Universal technical requirements of anti-counterfeiting technical products
Introduction to standards:
This standard specifies the general technical requirements for various anti-counterfeiting technology products, as well as the terms and definitions related to them, product classification, requirements, test, verification and evaluation methods, acceptance rules, marking, packaging, transportation and storage. This standard applies to various anti-counterfeiting technology products (including supporting reading systems), including anti-counterfeiting labels, structural and (or) packaging anti-counterfeiting technology products, anti-counterfeiting materials, computer? Multimedia digital information anti-counterfeiting technology products, biometric identification anti-counterfeiting technology products, etc. This standard is also used to guide the preparation of standards for various anti-counterfeiting technology products. GB/T 19425-2003 General Technical Conditions for Anti-Counterfeiting Technology Products GB/T19425-2003 Standard Download Decompression Password: www.bzxz.net
This standard specifies the general technical requirements for various anti-counterfeiting technology products, as well as the terms and definitions related to them, product classification, requirements, test, verification and evaluation methods, acceptance rules, marking, packaging, transportation and storage. This standard is applicable to all kinds of anti-counterfeiting technology products (including supporting identification and reading systems), including anti-counterfeiting labels, structural and (or) packaging anti-counterfeiting technology products, anti-counterfeiting materials, computer? multimedia digital information anti-counterfeiting technology products, biometric identification anti-counterfeiting technology products, etc. This standard is also applicable to guide the compilation of standards for various anti-counterfeiting technology products.
Some standard content:
ICS13.310
National Standard of the People's Republic of China
GB/T19425—2003
Universal technical reguirenents of anti-counterfeitingtechnical products
2003-12-19 Issued
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
2004-02-01 Implementation
GB/T19425—2003
This standard was proposed by the China Anti-Counterfeiting Industry Association. Foreword
This standard was approved by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China. This standard is under the jurisdiction of the National Anti-Counterfeiting Standardization Technical Committee. iKNrKAca=
The drafting units of this standard are: Beijing Dongfang Huike Anti-counterfeiting Technology Co., Ltd., Beijing Tsinghua Touchstone New Technology Co., Ltd., Shandong Zibo Taibao Anti-counterfeiting Technology Products Co., Ltd., Wuhan Huagong Science and Technology Industry Co., Ltd. Image Branch, Jiangsu Nanda Digital Technology Co., Ltd., Chengdu Banknote Printing Co., Ltd.
The drafters of this standard are: Xu Jihua, Tong Xianhai, Ha Liuzhu, Liu Zhengqing, Chen Rugou, Zhang Teng, Tian Deqing, Zhang Fajin, Du Lihua, Li Yongshan. This standard is published for the first time.
1 Scope
General technical conditions for anti-counterfeiting technology products
GB/T19425---2003
This standard specifies the general technical requirements for various anti-counterfeiting technology products, as well as their related terms and definitions, product classification, requirements, test, verification and evaluation methods, acceptance regulations, marking, packaging, transportation and storage. This standard applies to all kinds of anti-counterfeiting technology products (including supporting reading systems), including anti-counterfeiting labels, structural and (or) packaging anti-counterfeiting technology products, counterfeit materials, computer-multimedia digital information anti-counterfeiting technology products, biometric identification anti-counterfeiting technology products, etc. This standard is also applicable to guiding the preparation of standards for various anti-counterfeiting technology products. 2 Normative reference documents
The clauses in the following documents become the clauses of this standard through reference in this standard. For all dated referenced documents, all subsequent amendments (excluding errata) or revisions are not applicable to this standard. However, the parties who reach an agreement based on this standard are encouraged to study whether the latest versions of these documents can be used. For all undated referenced documents, the latest versions shall apply to this standard. GB/T2828.1 Procedure for sampling inspection by attributes Part 1: Sampling plan for batch inspection based on the acceptance quality limit (AQL) GB/T 2829 Procedure and table for sampling by attributes for periodic inspection (applicable to inspection of process stability) GB/T17003-1997 General technical conditions for anti-counterfeiting holographic products GB/T17001.1-1997 Anti-counterfeiting inks Part 1: Technical conditions for ultraviolet excited fluorescent inks (offset and letterpress printing) GB/T17003.1-1997 Security anti-counterfeiting paper Part 1: Paper for securities certificates GB/T17004-1997 Terminology of anti-counterfeiting technology
GB/T 17121--1997
GB3/T 18733-2002
GB/T 18734-2002
GB/T 18751--2002
Anti-counterfeiting printing ink Part 1: Technical conditions for UV-excited fluorescent anti-counterfeiting penetrating printing ink Anti-counterfeiting holographic paper
Anti-counterfeiting holographic hot stamping box
Magnetic anti-counterfeiting ink
GB/T 18752-2002
Thermosensitive color-changing anti-counterfeiting ink
GB/T 18753-2002
2H light-excited color-changing anti-counterfeiting ink
GB/T 18754-2002
Printing UV-excited fluorescent anti-counterfeiting oil
GB/T 18758—20021
General technical conditions for anti-counterfeiting nuclear technology products
3 Terms and definitions
The following terms and definitions apply to this standard: 3.1bzxz.net
Anti-counterfeiting technical productAnti-counterfeiting technical productAnti-counterfeiting product with anti-counterfeiting as its main purpose, manufactured using anti-counterfeiting technology, and having anti-counterfeiting function. 3.2
Anti-counterfeiting labelAnti-counterfeiting label that can be pasted, printed or transferred to the surface of the target object, the packaging of the target object or the accompanying objects, and has anti-counterfeiting function. 3.3
Structure and (or) packaging anti-counterfeiting technical productAnti-counterfeiting technical product of structure and packageAnti-counterfeiting technical product that uses structure and (or) packaging to achieve anti-counterfeiting purpose. GB/T 19425—2003
Anti-counterfeiting materialAnti-counterfeiting materialMaterial with anti-counterfeiting function.
Computer science based multichannel anti-counterfeiting product
YKAONTKAca-
computer science based multichannel anti-counterfeiting product that uses computer-multimedia digital information system to achieve authenticity identification. 3.6
Biologic feature identification anti-counterfeiting product
Products that use biological (including human) features for authenticity identification. 3.7
Uniqueness of identity refers to the uniqueness and non-transferability of the anti-counterfeiting identification features of anti-counterfeiting technology products. 3.8
Guarantee
The shortest time that the anti-counterfeiting identification features of anti-counterfeiting technology products can be maintained under normal use conditions. 3.9
Time of safety
The shortest time that the anti-counterfeiting identification features of anti-counterfeiting technology products can be successfully imitated under normal use conditions. 3.10
Adaptability of application The ability of the anti-counterfeiting identification features of anti-counterfeiting technology products to adapt to the use requirements of the subject matter or service object. 4 Classification
4.1 Anti-counterfeiting labels (may include supporting reading systems) 4.1.1 Holographic anti-counterfeiting labels
Anti-counterfeiting labels made using holographic technology. Generally include: a) molded holographic anti-counterfeiting labels,
b) volumetric reflective holographic anti-counterfeiting labels.
4.1.2 Optical film anti-counterfeiting labels
Anti-counterfeiting labels made using multi-layer optical anti-reflection film systems. 4.1.3 Dual-card anti-counterfeiting mark
Anti-counterfeiting mark that uses a decoding card and a hidden text card to read hidden line image and text information generally includes: a) Moiré fringe dual-card anti-counterfeiting mark: h) Nuclear track dual-card anti-counterfeiting mark; c) Polarized light dual-card anti-counterfeiting mark.
4.1.4: Integrated photographic anti-counterfeiting mark
An anti-counterfeiting mark composed of a cylindrical lens and an integrated photographic coding map. 4.1.5 Graphic output laser anti-counterfeiting mark
An anti-counterfeiting mark formed on the surface of the target by a laser beam. 4.1.6 Single ion microporous anti-counterfeiting mark
An anti-counterfeiting mark that uses heavy ion irradiation to form a microporous image and text through etching. 4.1.7 Instant anti-counterfeiting mark
An anti-counterfeiting mark made of anti-counterfeiting printing technology and (or) anti-counterfeiting printing materials. 4.1.B Invisible Graphic Reflective Anti-Counterfeiting Mark
Anti-Counterfeiting Mark Using Paste or Material with Reflective Characteristics 4.1.9 Yin-Yang Graphic Revealing Anti-Counterfeiting Mark
Anti-Counterfeiting Mark with Complementary Yin-Yang Graphics on the Top Layer and Second Layer. 4.1.10 Magnetic Code Anti-Counterfeiting Mark
Anti-Counterfeiting Mark Printed Using Magnetic Ink. 4.1.11 Covering Layer Anti-Counterfeiting Mark
GB/T19425—2003
Anti-Counterfeiting Mark Using Covering Layer Covered with Unique Corresponding Digital or Graphic Information. This Mark is Scrape-Off and Revealed. 2 Mark Distribution Characteristics Anti-Counterfeiting Mark
Anti-Counterfeiting Mark Made Using Identifiable Marks and Their Distribution Characteristics. 4.1.13 Other Anti-Counterfeiting Marks
4.2 Structural and (or) Packaging Anti-Counterfeiting Technology Products Anti-Counterfeiting technology products that use structure and (or) packaging to achieve anti-counterfeiting purposes. 4.3 Anti-counterfeiting materials
4.3.1 Anti-counterfeiting paper
Paper with anti-counterfeiting function, generally including: a) Fiber paper
Paper with obvious visible fibers or fluorescent fibers in the paper. b) Watermark paper
Paper that can display images and texts under visible light transmission by using different thickness of pulp in different parts of the paper. )
Nuclear watermark paper
Watermark paper formed by nuclear tracks showing images and texts on paper as the base material Security thread paper
Paper with small discs, micro particles, fibers, ribbons, holograms, and security threads in the paper. e) Peelable fragile paper
Paper that will break after peeling after the attached object. f) Erasable (scrape) correction paper
Paper used to prevent the information on the paper from being erased (scratched). R
Anti-copy paper
Paper whose information cannot be copied or damaged by copying means h)
Anti-alteration carbon paper
Paper with positive text on the front and negative text on the back after writing or printing. i)
Anti-counterfeiting holographic paper
Holographic products with paper as the base material, divided into transfer type and non-transfer type. j) Other anti-counterfeiting papers
4.3.2 Anti-counterfeiting film
) Anti-counterfeiting holographic film
Holographic products with plastic film as the base material and anti-counterfeiting function, its types generally include: Aluminum-plated anti-counterfeiting holographic film: Lead-plated plastic film with anti-counterfeiting holographic information layer. Transparent anti-counterfeiting gold holographic film: Transparent plastic film with anti-counterfeiting holographic layer. : 1. Anti-counterfeiting holographic hot stamping film: GB/T 19425-2003 anti-counterfeiting holographic film with plastic as the base material, which can transfer anti-counterfeiting holographic information to paper or other objects by hot stamping.
b) Heavy ion microporous film
) Other anti-counterfeiting films
4.3.3 Anti-counterfeiting inks
Inks with anti-counterfeiting properties generally include: a) Gravure anti-counterfeiting inks:
Engraved gravure ink type;
Gravure metal inks.
Optical anti-counterfeiting inks.
Photosensitive anti-counterfeiting inks;
Ultraviolet excited fluorescent anti-counterfeiting inks:
--- Daylight excited color-changing anti-counterfeiting inks;
-- Infrared anti-counterfeiting inks.
d) Electroluminescent inks.
Thermosensitive anti-counterfeiting inks.
f) Pressure-sensitive anti-counterfeiting ink,
Water-sensitive anti-counterfeiting ink.
Magnetic anti-counterfeiting ink.
Nuclear element anti-counterfeiting ink.
Anti-alteration anti-counterfeiting ink
k) Other anti-counterfeiting inks.
Anti-counterfeiting printing ink
The printing ink with anti-counterfeiting function generally includes: a) UV-excited fluorescent anti-counterfeiting penetrating printing ink; b) Other anti-counterfeiting printing ink.
4.3.5 Other anti-counterfeiting materials
4.4 Computer multimedia digital information anti-counterfeiting technology products 4.4.1 Digital information verification anti-counterfeiting system
4.4.2 Anti-counterfeiting integrated circuit (IC) card and reading system 4.4.3 Anti-counterfeiting technology products with intelligent key suppression points and reading system 4.4.4 Watermark magnetic card and reading system
4.4.5 Anti-counterfeiting bar code and reading system
4.4.6 Anti-counterfeiting optical card and reading system
4.4,7 Other computer multimedia digital information anti-counterfeiting technology products 4.5 Biometric identification anti-counterfeiting technology products
4.5.1 Human feature identification anti-counterfeiting technology products
KANrKAca-
Anti-counterfeiting technology products that use human features (such as fingerprints, palm prints, irises, voiceprints, facial features, infrared thermal images, etc.) to identify authenticity. 4.5.2 Anti-counterfeiting technology products using biological deoxyribonucleic acid (DNA) for authenticity identification. Anti-counterfeiting technology products that use biological deoxyribonucleic acid (DNA) for authenticity identification. 4.5.3 Other biological feature identification anti-counterfeiting technology products 4.6 Other anti-counterfeiting technology products
5 Requirements
5.1 Anti-counterfeiting strength
GB/T19425—2003
The anti-counterfeiting strength of anti-counterfeiting technology products should be no less than 60. The anti-counterfeiting strength is composed of four factors: the number of anti-counterfeiting identification features, the number of anti-counterfeiting technology exclusivity, the difficulty of manufacture and the cost of imitation. The requirements and anti-counterfeiting strength of each factor should comply with the provisions of Table 1. 1. Anti-counterfeiting strength evaluation table
Composition factors
Number of unique anti-counterfeiting technology
Number of anti-counterfeiting identification features
Difficulty of imitation
Size of imitation cost
4 types and
5 types and
3~4 types
Comprehensive judgment of anti-counterfeiting strength is calculated according to items 1~4 in Table 1, and is divided into: Grade A 97~100,
90~96;
Grade C 73~89;
Grade D 60~74.
5. 2 Identity uniqueness
Anti-counterfeiting technology products should have identity uniqueness not lower than grade 1). The inspection items and classification indicators of identity uniqueness are shown in Table 2. In Table 2, the higher the grading index, the better the identity uniqueness. Table 2 Identity uniqueness requirements for anti-counterfeiting technology products Serial number
Product category
With covering layer
Anti-counterfeiting mark
Without covering layer
Bottle and () packaging
Anti-counterfeiting technology products
Anti-counterfeiting materials
Computer-multimedia
Mathematical information anti-counterfeiting technology products
Biometric identification anti-
Injury technology products||t t||Inspection items
Ratio of incomplete information after the covering layer is scratched or peeled off
Ratio of non-transferability
and ratio of immediate destruction after opening/%
Number of using enterprises/unit
Information only?
Feature recognition effectiveness
Grading measures
20--25
15~-19
GB/T 19425-2003
5.3 Periodic
Anti-counterfeiting technology The anti-counterfeiting identification features of products should have a stability period of not less than the import grade. The specific requirements are shown in Table 3. Table 3 Stability period of anti-counterfeiting technology products
Product category
Anti-counterfeiting mark
Structure and (or) packaging anti-counterfeiting technology products
Anti-counterfeiting paper
Anti-counterfeiting material
Anti-counterfeiting film
Anti-counterfeiting ink and printing oil
Computer--multimedia
Digital information anti-counterfeiting technology products
Biometric identification anti-counterfeiting technology products
Identification performance
-rKAONiKAca-
Stability period requirements (months, not less than)
Anti-counterfeiting technology products should have identification performance not lower than Grade D. The specific requirements are shown in Table 4. Table 4 Identification performance requirements for anti-counterfeiting technology products No.
Authentic product passing rate/%
Fake product leakage rate/%
Authenticity uncertainty rate/%
Identification time/
Identification performance is determined by taking the lower level item from the 4 items in Table 4 5.5
Usage adaptability
Identification performance requirements
Specified in product standards
The use adaptability of anti-counterfeiting technology products should be able to meet the requirements of products or objects. Specific requirements are specified in the anti-counterfeiting technology product standards.
5. 6 Usage environment requirements
The anti-counterfeiting performance of anti-counterfeiting technology products should be able to meet the normal use environment requirements of the object, and the specific requirements are specified in the anti-counterfeiting technology product standards.
Technical security and confidentiality
Anti-counterfeiting technology products should have technical security and confidentiality, and its specific requirements are specified in the anti-counterfeiting technology product standards. 5.8 Safety period
Manufacturers should provide users with the safety period of anti-counterfeiting technology products. Specific requirements for the safety period are shown in Table 5. Table 5 Product safety period promised by manufacturers (months, not less than) Grade A
6 Test, verification and assessment methods
6.1 Inspection method for anti-counterfeiting strength
The anti-counterfeiting strength (see 5.1) is determined by the sum of the anti-counterfeiting strength obtained from the inspection of items 1 to 4 in Table 1. 6.1.1 The number of anti-counterfeiting identification features shall be verified item by item according to the actual number of anti-counterfeiting identification features of the anti-counterfeiting technology product. 6.1.2 The number of anti-counterfeiting technology exclusivity is determined by verifying the valid certification materials provided by the enterprise. GB/T 19425—2003
6.1.3 Difficulty of copying anti-counterfeiting technology The anti-counterfeiting technology is evaluated by no less than three registered anti-counterfeiting experts in four aspects: the number of disciplines involved in the anti-counterfeiting technology, the advanced level of technical equipment and means required for copying, the impact of the principle leakage on reducing the copying system, and the difficulty of copying. 6.1.4 The cost of copying is evaluated by experts based on the cost of copying equipment and site, labor and material costs provided by the enterprise. 6.2 Method of checking uniqueness of identity
6.2.1 The non-transfer rate and (or) information incomplete rate of the anti-counterfeiting label shall be checked manually and shall comply with the provisions of Table 2. 6.2.2 When the identity uniqueness of the structure and packaging anti-counterfeiting technology products is checked manually, when the structure or packaging is opened normally, the rate of destruction of its anti-counterfeiting function shall comply with the provisions of Table 2. 6.2.3 The identity uniqueness of the anti-counterfeiting material shall be checked with the valid certificate provided by the manufacturer (the number of users using this anti-counterfeiting material with such characteristics shall be stated) and shall comply with the provisions of Table 2.
6. 2.4 The identity uniqueness of the computer-multimedia digital information anti-counterfeiting technology product shall be checked through the uniqueness of the product individual information. The specific method shall be in accordance with the provisions of the anti-counterfeiting technology product label. 6.2.5 The identity uniqueness of the biometric identification anti-counterfeiting technology product shall be checked through the biological (including human) feature identification of the object being inspected and shall comply with the provisions of Table 2.
6.3 Inspection method for stability period
The stability period of anti-counterfeiting identification features (see 5.3) is inspected according to the method specified in the anti-counterfeiting technology product standard. 6.4 Inspection method for identification performance
The identification performance (see 5.4) is inspected by the relevant identification instrument (machine-readable) or manual (non-machine-readable) method according to the instructions provided by the manufacturer and the requirements of Table 4. During the experiment, the sample size and identification time of the inspected product are determined by the anti-counterfeiting technology product standard. 6.5 Inspection method for use adaptability
The use adaptability of anti-counterfeiting technology products (see 5.5) is inspected according to the provisions of the anti-counterfeiting technology product standard. 6.6 Inspection method for use environment requirements
The use environment requirements of anti-counterfeiting technology products (see 5.6) are inspected according to the use environment test method specified by the subject matter. The specific requirements are specified in the anti-counterfeiting technology product standard.
6.7 Inspection method for technical security and confidentiality
The technical security and confidentiality (see 5.7) are inspected by the verification method. Those who meet all the requirements are qualified. 6.8 Inspection method of safety period
The safety period (see 5.8) is checked by information feedback. If the manufacturer has no user complaints during the safety period, this requirement is qualified. If there are user complaints and they are verified, it is unqualified. 7 Acceptance rules
7.1 Test types
In order to check whether the quality of anti-counterfeiting technology products meets the requirements of this standard, the anti-counterfeiting technology products should be subjected to acceptance tests (factory tests), routine tests and finalization tests (type tests). 7.2 Acceptance test
7.2.1 Test objects, sampling locations and methods. The inspection batch acceptance test is a kind of inspection for the processing defects of the product. Each batch of anti-counterfeiting technology products produced by the manufacturer shall be randomly sampled from the production line or finished product warehouse for inspection according to the requirements of this standard. Products of the same specification submitted for acceptance at the same time are considered as a batch. GB/T 19425—2003
7.2.2 Test items
HiKAoNrKAca-
The test items for the acceptance test of anti-counterfeiting technology products are identity uniqueness inspection (see 6.2), recognition performance inspection (see 6.4), use adaptability inspection (see 6.5), and appearance, specifications, mechanical properties, physical properties, chemical properties, system safety and other quality indicators specified in the corresponding anti-counterfeiting technology product standards or sub-standards, as well as packaging and transportation conditions inspection. The specific methods should be specified in the corresponding anti-counterfeiting technology product standards or sub-standards.
7.2.3 Sampling plan
The sampling plan for the acceptance test of anti-counterfeiting technology products should adopt the GB/T2828.1 general inspection level door normal inspection one-time sampling plan. The qualified quality level (AQL) of the acceptance test of anti-counterfeiting technology products should take different values according to the nature of the defects of the inspected items. For inspected items that may cause serious defects, the AQL is 1.5 (excluding 4.1 Computers: Multimedia Digital Information Anti-Counterfeiting Technology Products of this Standard), and for inspected items with minor defects, the AQL value is 6.5. The AQL value of the acceptance test items (6.2, 6.4 and 6.5) listed in this standard is 1.5. The sample size and judgment array of the acceptance test are specified in the anti-counterfeiting technology product standard. 7.3 Routine test
7.3.1 Test object, sampling location and method Routine test is an inspection for product design defects and technical safety and confidentiality. The test samples for checking design defects in routine tests should be randomly selected from products that have passed the acceptance test. 7.3.2 Test items
The test items for routine tests are anti-counterfeiting strength inspection (see 6.1), anti-counterfeiting performance stability inspection (see 6.3), use environment requirements inspection (see 6.6), technical safety and confidentiality inspection (see 6.7), safety period inspection (see 6.8) and mechanical, physical and chemical performance inspections that may affect product performance due to changes in product design, manufacturing process or raw materials in the corresponding anti-counterfeiting technology product standards. 7.3.3 Sampling plan
In routine tests, the sampling plan for design defect test items should adopt the single sampling plan of discrimination level I in GB/T2829, and the unqualified quality level (RQI.) should take different values according to the defect nature of the inspected items. For inspected items that may cause fatal defects or cause great economic losses to the society, full inspection should be carried out or the RQL value should be taken as 1.0. For inspection items that may cause serious defects, the RQL value is 20. For inspection items that may cause minor defects, the RQL value is 40. The sample size and judgment array of routine tests are specified in the anti-counterfeiting technology product standards. The size of the anti-counterfeiting strength inspection (see 6.1), the stability period inspection of anti-counterfeiting performance (see 6.3) and the use environment performance inspection (see 6.G) as routine tests in the standard are all 20. The technical safety and confidentiality inspection (see 6.7) must be inspected and passed item by item according to all the requirements of technical safety and confidentiality. There should be no effective complaints during the guarantee period. The routine test is qualified only when the daily average of anti-counterfeiting strength, use environment performance, stability period of anti-counterfeiting performance, technical safety and confidentiality, safety period and other routine test items specified in the anti-counterfeiting technology product standards are qualified.
7.3.4 Test cycle
Routine tests should be carried out every six months. Routine tests should be carried out whenever the product structure, manufacturing process or main materials of the anti-counterfeiting technology product are changed, or when the product of this specification is discontinued for more than half a year and then resumed, and when there are major changes in technical safety and safety period. 7.3.5 Treatment of unqualified products and conditions for resuming production Products that fail routine tests should stop production and sales. Products that have been sold should be returned. At this time, the manufacturer should analyze the reasons for the product failure and propose solutions and measures. Production and acceptance can only be resumed after the new routine tests are qualified. 7.4 Finalization test (type test) Finalization test (type test) is an inspection conducted simultaneously for the design defects and processing defects of the product. Finalization test should be carried out whenever a new anti-counterfeiting technology product is trial-produced and put into production, or when the design, manufacturing process or main raw materials of the product are greatly changed. The test samples of the finalization test should be randomly bundled from the end of the production line or the finished product warehouse. When the test samples of the finalization test fully meet all the test requirements of the delivery test and routine test, the batch of samples is considered qualified. .5 Comprehensive evaluation of anti-injury technology products See Appendix A.
8 Labeling, packaging, transportation and extended storage
8.1 Product labeling
The following clear and firm labels shall be placed on the anti-counterfeiting technology products or their inner packaging: a) Product name:
The product name shall use the name specified in the anti-counterfeiting technology product standard. The product name shall indicate the true attributes of the product. GB/T 19425—2003
The product name shall use standard Chinese characters. If Chinese phonetic letters or foreign languages are required, the Chinese phonetic letters or foreign languages shall be smaller than Chinese characters. b) Name and address of the manufacturer. c) Production date. d) Safety period. 8.2 Packaging
8.2.1 The packaging of anti-counterfeiting technology products shall be able to ensure that the products are not damaged by accidents that may occur during transportation, storage and normal use. The form, size and material of the packaging can be determined according to the characteristics of the specific anti-counterfeiting technology products, and shall be specified in the anti-counterfeiting technology product standards. 8.2.2 The outer packaging of anti-counterfeiting technology products shall have the following clear and firm markings: a) Product name and model.
b) Name, address and telephone number of the manufacturer.
) Quantity of products.
d) Number of the anti-counterfeiting technology product standard that the product quality complies with. e) Net weight and gross weight,
f) Transportation mark.
) Dimensions of outer packaging
8.3 Certificate of Conformity
Each package shall be accompanied by a product certificate of conformity issued by the quality inspection department of the production enterprise. The certificate of conformity shall indicate the following: Product name and model.
b) Name and number of the standard that the product quality complies with. c) Production date.
d) Inspection date.
e) Safety period.
f) Signature and seal of the inspector.
8.4 Transportation
Anti-counterfeiting technology products should be able to be transported by normal means of transportation. During transportation, the requirements specified in 8.2.2f) shall be met. 8.5 Storage
Anti-counterfeiting technology products should be stored in ventilated, moisture-proof and fire-proof warehouses. The room temperature and relative humidity in the warehouse should meet the storage requirements of anti-counterfeiting technology products.
GB/T19425-2003
Appendix A
(Informative Appendix)
Method for determining the comprehensive quality grade of anti-counterfeiting technology products YKAoNTKAca-
Anti-counterfeiting technology products can be graded for comprehensive quality based on the five requirements of anti-counterfeiting strength (5.1), identity uniqueness (5.2), stability period (5.3), recognition performance (5.4) and safety period (5.8) on the basis that they meet the requirements of 5.1 to 5.8 of this standard. The comprehensive quality grade of anti-counterfeiting technology products should not be lower than Grade V. See Table A for details.
Table A, 1
Anti-counterfeiting strength
Identity
Stable period
Recognition performance
Safe period
Grading conditions for comprehensive quality grade of anti-counterfeiting technology products Single item grade score
Comprehensive quality grade score
Not less than
The comprehensive quality grade of anti-counterfeiting technology products is determined by the sum of the inspection results of the five individual items listed in 5.1, 5.4 and 5.8 of this standard and the scores specified in Table A.1.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.