GB/T 2779-1992 Types, dimensions and installation requirements for tractor trailers
Basic Information
Standard ID:
GB/T 2779-1992
Standard Name: Types, dimensions and installation requirements for tractor trailers
Chinese Name:
拖拉机拖挂装置型式尺寸和安装要求
Standard category:National Standard (GB)
state:in force
Date of Release1992-11-14
Date of Implementation:1993-07-15
standard classification number
Standard ICS number:Agriculture>>Agricultural machinery, tools and equipment>>65.060.10 Agricultural tractors and towing vehicles
Standard Classification Number:Vehicles>>Tractors>>T67 PTO, Traction Device
associated standards
alternative situation:GB 2779-1981
Procurement status:≈ISO 6489/1-80 ISO 6489/2-80
Publication information
publishing house:China Standards Press
Publication date:1993-07-15
other information
Release date:1981-09-29
Review date:2004-10-14
drafter:Quartz Dart
Drafting unit:Luoyang Tractor Research Institute of the Ministry of Machinery and Electronics
Focal point unit:National Technical Committee for Tractor Standardization
Proposing unit:Ministry of Machinery and Electronics Industry of the People's Republic of China
Publishing department:State Bureau of Technical Supervision
competent authority:China Machinery Industry Federation
Introduction to standards:
This standard specifies the type, size and installation requirements of tractor trailers. This standard applies to devices for agricultural wheeled tractors greater than 15kW connected to trailers. GB/T 2779-1992 Type, size and installation requirements of tractor trailers GB/T2779-1992 Standard download decompression password: www.bzxz.net
Some standard content:
CDC629. 114.2-013
National Standard of the People's Republic of China
GB/T 2779—92wwW.bzxz.Net
Tractor's connective equipment tor trailers--Types dimensions and mounting requirements
: Tractor's connective equipment tor trailers--Types dimensions and mounting requirementsPublished on 14 November 1992
State Administration of Technical Supervision
Implemented on 15 July 1993
National Standard of the People's Republic of China
Tractor's connective equipment tor trailers--Types dimensions and mounting requirementsTractork rnndecllve ryuipmenl For traifersTypes diruensiuts aatl nounliny Requirements This voucher is limited to international standard I0) 60/-1980 agricultural vehicle classification CB/T2779-92
generation G32779-81
Xin traction vehicle! The first part is about the size of the reverse connection: the first part is about the size of the reverse connection of the agricultural vehicle-the third part is about the size of the reverse connection of the agricultural vehicle-the fourth part is about the size of the reverse connection of the agricultural vehicle-the fifth part is about the size of the reverse connection of the agricultural vehicle-the sixth part is about the size of the reverse connection of the agricultural vehicle-the eighth ... 3.1 The trailer should be installed within the tractor's center of gravity. 3.2 The hook retainer can reliably prevent the trailer from falling off: 8 GB/T2779--S2 505mm height and 50b height. The center of the power transmission shaft should meet the requirements of Figure 3.3. The trailer pin should be able to be fixed after the hook is unhooked, that is, the hook is unhooked and the ground is 6c: 100m. Note: This standard is proposed by the People's Republic of China Machinery Industry and is a national standard for standardization of machinery and electronics. This standard is implemented by the Ministry of Industry and Information Technology of China. The main sources of technical specifications are:
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.