title>JB/T 5914-1991 Method for compiling product models of electrostatic precipitators - JB/T 5914-1991 - Chinese standardNet - bzxz.net
Home > JB > JB/T 5914-1991 Method for compiling product models of electrostatic precipitators
JB/T 5914-1991 Method for compiling product models of electrostatic precipitators

Basic Information

Standard ID: JB/T 5914-1991

Standard Name: Method for compiling product models of electrostatic precipitators

Chinese Name: 电除尘器 产品型号编制方法

Standard category:Machinery Industry Standard (JB)

state:Abolished

Date of Release1991-12-25

Date of Implementation:1992-10-01

Date of Expiration:2005-04-15

standard classification number

Standard Classification Number:Machinery>>General Machinery and Equipment>>J88 Environmental Protection Equipment

associated standards

Publication information

other information

Focal point unit:Zhuji Electroluminescent Device Institute

Introduction to standards:

JB/T 5914-1991 Method for compiling product models of electrostatic precipitators JB/T5914-1991 Standard download decompression password: www.bzxz.net

Some standard content:

Machinery Industry Standard of the People's Republic of China
JB/T5914-91
Method for compiling product models of electrostatic precipitators
Published on December 25, 1991
Published by the Ministry of Machinery and Electronics Industry of the People's Republic of China
Implementation on October 1, 1992
Subject content
Mechanical Industry Standard of the People's Republic of China
Method for compiling product models of electrostatic precipitators
This standard specifies the method for compiling product models of electrostatic precipitators. Cited standards
ZBJ88001.2 Types and basic parameters of electrostatic precipitators 3 Composition of product models
The product model consists of the first letters of the Chinese phonetic alphabet (or specific codes) and Arabic numerals, as follows: JB/T5914-91
Electric field number, when there are more than two, it is represented by Arabic numerals, and when there is one, it is not represented by the flue gas flow area, m2
Product characteristic code, the structural type is represented by the letters specified in Table 1, and the specific codes specified in Table 2 are used to represent the electrostatic precipitator code, represented by D
Ordinary conventional electrostatic precipitators are represented by P (Pu) in the model, and special electrostatic precipitators are represented by the codes specified in Table 1 according to the contents described in Chapter 2 of ZBJ88001.2.
Product features
High temperature electrostatic precipitatorwwW.bzxz.Net
High pressure electrostatic precipitator
Corrosion-resistant electrostatic precipitator
Explosion-proof electrostatic precipitator
Approved by the Ministry of Machinery and Electronics Industry on December 25, 1991
Implemented on October 1, 1992
Structural type
Dry plate vertical electrostatic precipitator| |tt||Dry plate type horizontal electrostatic precipitator
Dry tube type vertical electrostatic precipitator
Dry tube type horizontal electrostatic precipitator
Wet plate type vertical electrostatic precipitator
Wet plate type horizontal electrostatic precipitator
Wet tube type vertical electrostatic precipitator
Wet tube type horizontal electrostatic precipitator
JB/T5914—91
Example 1: DAP100--3 type electrostatic precipitator, indicating a dry plate vertical conventional electrostatic precipitator, with a flue gas flow area of ​​100m2, 3 electric fields. Example 2: DBY189-4 type electrostatic precipitator, indicating a dry plate horizontal high-pressure electrostatic precipitator, with a flue gas flow area of ​​189m*, 4 electric fields. Example 3: DBP40-2 type electrostatic precipitator, indicating a dry plate horizontal ordinary electrostatic precipitator, with a flue gas flow area of ​​40m2, 2 electric fields; Example 4: DDF15 type electrostatic precipitator, indicating a dry tube horizontal anti-corrosion type electrostatic precipitator, with a flue gas flow area of ​​15m2, 1 electric field; Example 5: DBP15 type electrostatic precipitator, indicating a dry plate horizontal ordinary electrostatic precipitator, with a flue gas flow area of ​​15m2, 1 electric field. Additional notes:
This standard is proposed and managed by Zhejiang Zhuji Electrostatic Precipitator Research Institute. This standard was drafted by Zhejiang Zhuji Electrostatic Precipitator Research Institute. The main drafter of this standard is Chen Guowei.
People's Republic of China
Mechanical Industry Standard
Electrostatic Precipitator Product Model Compilation Method
JB/T5914-91
Published and distributed by the Mechanical Standardization Research Institute of the Ministry of Machinery and Electronics Industry, Postal Code 100081)
(PO Box 8144, Beijing
Copyright reserved
Reproduction prohibited
Printed by Printing Factory, Qinghe County, Hebei Province
Format 880×1230
Sheet 3/8
Word count 4000
First printing in March 1992
First edition in March 1992
Print count 00.001-1000
No. 0501
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.