Some standard content:
This standard makes the following provisions for /T:33H5-188% of the national GB/1336 applicable to the packaging standard. GB/T13385-2034
Added and clarified the product packaging drawings: packaging color drawings, packaging assembly drawings, packaging accessories, packaging parts drawings, and examples of packaging drawings that are not related to transport packaging. Appendix A of this standard is a consumption appendix. This standard is proposed by China Packaging General Corporation
This standard is issued by the National Packaging Standardization Technical Committee. The main units of this standard are: Machinery Science Research Institute, China Packaging Product Quality Certification Center, Beijing Hua F Yunjian Packaging Co., Ltd., Beijing Beiyi CNC Group Co., Ltd., Beijing Yishi Keke Wilcox Co., Ltd., Shanghai Electric! Hou Xijiao Fan! Co., Ltd.:
Main starting point of the standard: no snow, no profit, no hair, pure and pure, product period Gu Ying Han Zhao strives to 1 standard medical
Packaging drawing requirements
6 The standard stipulates the basic requirements for the packaging drawings (hereinafter referred to as detailed) of the packaging factory. The standard is used for the packaging of products and the packaging is not taken into account. 2 Normative references
GB/T13385—2004
The following documents are quoted in this standard and become the terms of this standard. For application documents without an explicit date, any subsequent receipt (excluding incorrect contents) or your version is not applicable to this standard. However, the parties who have reached an agreement on this standard are encouraged to study whether the extended versions of these documents can be used. For customary documents without an explicit date, the latest version is applicable to this standard. GB3/T106C9.1 Technical production rate title
GB/T106C9.3 Technical drawing
Table
GB/T12S8F Carton drawing
GRT 13HG:
GB:T1468
Gk5 14e50
+B/ 1469
Technical drawing
Terms of use
"Paper size grid"
Technical drawing
Technical drawing
GT/T1675.1 Simplified representation of technical micro-graphs: Part 2: Dimensions GB/T 16675.2 Simplified representation of technical drawings: Part 2: Dimensions GB/T 1'450
GB/T1745
GR/T 17452
GB/T17453
G5/T 1822
3 Terminology
Technical drawing
Drawings
Technical drawing
Special view and section
Technical drawing
Technical. Representation of section area for technical production C.AT>Engineering production standard
GB/113351 and the following definitions are used in this standard 3.1
Product packaging Figure
shows the necessary data and technical requirements of the packaging components and their relationship with the packaging product,
figureofpackagingcoatainershows the structure, size and performance of the auxiliary packaging. L Packaging drawing requirements
4.1 The packaging drawings should be correct, complete, unified and clear. 4.2 The shapes, characters, symbols, technical codes, and supervisory units on the packaging drawings should comply with the relevant international standards. 2,3 The visual and technical requirements on the packaging drawings should clearly show the structure, size and relationship of the product packaging, packaging containers or packaging parts and components, as well as the technical requirements for manufacturing and inspection. Under the conditions of meeting the above requirements, the number of visuals should be clearly shown 1
CB/T13385—2004
1. 4. The packaging drawing should be made as much as possible on one sheet of paper. If it must be distributed on several sheets of drawings, the main drawing should be made, and the length and detail columns should be the final assembly drawing of the product packaging.
4.5 The name of the product packaging device and the packaging name should be filled in as accurately as possible and conform to the relevant standards. 4.6 If the packaging drawing does not list specific packaging requirements, please read it carefully. In order to ensure the quality of the packaging, please mark the "method" and "technical instructions".
4.7 The packaging drawing should be made according to the provisions of the project contract. 4.B The packaging column should be carefully drawn and should conform to the requirements of the relevant standards. 92.5 Drawing design
5.1 Drawing size and format
The size of the packaging drawing shall comply with the provisions of 115. 5.2 The title bar and detailed list of the packaging drawingbzxz.net
The packaging drawing format shall comply with B/T 163.1 and B/T 163.3: The name and number of the packaging product shall be written in the title bar. The detailed list shall include the code, name, specification, quality and quantity of the packaging materials.
5.3 Proportion of the sample
The packaging drawing shall comply with the relevant provisions of B/T 163.4. In special circumstances, it may not be drawn in proportion and the scale shall not be marked.
5.4 Dimension annotation of the drawing
The size annotation of the packaging drawing shall comply with the relevant provisions of GR1 and GR2. The size of the drawings without drawings can be noted in the detailed list of drawings.
5.5 Fonts and colors of drawings The drawing style of drawings shall comply with the relevant provisions of GH/T146S】, 6.6 Drawing lines
The drawing lines of drawings shall comply with the relevant provisions of T17:, 5.7 Technical requirements on drawings
5.7.1 The technical requirements written on drawings shall be concise, clear and easy to understand. 57.2 The technical requirements should be numbered in sequence, but not in order. The technical requirements should be written below the title.
5.7.3 The content of technical requirements generally includes: a) basic requirements for packaging materials, auxiliary packaging materials and packaging tapes; b) packaging method and necessary workmanship requirements; c) special requirements for packaging storage and transportation methods; e) requirements for packaging integrity inspection and shooting; f) requirements for size and shape of packaging samples that are difficult to express in the text; and other relevant instructions.
5.7.4 When calling for categories, specifications and methods in the technical requirements, the standard number and name should be indicated.
The packaging drawings should comply with the relevant provisions of GB/T 16675.1. Under the condition that the working conditions of packaging are clear, the packaging design can be selected. 5. Cross-section number and surface method 6.1.1 Surface number CA, T13385—2004 The function of packaging design, surface area indication shall comply with the relevant provisions of GT/T17152 and G/T73. The packaging design and the surface load of the agent shall meet the requirements of the whole surface. In special cases, it can be implemented according to relevant standards or regulations. Table 1 Section drawing method dedicated to packaging drawings
Combined rice
Not in line with the effect
Creative flower teaching
Shrimp standard board
6.1.2 Section drawing method
Creative mud two
Wade turning egg release
Calcium plastic random play
(Not in line with the effect)
6.1.2.1 The section equal signs, directions and spacing of the sectional drawings and the surface drawings in the same packaging container parts drawing should be consistent. 6.1.2.2 In the packaging container drawing, when the cut surface symbols of the packaging container parts are the same, the difference between the distance and the density should be used to indicate the difference. 6.1.2.3 When the vertical shape of the packaging container and its parts is large, the cut surface symbol should be drawn along the solid edge. For the parts with no surface defects, the cut surface symbol can be drawn instead of the part surface symbol. For the packaging materials such as glass, which are not suitable for cutting, the cut surface symbol can be omitted. When the two adjacent surfaces are evenly spaced, a space of not less than . 6.1.2.4 In order to indicate the type of other materials, in the absence of special conditions, the legend (without Table 2) can be used to indicate the appearance of the whole or all. As the packaging material mark (with Section 1) Table 2 Drawing of uncut packaging materials
Glass and other transparent
Bamboo woven plastic plate
GB/T13385-2C04
6.> Product packaging drawing
Product packaging includes: packaging shape, packaging assembly, packaging container drawing, packaging parts drawing. 6.2.1 Packaging appearance drawing
The packaging appearance drawing should include: shipping and receiving marks, labeling center, product type and manufacturer name, packaging process, export products should correspond to the Chinese medicine delivery,
6.2.2. Packaging assembly drawing
The assembly drawing should include the main dimensions of the packaged product in the packaging! The structure and assembly requirements of the packaging container, packaging materials, general punching materials, lining materials, and the appearance, structure, location and code of additional parts, seals, etc.; product assembly technical requirements and detailed description,
6.2.3 Packaging assembly drawing
The packaging assembly drawing should include: the style, material, quality and technical requirements of the packaging container, and the assembly equipment should meet the following requirements: a) Draw the packaging container (tray, chassis) drawing, and provide its matching drawings or shape drawings, and attach local production drawings and department drawings, when the product is packaged.! When assembling drug packaging, it is not necessary to draw the assembly drawings. The appearance drawings should be marked in the order and the relevant instructions on sealing and opening should be provided.
) When making drawings of the whole packaging equipment for sale: When drawing drawings of parts of the packaging equipment for drug seasoning, the relevant standards should be followed. When making drawings of bags, etc., the relevant standards should be followed: e) For packaging with more complex structure than the teaching teaching, the assembly drawings should be marked with the parts number of the packaging container, and the name of the parts should be filled in the column of the medical equipment assembly number. The quality, specifications, and numbers of the packaging containers should be marked on the drawings. The allowable quality limit of the drug packaging product should be noted in the use of the drawings.
6. 2.4 Packaging Components Drawings Packaging components drawings should include: size, material, quantity and technical requirements of packaging components. Drawing of component drawings should meet the following requirements and show the packaging capacity of the device. If the packaging and packaging of the device are not uniform or rare, this drawing is called the packaging component drawing. The packaging component drawing must show the required position, shape and shape of the device. Dimensions shall be marked on the customer's assembly drawings when the parts are assembled, and the correct size shall be specified on the technical card when required. When there are correct blood requirements for the packaging container, the manufacturer shall indicate the technical requirements on the specification to allow the purchased parts or finished products to be inspected by the manufacturer. Purchased parts or finished products that need to be manufactured shall be marked with the production drawings, and the drawings shall be marked in the view. 6.3 Product packaging display method
6.3.1 In order to clearly express the requirements of the product packaging, when making the product packaging inspection diagram, the necessary schematic diagram or drawing shall be added;
oil belt:
strong reach
Figure 1 also shows the schematic diagram of the product packaging structure Gn/T 13385—2004
6.3.2 In the packaging drawings, the packaged products are indicated by double dots and lines, and the small numbers are not marked in the drawings (see Figure 2, Figure 3). The fixed, protected, etc. of the packaged products in the container are indicated by written drawings, and can be described in words. If the fixed, protected, etc. of the product need to be confirmed, it shall not be drawn. If the product needs to be specially reinforced inside, the part that needs to be specially reinforced shall be noted in the Figure 3. View representation
Not yet prepared
Figure 2 Method of representing the internal structure of a product packaging container by schematic drawing method 5
GB/T13385—2004
Airtight agent
3 Method of representing the internal structure of a product packaging container by schematic drawing method
6.3.3 If the packaging volume used by the packaged product is close to the average height and the size is not large, it is allowed to produce 7 packaging diagrams 1. Use a table diagram to produce other packaged products 6.3.4 If the micro-packaged product is packaged in a box with different equipment or multiple pieces in a mother box, a fine solid line can be used on the product packaging to indicate the placement of each piece, and on the lead line: note the name, number or sample code (W lead 4), and the three-dimensional card
production degree
1, etc. and
Figure 4 also indicates the position of the host and the corresponding parts. 6.3.5 When the technical conditions are correct or there are other packaging components, In the case of a partial diagram, the product packaging may use a simplified schematic diagram to indicate the necessary requirements such as the appearance, installation and connection dimensions (Figure 5). 6
Figure 5 uses a simplified method of showing the position of the product in the package. 6.4 Commercial method of product packaging drawings
GB/r13385—2004
6.4:1 When the structure and process of the packaging parts are clear, this structure can be omitted. When not noted in the technical requirements. 6.4.2 When there is a very small diameter in the package and its part, two short thin solid lines or dots can be used to indicate its position, and then the size can be marked as the connection part code, name and effect. 6.4.3 The small pressure point and the line center position on the screw thread can be seen in Figures 6 and 7. The lead line can be used to prevent the force from being applied, and the name and code are reduced as required by the table &. Figure 6 shows a partial schematic diagram. :20
Figure shows the schematic diagram of the local
GB/T13385—20C4
Medical connection method
Item except for the continuous
Due to the extension
For the large-scale connection
The connection
The connection
Long connection
Table 3 Inspection and specification representation method
5.4.4 In the figure of the structure of the extension, only part can be drawn, and the other parts shall be drawn in accordance with the provisions of GB/T13385;.
GB/T13385—2004
8/133852004
CB/T13385—20042 In the packaging container drawing, the packaged product is indicated by double dots and strokes, and the small numbers are not marked in the drawing (see Figure 2, Figure 3). The fixed, protected, etc. of the packaged product in the container are indicated by a written diagram, and can be described in words. If the fixation, protection, etc. of the product need to be confirmed, it shall not be drawn. The product position that requires special reinforcement inside shall be indicated in the partial view of Figure 3.
Not specified
Figure 2 uses the method of drawing to indicate the internal structure of the product packaging container 5
GB/T133 85—2004
avoiding agent space
3 How to use schematic method to represent product packaging structure
6.3.3 If the packaging capacity of the packaged product is close to the size and the size is not large, it is allowed to use a table diagram in the production packaging drawing to indicate the name and quantity of the other packaged products: 6.3.4 If the micro-packaged product is packaged in a box or multiple-piece mother box, the product packaging can be represented by a thin solid line with dots and dots, and the name, number or sample code can be noted on the lead line: W cited 4), three-tenths card
production degree
1 and other parallel guns
Figure 4 shows the host and the corresponding parts at the same time. 6.3.5 When the T process conditions are correct or there are other component diagrams, the product packaging can use a simplified schematic diagram to clearly mark the necessary external installation and connection dimensions and other requirements (Figure 5) 6
Figure 5 uses a simplified method to show the position of the product in the package. 6.4 Commercial method of product packaging drawings
GB/r13385-2004
6.4:1 In the packaging, the components can be placed When the structure and process of its parts are clear, this structure can be omitted. It should be noted in the technical requirements. 6.4.2 When there is a very small diameter in the package and its parts, two short thin solid lines or dots can be used to indicate its position, and then the size of the parts can be marked, and the name and function of the parts can be marked. 6.4.3 The small pressure point and the center of the line on the screw thread can be seen in Figure 6 and Figure 7. The lead line is used to prevent the force from being pulled up, and the name and code are reduced in accordance with the regulations. Figure 6 shows a partial schematic diagram. :20
Figure shows the schematic diagram of the local
GB/T13385—20C4
Medical connection method
Item except for the continuous
Due to the extension
For the large-scale connection
The connection
The connection
Long connection
Table 3 Inspection and specification representation method
5.4.4 In the figure of the structure of the extension, only part can be drawn, and the other parts shall be drawn in accordance with the provisions of GB/T13385;.
GB/T13385—2004
8/133852004
CB/T13385—20042 In the packaging container drawing, the packaged product is indicated by double dots and strokes, and the small numbers are not marked in the drawing (see Figure 2, Figure 3). The fixed, protected, etc. of the packaged product in the container are indicated by a written diagram, and can be described in words. If the fixation, protection, etc. of the product need to be confirmed, it shall not be drawn. The product position that requires special reinforcement inside shall be indicated in the partial view of Figure 3.
Not specified
Figure 2 uses the method of drawing to indicate the internal structure of the product packaging container 5
GB/T133 85—2004
avoiding agent space
3 How to use schematic method to represent product packaging structure
6.3.3 If the packaging capacity of the packaged product is close to the size and the size is not large, it is allowed to use a table diagram in the production packaging drawing to indicate the name and quantity of the other packaged products: 6.3.4 If the micro-packaged product is packaged in a box or multiple-piece mother box, the product packaging can be represented by a thin solid line with dots and dots, and the name, number or sample code can be noted on the lead line: W cited 4), three-tenths card
production degree
1 and other parallel guns
Figure 4 shows the host and the corresponding parts at the same time. 6.3.5 When the T process conditions are correct or there are other component diagrams, the product packaging can use a simplified schematic diagram to clearly mark the necessary external installation and connection dimensions and other requirements (Figure 5) 6
Figure 5 uses a simplified method to show the position of the product in the package. 6.4 Commercial method of product packaging drawings
GB/r13385-2004
6.4:1 In the packaging, the components can be placed When the structure and process of its parts are clear, this structure can be omitted. It should be noted in the technical requirements. 6.4.2 When there is a very small diameter in the package and its parts, two short thin solid lines or dots can be used to indicate its position, and then the size of the parts can be marked, and the name and function of the parts can be marked. 6.4.3 The small pressure point and the center of the line on the screw thread can be seen in Figure 6 and Figure 7. The lead line is used to prevent the force from being pulled up, and the name and code are reduced in accordance with the regulations. Figure 6 shows a partial schematic diagram. :20
Figure shows the schematic diagram of the local
GB/T13385—20C4
Medical connection method
Item except for the continuous
Due to the extension
For the large-scale connection
The connection
The connection
Long connection
Table 3 Inspection and specification representation method
5.4.4 In the figure of the structure of the extension, only part can be drawn, and the other parts shall be drawn in accordance with the provisions of GB/T13385;.
GB/T13385—2004
8/133852004
CB/T13385—2004
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.