This standard specifies the format, content and filling regulations of the "product variety file card" (hereinafter referred to as "variety card" or "card") for filing a case for product varieties with production capacity. This standard is applicable to the filing of a case for finalized product varieties, and can be used as the basis for various management work of industrial enterprises and management departments at all levels on product varieties. It is also applicable to the filing management of other non-industrial product varieties. GB/T 16707.1-1996 General Rules for Filing of Product Varieties Part 1: Format of Product Variety File Card GB/T16707.1-1996 Standard Download Decompression Password: www.bzxz.net
This standard specifies the format, content and filling regulations of the "product variety file card" (hereinafter referred to as "variety card" or "card") for filing a case for product varieties with production capacity. This standard is applicable to the filing of a case for finalized product varieties, and can be used as the basis for various management work of industrial enterprises and management departments at all levels on product varieties. It is also applicable to the filing management of other non-industrial product varieties.

GB/T16707.1-1996
This standard is compiled according to the needs of my country's national economic development and with reference to Tianjin local standard DB12T011-90 product variety file card format in the absence of international precedents. It is a comprehensive basic standard for building and improving product variety files, facilitating the networking of product variety information and its information resource sharing, and establishing a reliable basis for unified national economic accounting. GB/T16707 is under the general title "General Rules for Product Variety Registration", which includes the following independent parts: Part 1 (i.e. GB/T16707.1): General Rules for Product Variety Registration Part 1: Format of Product Variety Files Part 2 (i.e. GB/T16707.2): General Rules for Product Variety Registration Part 2: Format of Product Variety Code Card Part 3 (i.e. GB/T16707.3): General Rules for Product Variety Registration Part 3: General Rules for Product Variety Registration Management This standard (GB/T16707.1) mainly stipulates the concise, accurate and easy-to-understand format for recording nearly 50 historical information on product variety development and development used to establish product variety files. The format, content and filling regulations of the "product variety file card" that is easy to read and manage. Appendix A of this standard is a prompt appendix.
This standard is proposed and organized by the Technical Committee for Standardization of Document Format and Data Element. The drafting units of this standard are: Tianjin Electronic Instrument Quality Center Test Institute, China Standardization and Information Coding Institute, and Tianjin Archives Bureau.
The main drafters of this standard are: Wang Peishu, Fang Qing, Liu Jiafu, and Guo Qitong. 1 Scope
National Standard of the People's Republic of China
General rule for putting on record of pruduct variety
Part 1: Record card form of product variety
Genernl rule for putting on record of pruduct varietyFart 1: Record card form of product varietyGB/T 16707. 1...1996
The cloud standard specifies the format, content and filling regulations of the "product variety file card" (hereinafter referred to as "variety card" or "hereinafter") for filing of product varieties with production capacity.
This standard is applicable to the filing of finalized product varieties and can be used as the basis for industrial enterprises and management departments at all levels to manage product varieties. It is also applicable to the filing management of other non-industrial product varieties. 2 Referenced standards
The provisions contained in the following standards constitute the provisions of this standard before being cited in this standard. When this standard was published, the versions shown were All standards will be revised. All parties using this standard shall discuss the possibility of using the latest version of the following standards CB11889 Printing, writing and drawing size GB/7408--94 Data element exchange format information exchange method GB7635-87 National industrial and agricultural product (commodity, material) classification and code G1311714-1995 National organization code compilation principle GB/T15707.2-1996 Product variety filing general rules Part 2: Product variety code card format JB3750-84 Category classification
Z3 Y32 (2190H
3 Definition
The following definition is adopted
31 Product variety archive card Rerordrardofproductvuriety The basic situation of product variety development is filled in, and it is used as a card for archiving and querying. 3.2 Purtting on record
Building documents,
3.3 Main seilications
When a product has multiple specifications, the common main technical parameters are used as the basis for the design calculation of the product. The more general specifications are the basic rules.
3.4 ​​Life cycle
The time from the product entering the market to its retirement and discontinuation of production - this period includes four stages: introduction period, growth period, maturity period and decline period. 3.4.1 Introduction period
Refers to the initial stage of the product being put on the market.
Approved by the State Administration of Technical Supervision on December 20, 1996, and implemented on July 1, 1997
3.4.2 Growing period
GB/T 16707.11996bzxZ.net
Refers to the stage when the product is gradually widely recognized in the market, its production and sales volume increase rapidly, and its production technology and production capacity are significantly improved
3. 4. 3 Ripe period
Refers to the stage when the product has been widely recognized in the market, its egg production and sales volume have reached a relatively stable peak, and its production technology is more mature. 3. 4.4 Decline period The stage when the product is saturated in the market, its sales volume drops sharply, and it is discontinued by elimination. 4 Variety card format
4.1 The paper size of the variety card should comply with the 4 series 4 number (210mm×217mm) specified in the table of Article 4 of GB148-89. 4.2 The quality of the variety card shall comply with the provisions of Grade A paper (weight 250g/m2) in ZBY32024. 4.3 The contents of the variety card shall be distributed on both the front (Table 1) and back (Table 2), with the text on the front and back sides differing by 180 degrees. 4.4 The distribution and size of the main items on the front of the variety card shall comply with the provisions of Table 1. 4.5 The distribution and size of the main items on the back of the variety card shall comply with the provisions of Table 2. 4.6 The font of "Product Variety File" on the variety card is Long Fangmo with a height of 7mm; the fonts of other items are Long Fang Song with a height of 3.5mm.
5 Variety Card Contents
5.1 Product Category, Classification Code, Variety Code and Card Number (including main card number, secondary card number, and number code) 5.2 Variety Model, Name, Trademark and Barcode Including:
a) Variety Model, Name and Model Meaning;
b) Name of the series to which this variety belongs;
c) Product Trademark:
d) Barcode.
5.3 Product Implementation Standards
Including:
) Current Standard Number, Standard Name and Level!h) Adopted National International, foreign standards description (including the number, name and degree of adoption of the standard - equivalent, equivalent, non-equivalent, other; c) standard adoption certificate, acceptance time. 5.4 Product appearance and structural characteristics, main technical parameters include: a) Product appearance and structural characteristics: b) Main technical parameters: ) Main purpose 5.5 Product file number and enterprise code 5.6 Bid and unchanged price (the above is the front of the card, the following is the reverse side) 5.7 Product development history includes: a) Source, task number, GR/T 16707.1: 1996
b) Product design leader, participating R&D units and R&D personnel and design nature (self-design, unified design, transplantation, scientific research results, introduction) and data sources:
) Sample trial production time, identification time and conclusion: batch trial production time, identification time and conclusion; d) Production time, production characteristics (large batch, small batch, zero-time, rotation, one-time); c) Life cycle (introduction period, growth period, maturity period, decline period) and production cessation time. 5.8 Patent number
5.9 Domestic Foreign analog product model and home
5-10 Quality grade (superior product, first-class product, qualified product) and certification number; system certification (level, standard and certification section) 5.11 Export (time, country, origin)
5.12 Fill in the card, standardization review and city personnel sign 5.13 Remarks
6 Variety card filling regulations
6.1.1 This card is filled in with varieties as the target,
6.12 This card is divided into main card and auxiliary card. The format of main card and auxiliary card is consistent, and they should comply with Table 1 and Table 2. The difference is the content filled in and the card identification.
6.1.3 Each main card represents a variety. All the contents of the main card should be filled in in detail. When a product contains multiple specifications, its basic specifications should be filled in in detail, and the remaining specifications should be filled in the auxiliary card. 6.1.4 In principle, each sub-card only represents one specification. Sub-cards are only applicable to: · Products with multiple specifications for a variety. If a variety has only one specification, do not fill in the sub-card. The sub-card only fills in the differences between this specification and the main specification (basic specification). The differences should not be filled in. The sub-card is subordinate to the main specification. 6.1.5 Before filling in the card, the product system and industry standard must be clearly divided and identified according to the relevant standards and regulations of my country. If there is no such standard, refer to the Appendix A (suggested Appendix) of GB/T 16707.2--1996 and the special unit for research and determination. 6. 1.6 The filling of the time shall comply with the provisions of Article 5.2.1.1 of GB/T 7408--94, and the format shall comply with Article 5.3.1.2. 6.2 Filling in the product category, classification code, variety code and long number 6.2.1 The determination of the product category and classification code shall comply with the provisions of (GB17635 and its extended national standards. The national standard for the extended agent of CB7635 is shown in Appendix A (suggested appendix). The preparation of the product code shall comply with GB/I16707.2.6.2.2 Main card number: Arrange in reverse order from 001, and each main card has one number. 6-2.3 Sub-card number: Each sub-card shall be filled in with the card number, and the card number is divided into sections. The first section is the card number of the variety to which this specification belongs, and the second section is the card number of different specifications in the same variety. The sequence number (starting from 02) is called the secondary card number for short. The two sections are connected by \\ numbers. The secondary card number indicates the number of specifications of the product: For example, a product variety (whose main card number is "04\) has two specifications. The second specification should be filled in the secondary card, and its secondary card number is \004-02\
6.2.4 Numbering and total number: The enterprise fills in "number", and the variety length (including main length and secondary length) within the same enterprise is 0001. \Number\ value is equal to the number of sheets on the order. "Total number" is used as the title. 6.3 Variety model, name, trademark and bar code are filled in 6. 3.1 Model, name, fill in the product number and name specified in the product standard. 6.3.2 Series name: (refers to the series formed by standardization work) Fill in the series name to which this product belongs. This is blank for products without series.
6.3.3 Model meaning: Fill in the meaning of each component of the product model: the following is an example:
GB/T16707.1-1996
Machine frame number (center height)
Micro-phase asynchronous motor
6.3.4 Product trademark: Fill in the product trademark graphic symbol approved by the trademark authority. Or paste a photo of the trademark. 6.3.5 Barcode: Paste the barcode of this product issued by the China Article Coding Center. 6.4 Fill in the product implementation standard
6.4.1 Current standard number: The number of the standard implemented by the product: 6.4.2 Standard name: Fill in the standard implemented by the product 6.4.3 Standard level: Fill in the level of the standard certified by the superior competent department (such as: international advanced: international general domestic advanced: domestic general).
6.4.4 Instructions for the use of international standards Fill in the number and name of the international standard or foreign advanced standard adopted, and write the serial number representing the degree of adoption after it (if equivalent adoption, it is "②\"). 6.4.5 Certificate number, acceptance time, fill in the certificate number and acceptance time issued after the acceptance of international standards at all levels. 6.5 Product appearance and structural characteristics, technical parameters and uses 6.5.1 Product appearance and structural characteristics: Fill in the characteristics representing its appearance (or form) and structure. 6.5.1.1 Mechanical and electrical hardware products, textiles and other colored products should be attached with their small appearance drawings or product samples (or photos), and indicate their appearance dimensions. Products that need to be installed or connected with other accessories should indicate their installation and interface dimensions. 6.5.1.2 For intangible products, its state, color, composition and other characteristics should be described. 6.5.2 Main technical parameters: Fill in the name and value of its main technical parameters. 6.6 Enterprise code
Fill in the enterprise code compiled in accordance with G1311714. 6.7 Fill in product development history
6.7.1 Task source, circle it if it belongs to the level (e.g., if it is at the department level, it is the department) 6.7.2 Level-added research and development units and research and development personnel: Fill in the name of the unit that mainly participated in the research and development and the gender, age and position of its main research and development personnel. 6.7.3 Design nature, production quality: Same as 6.7.1 Classification network. 6.7.4 Sample trial production time, batch trial production time: Fill in the start and end time of sample trial production and batch trial production. 6.7.5 Life cycle: Fill in the start time of this cycle in the blank after the cycle: 6.8 Fill in the patent number
Fill in the patent number of this product approved and issued by the patent authority. 6.9 Filling in the model and manufacturer of analogous products
6.9.1 Domestic: Fill in the domestic manufacturers of network products that mainly occupy the front market and have high quality, as well as their product models and names. 6.9.2 Equivalent foreign: Fill in the country, company name, product model and name of the manufacturer of similar foreign products. 6.9.3 World famous brand: Fill in the country, company name, product model and name of the manufacturer of similar world famous brand products.6.10 Filling in quantity
6.10.1 Quality grade
6.10.1.1 Grade: Fill in the time when this product obtained the superior product (first-class product, qualified product). 6.10.1.2 Certification number: Fill in the certification number of the corresponding superior product (first-class product, qualified) quality certification. 6.10.2 System certification
6.10.2.1 Level: Fill in the level of quality assurance system certification (such as country, country, etc.). 6.10.2.2 Standard: Fill in the standard number of the quality assurance system certification or the relevant regulations (such as IS9000 or the GMP certification regulations of the country, etc.).
GB/T 16707-1-:1996
6.10.2,3 Certification number: Fill in the certification number issued by the quality assurance system certification unit 6.11 Fill in the export situation 1
6.11.1 Time: Fill in the time when the product was exported. 6.11.2 Country: Fill in the name of the main country (or region) to which the product is exported. 6.11.3 Quantity: Fill in the number of exported products. 6.12 Signature
6.12.1 Fill in the name, position and time of the person filling in the card. 6.12.2 Standard review: Fill in the name, position and time of the person responsible for standardization review. 6.12.3 Approval: Fill in the name, position and time of the person responsible for approval. 6-13 Note: For backup.
CB/T 16707. 1-1996
Product Business Bridge
Model Jinyi
GB/T16707.1.1996
Product Development History
GB/T16707.1—1996
Appendix A
(Suggested Appendix)
References
The following items are national standards to be extended from GB7635:A1 Ferrous metal pressure processing products (commodities, materials) classification codeA2 Ferrous metal smelting products (commodities, materials) classification code43 Non-ferrous metal rolling products (commodities, materials) classification codeA4
Non-ferrous metal smelting products (commodities, materials) classification code5 Medical device products (commodities, materials) classification codeA5
A6 Chemical raw material medicine products (commodities, materials) classification codeA7 Chemical agent products (commodities, materials) classification code8 Boiler and power machinery products (commodities, materials) classification codeA8||tt| |A9 Jinping processing machine plate products (commodities, materials) classification code A10 General equipment and general parts products (commodities, materials) classification code A11 Construction machinery and drilling machinery products (commodities, materials) classification code A12 Agricultural, forestry, animal husbandry, and fishery machinery products (commodities, materials) classification code A13 Electrical equipment and equipment products (commodities, materials) classification code A14 Instruments, measuring standards and measuring tools (commodities, materials) classification code A15 Industrial special equipment products (commodities, materials) classification code A16 Non-industrial special equipment and other machinery products (commodities, materials) classification code A17 Chinese medicinal materials products (commodities, materials) classification code A18 Chinese patent medicine products (commodities, materials) classification code 9 Inorganic chemical products (commodities, materials) ) Classification code A19
Organic chemical products (commodities, materials) Classification code A20
Coatings, dyes and additives products (commodities, materials) Classification code Polymer products (commodities, materials) Classification code Additives, auxiliaries and catalysts products (commodities, materials) Classification code Information chemical products (commodities, materials) Classification code Agricultural chemicals and other wood-based chemical products (commodities, materials) Classification code Chemical reagent products (commodities, materials) Classification code Rubber products (commodities, materials) Classification code Building materials and other non-metallic mineral products (commodities, materials) Classification code Processed food, beverages, tobacco processed products and feed products (commodities, materials) Classification code Leather, fur and its products (commodities, materials) Classification Code part Pulp, paper and paper products, printed products, cultural, educational and sports products (commodities, materials) classification code Daily chemical products (commodities, materials) classification code Wood, bamboo, rattan, palm, leather products Furniture <Commodities, materials classification code A34
Textile products (commodities, materials) classification code A35
Textile fiber processed products, knitwear (commodities, materials) classification code A36 Clothing, shoes and other sewing products (commodities, materials) classification code A37
Forestry products, artificially raised animals and hunted wild animals and bamboo and wood felling products (commodities, materials) classification code 3 Aquatic products (commodities, materials) classification code A38
Agricultural products (commodities. Materials) classification code
GB/T 16707. 1-1996
Transportation equipment products (commodities, materials) classification code
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.