 19269.1-2003
(Normative record!
Various types of packaging capacity code, identification, requirements, large capacity and net egg coating A.1 Weng various types of packaging capacity can represent, category, requirements, large capacity and related requirements: Table 4.1 Requirements
Non-dynamic impact
Activity benefits
Non-dynamic
1 The body of the code should be inserted into the disk, so that the thickness is suitable. 2 It is intended to be used for the body of the cloth barrel with a thickness of 401 or above. The body of the steel pipe that is inserted into the body of the solid body of the pool below the standard can be welded by hand. The convex edge of the machine core method is used according to the incandescent press. Let the ear If the strength of the ring
award exceeds the circulation body, the through-belt should be equipped with at least two expansion-type rate links or at least two separate degrees of the body. If the separate type is used, it should be fixed on the support and should not be moved or changed. 5. (1.) The copper plug teeth are used for the correct benefits. For example, the opening of the air and the wind should not be too much. The larger threshold will be specified for the new front (13 barrels. The barrel body and the opening of the whole group should be designed and installed to ensure that the price is zero and non-passing under normal operating conditions. The closing device should be properly connected by the machine root method or the rate connection method. Unless the closing device itself is preventive, it should be used according to the same,
station dynamic benefit. The design and delivery of the goods should be done in a way that is consistent with the conditions of transportation. All parts of the barrel should not be made of unnecessary, polluted or dense materials.
? For example, the internal materials used in the equipment and parts should not be sufficient to meet the requirements of the materials being transported, and appropriate internal protective layers or treatments should be applied. Under normal transportation conditions, these layers or treatments should be maintained to maintain their protective properties. All materials should be connected. If there is a quality certificate, it should be strictly followed. 1. The barrel of the goods should usually have at least two expansion options or a mesh. Divide the pipe installation, such as the installation of the market to separate the rising information, the table of safety, should not be based on the strong monitoring point ladder.
4 The activity door 1312 is used for the installation of people before the body or pain, the diameter of the riser to the air and ventilation should be more than 7m, the production will be new E barrels, the body and the mouth of the closed installation should be closed and the objects under the production and transportation should be handled. They are not polluted from the beginning, the installation should be in accordance with the price of the "home environment", so that it is not moistened except for the installation itself. It is necessary to ensure that there are no other sealing parts in the position of the month.
5 The design and transformation of the sealing method of the production should be coordinated, so that the production and transportation conditions are the resources and resources before the production. All the station belts should make the most of the Sichuan consultation diagram and other sealing parts, the hottest
Qi quality!
Jin Guozhou
Non-profit
Non-source dynamic industry
Non-road dynamic British
Activity products
Table 41 continued 2
GB 19269.1—2003
1 and the belt by the system and use of other or more together will make heat, this includes the guest salt barrel Lichuantong·Quick Sichuan made when 4 and foot and other thick materials, 2 knife edge if self-alignment, out of another force training ring, all children's marrow research is welded: 2 capacity people in 6 metal science apartments should be at least several weeks in the six case specifications, or section two points under the rolling swim, such as equipped with tooth open meal filling, the history of the installation of the car is correct, do not consider moving, forest box smaller points
non-active, etc. (11) metal pain of the body hidden on the stand for me, measuring the air and Di K's opening its straight diameter should not be left too much, the opening larger enterprise and the possession will raise the side activity: V2 enterprise into vision. The design of the whole body is suitable for the safety of the equipment. They are easy to fix and not easy to be edited. The equipment is connected properly to prevent accidents. It is not necessary to use the equipment normally. Try to use the original equipment. The new equipment is not in the new installation. The equipment is sealed. The equipment is not leaking under the normal operation inspection conditions. All the equipment used should be made according to the speed and speed of the customer. The material of the plate is appropriate. The flange of the disassembly plan should be connected or welded. Use dry customers:. 4 or less, the diameter of the bag should not exceed 7, and the size should not exceed 31. The design of the device should be tight and leak-proof under the operating conditions. In addition, the storage space itself is made of thermal insulation materials, and the other materials should be considered for use. For example, the material itself can be found in the closed storage technology, and the material itself can be found in the living room. The protective coating treatment of the inner coating should be carried out properly. In the correct learning, The decision to practice the bearing, this is more than the signing after the change of the treatment to maintain its protective performance, the wood used and the seat air-dried, to the commercial requirements of the ten burning teaching company to ensure the effectiveness of the defects, the right month plywood double material is also made of plug, some of the plywood and cavity should be as different as possible.
2 The pre-layer glued memory should be at least one layer of plywood, the use of each layer of cavity plywood, should be cross-linked with water-resistant glue, 3 barrel guard, report the cover of the joint parts according to the customer and the use of the design, 4 to prevent the material method to ensure the position of the bucket leather or other equivalent light village science mechanical seal, pay the black immediate hair add plug The benefits of the project and extend to the entire maintenance plan, 1. The three trays used should be good, efficient, balanced, limited, and social and up-to-date, or other materials that can be used in a sequence of low-energy colors. The old and the whole energy can be used to prevent the dangers of life and pain. The plan should be adapted to the rate and length of the barrel. When the barrel is used, the wood and the material should be taken into consideration. The thickness of the box or the barrel should not exceed one.
4. The barrel should be made of high-quality materials. The barrel chain can be made of * items.
5. The barrel mouth should not exceed half of the height of the barrel board where the mouth is located. 6. The water system should be used with the wine 2C2. The maximum amount of natural production is the middle code of AContainers made of "recyclable plastic" materials as defined in Section 2 shall be marked with "R". 6.2.11 For the marking examples of containers for repair, refer to Appendix B. 6.2.12 For containers made of different materials, refer to the examples in Appendix B. The () mark shall be printed on the packaging container. 19269.1-2003
(Normative record!
Various types of packaging capacity code, identification, requirements, large capacity and net egg coating A.1 Weng various types of packaging capacity can represent, category, requirements, large capacity and related requirements: Table 4.1 Requirements
Non-dynamic impact
Activity benefits
Non-dynamic
1 The body of the code should be inserted into the disk, so that the thickness is suitable. 2 It is intended to be used for the body of the cloth barrel with a thickness of 401 or above. The body of the steel pipe that is inserted into the body of the solid body of the pool below the standard can be welded by hand. The convex edge of the machine core method is used according to the incandescent press. Let the ear If the strength of the ring
award exceeds the circulation body, the through-belt should be equipped with at least two expansion-type rate links or at least two separate degrees of the body. If the separate type is used, it should be fixed on the support and should not be moved or changed. 5. (1.) The copper plug teeth are used for the correct benefits. For example, the opening of the air and the wind should not be too much. The larger threshold will be specified for the new front (13 barrels. The barrel body and the opening of the whole group should be designed and installed to ensure that the price is zero and non-passing under normal operating conditions. The closing device should be properly connected by the machine root method or the rate connection method. Unless the closing device itself is preventive, it should be used according to the same,
station dynamic benefit. The design and delivery of the goods should be done in a way that is consistent with the conditions of transportation. All parts of the barrel should not be made of unnecessary, polluted or dense materials.
? For example, the internal materials used in the equipment and parts should not be sufficient to meet the requirements of the materials being transported, and appropriate internal protective layers or treatments should be applied. Under normal transportation conditions, these layers or treatments should be maintained to maintain their protective properties. All materials should be connected. If there is a quality certificate, it should be strictly followed. 1. The barrel of the goods should usually have at least two expansion options or a mesh. Divide the pipe installation, such as the installation of the market to separate the rising information, the table of safety, should not be based on the strong monitoring point ladder.
4 The activity door 1312 is used for the installation of people before the body or pain, the diameter of the riser to the air and ventilation should be more than 7m, the production will be new E barrels, the body and the mouth of the closed installation should be closed and the objects under the production and transportation should be handled. They are not polluted from the beginning, the installation should be in accordance with the price of the "home environment", so that it is not moistened except for the installation itself. It is necessary to ensure that there are no other sealing parts in the position of the month.
5 The design and transformation of the sealing method of the production should be coordinated, so that the production and transportation conditions are the resources and resources before the production. All the station belts should make the most of the Sichuan consultation diagram and other sealing parts, the hottest
Qi quality!
Jin Guozhou
Non-profit
Non-source dynamic industry
Non-road dynamic British
Activity products
Table 41 continued 2
GB 19269.1—2003
1 and the belt by the system and use of other or more together will make heat, this includes the guest salt barrel Lichuantong·Quick Sichuan made when 4 and foot and other thick materials, 2 knife edge if self-alignment, out of another force training ring, all children's marrow research is welded: 2 capacity people in 6 metal science apartments should be at least several weeks in the six case specifications, or section two points under the rolling swim, such as equipped with tooth open meal filling, the history of the installation of the car is correct, do not consider moving, forest box smaller points
non-active, etc. (11) metal pain of the body hidden on the stand for me, measuring the air and Di K's opening its straight diameter should not be left too much, the opening larger enterprise and the possession will raise the side activity: V2 enterprise into vision. The design of the whole body is suitable for the safety of the equipment. They are easy to fix and not easy to be edited. The equipment is connected properly to prevent accidents. It is not necessary to use the equipment normally. Try to use the original equipment. The new equipment is not in the new installation. The equipment is sealed. The equipment is not leaking under the normal operation inspection conditions. All the equipment used should be made according to the speed and speed of the customer. The material of the plate is appropriate. The flange of the disassembly plan should be connected or welded. Use dry customers:. 4 or less, the diameter of the bag should not exceed 7, and the size should not exceed 31. The design of the device should be tight and leak-proof under the operating conditions. In addition, the storage space itself is made of thermal insulation materials, and the other materials should be considered for use. For example, the material itself can be found in the closed storage technology, and the material itself can be found in the living room. The protective coating treatment of the inner coating should be carried out properly. In the correct learning, The decision to practice the bearing, this is more than the signing after the change of the treatment to maintain its protective performance, the wood used and the seat air-dried, to the commercial requirements of the ten burning teaching company to ensure the effectiveness of the defects, the right month plywood double material is also made of plug, some of the plywood and cavity should be as different as possible.
2 The pre-layer glued memory should be at least one layer of plywood, the use of each layer of cavity plywood, should be cross-linked with water-resistant glue, 3 barrel guard, report the cover of the joint parts according to the customer and the use of the design, 4 to prevent the material method to ensure the position of the bucket leather or other equivalent light village science mechanical seal, pay the black immediate hair add plug The benefits of the project and extend to the entire maintenance plan, 1. The three trays used should be good, efficient, balanced, limited, and social and up-to-date, or other materials that can be used in a sequence of low-energy colors. The old and the whole energy can be used to prevent the dangers of life and pain. The plan should be adapted to the rate and length of the barrel. When the barrel is used, the wood and the material should be taken into consideration. The thickness of the box or the barrel should not exceed one.
4. The barrel should be made of high-quality materials. The barrel chain can be made of * items.
5. The barrel mouth should not exceed half of the height of the barrel board where the mouth is located. 6. The water system should be used with the wine 2C2. The maximum amount of natural production is the middle code of AThe barrel of the object should usually have at least two expansion options or a network of pipes under the installation, such as when the market rises separately, the table of safety and clarity should not be based on the movement: strong at ten monitoring points.
4 The door 1312 is used for the installation of people or animals. The diameter of the air and ventilation opening should be more than 7m. The new E barrel should be sealed and the equipment and objects should be transported under the closed body and closed. They need not be polluted from the beginning. The installation environment should be in accordance with the price. In addition to the equipment itself, it must be ensured that it is not moistened. Whether the position is outside the month or not, other sealing parts should be sealed.
5 The design and installation of the sealing method of the activity should be coordinated. The efficiency of the production and transportation should be the resources and resources. All the station belts should make the most of the sealing parts. The most popular
Qi quality!
Jin Guozhou
Non-profit
Non-source industry
Non-road activity English
Activity products
Table 41 Continued 2
GB 19269.1—2003
1 and the belt by the system and use of other than the contention or more will be combined to make heat, this includes the barrel of the guest salt Lichuan Tong·Kuaichuan made when the 4 and foot and other thick materials, 2 knife edge if the self-positioning, out of another force training ring, all children's marrow research is welded: 2 capacity people in 6 gold science should be at least a few weeks in the six-case model, or section two points under the rolling travel, such as with open-type meal filling, the history of the installation of the car is correct, do not consider moving, the box is smaller
non-active, etc. (11) metal pain of the body hidden on the stand for our people, measuring space and Di K's opening its straight diameter should not be left too much, the opening larger enterprise and will raise the side activity: V2 enterprise into view. The overall benefit of the design of the Yang stomach I safety technology should be in the stop talk operation conditions, it tt||, the new monitoring is all the same. The closed installation is not left in the new installation. The bottom is in the normal operation inspection. It is true that there is no leakage in the country. All activities use the trailer or other towing parts. The belt should be less than 9 teachings or products will be brushed. It should be based on the speed of the passengers and the way. The material of the black plate number is enough. The convex edge of the 2-disassembly plan should be connected or welded. The above liquid cattle are difficult to deliver nuclear health packages. For installation less than 4 or other lake points, please be careful to find the secret method of delivery or quick delivery. For the carrying box, all the aids should be beside the stove. If there is a nest of carrying health, some such as· The diameter of the reinforcing ring shall not exceed 7, and the diameter of the ring shall not exceed 7. For more non-
, the movable type (2 and 31, the design of the device is always tight and leak-proof under the operating conditions, except: the female room is made of the stomach itself, and the other materials used should be considered for thermal and sound management.
1 If you are careful, the material itself may be inconsistent with the material itself, and the closed technical control warehouse connection parts are not compatible with the material itself, the internal protective coating of the plan is properly treated, and the wood and the seat are air-dried. To meet the commercial requirements, there are ten defects in the use of the company for the correct use of the efficiency of the Sichuan, and the materials outside the right month plywood are also made of plug-in, and some of them should be distinguished from the cavity plywood.
2 The pre-layer glue should be less than the pre-layer glue In the event of a problem, at least one layer of plywood should be used. Each layer of plywood should be cross-bonded and glued to the same place. 3. The barrel should be covered according to the customer's design and usage rate. 4. To prevent the material from being loaded, use bucket leather or other equivalent light-weight mechanical seals. The black immediate increase in the use of the plug-in process should be extended to the entire maintenance plan. 1. The three plates used should be good, efficient, balanced, and limited to the use of low-energy materials, or other materials that can be used to make the old and low-energy materials suitable for the quality and quality of the barrel. After the barrel is used, the wood and material should not exceed the thickness of the box or the barrel. 4. The barrel should be made of high-quality materials. The barrel chain can be made of * items.
5 This system can effectively double the barrel mouth should not be more than half of the barrel board height, 6 water system with wine 2C2. The capture volume is naturally the most human code in the AThe barrel of the object should usually have at least two expansion options or a network of pipes under the installation, such as when the market rises separately, the table of safety and clarity should not be based on the movement: strong at ten monitoring points.
4 The door 1312 is used for the installation of people or animals. The diameter of the air and ventilation opening should be more than 7m. The new E barrel should be sealed and the equipment and objects should be transported under the closed body and closed. They need not be polluted from the beginning. The installation environment should be in accordance with the price. In addition to the equipment itself, it must be ensured that it is not moistened. Whether the position is outside the month or not, other sealing parts should be sealed.
5 The design and installation of the sealing method of the activity should be coordinated. The efficiency of the production and transportation should be the resources and resources. All the station belts should make the most of the sealing parts. The most popular
Qi quality!
Jin Guozhou
Non-profit
Non-source industry
Non-road activity English
Activity products
Table 41 Continued 2
GB 19269.1—2003
1 and the belt by the system and use of other than the contention or more will be combined to make heat, this includes the barrel of the guest salt Lichuan Tong·Kuaichuan made when the 4 and foot and other thick materials, 2 knife edge if the self-positioning, out of another force training ring, all children's marrow research is welded: 2 capacity people in 6 gold science should be at least a few weeks in the six-case model, or section two points under the rolling travel, such as with open-type meal filling, the history of the installation of the car is correct, do not consider moving, the box is smaller
non-active, etc. (11) metal pain of the body hidden on the stand for our people, measuring space and Di K's opening its straight diameter should not be left too much, the opening larger enterprise and will raise the side activity: V2 enterprise into view. The overall benefit of the design of the Yang stomach I safety technology should be in the stop talk operation conditions, it tt||, the new monitoring is all the same. The closed installation is not left in the new installation. The bottom is in the normal operation inspection. It is true that there is no leakage in the country. All activities use the trailer or other towing parts. The belt should be less than 9 teachings or products will be brushed. It should be based on the speed of the passengers and the way. The material of the black plate number is enough. The convex edge of the 2-disassembly plan should be connected or welded. The above liquid cattle are difficult to deliver nuclear health packages. For installation less than 4 or other lake points, please be careful to find the secret method of delivery or quick delivery. For the carrying box, all the aids should be beside the stove. If there is a nest of carrying health, some such as· The diameter of the reinforcing ring shall not exceed 7, and the diameter of the ring shall not exceed 7. For more non-
, the movable type (2 and 31, the design of the device is always tight and leak-proof under the operating conditions, except: the female room is made of the stomach itself, and the other materials used should be considered for thermal and sound management.
1 If you are careful, the material itself may be inconsistent with the material itself, and the closed technical control warehouse connection parts are not compatible with the material itself, the internal protective coating of the plan is properly treated, and the wood and the seat are air-dried. To meet the commercial requirements, there are ten defects in the use of the company for the correct use of the efficiency of the Sichuan, and the materials outside the right month plywood are also made of plug-in, and some of them should be distinguished from the cavity plywood.
2 The pre-layer glue should be less than the pre-layer glue In the event of a problem, at least one layer of plywood should be used. Each layer of plywood should be cross-bonded and glued to the same place. 3. The barrel should be covered according to the customer's design and usage rate. 4. To prevent the material from being loaded, use bucket leather or other equivalent light-weight mechanical seals. The black immediate increase in the use of the plug-in process should be extended to the entire maintenance plan. 1. The three plates used should be good, efficient, balanced, and limited to the use of low-energy materials, or other materials that can be used to make the old and low-energy materials suitable for the quality and quality of the barrel. After the barrel is used, the wood and material should not exceed the thickness of the box or the barrel. 4. The barrel should be made of high-quality materials. The barrel chain can be made of * items.
5 This system can effectively double the barrel mouth should not be more than half of the barrel board where the mouth is located, 6 water system with wine 2C2. The capture volume is naturally the most human code in the middle A
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.