HG 3167-1986 Mixing shaft diameter series
Basic Information
Standard ID:
HG 3167-1986
Standard Name: Mixing shaft diameter series
Chinese Name:
搅拌轴轴径系列
Standard category:Chemical industry standards (HG)
state:Abolished
Date of Release1986-08-15
Date of Implementation:1986-10-01
Date of Expiration:2006-07-01
standard classification number
Standard ICS number:Chemical Technology>>Chemical Equipment>>71.120.99 Other Chemical Equipment
Standard Classification Number:Chemical Industry>>Chemical Machinery and Equipment>>G92 Chemical Machinery
Publication information
other information
Introduction to standards:
Original standard number ZB G92001-86 HG 3167-1986 Stirring shaft diameter series HG3167-1986 Standard download decompression password: www.bzxz.net
Some standard content:
Professional Standard of the People's Republic of China
ZBG92001-86
Adjusted to: HG 317-f86
Agitator shaft diameter series
Lines of agitator shaft diameters1988-08--15Published
198610-01Implementation
Approved by the Ministry of Chemical Industry of the People's Republic of ChinaProfessional Standard of the People's Republic of China
Agitator shaft diameter series
Lines of agitator shaft digmetersThis standard applies to the agitator shaft of vertical agitator equipment. The shaft diameter series parameters are specified in the following table:
Agitator shaft nominal diameter
Note: The agitator shaft nominal diameter refers to the shaft diameter of the agitator shaft passing through the stuffing box or mechanical seal. The values in brackets are not recommended.
Boldface indicates the preferred value.
Nominal diameter of stirring shaft
ZB G 92001- 88
Additional remarks:
This standard was proposed by the Ministry of Chemical Industry of the People's Republic of China and drafted by the Chemical Machinery Research Institute of the Ministry of Chemical Industry. The drafter of this standard is Zhang Maowen.
The Ministry of Chemical Industry of the People's Republic of China issued it on August 15, 1986 and implemented it on October 1, 1986
The People's Republic of China
Professional Standard
Agitator Shaft Diameter Series
2BG92001—86
Published by China Standards Press
(Beijing Fuwai Sanlihe)
National Standard Xiong Press Printed by Qinhuangdao Printing Factory 28f -L91e hbzxZ.net
98--100z6-9 8z-
Xinhua Store Beijing Distribution Office Distributed Sold by Xinhua Bookstores in various places F version 880 × 1230 1/16 Printing sheet 1/4 Number 2,000 First edition in August 1987
First printing in August 1987
Print run 1-3:400
Book number: 15169·2-6742 Price 0.13 yuan*
Standard date 71--35
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.