GB/T 4169.6-1984 Spacers for plastic injection mould parts
Basic Information
Standard ID:
GB/T 4169.6-1984
Standard Name: Spacers for plastic injection mould parts
Chinese Name:
塑料注射模具零件 垫块
Standard category:National Standard (GB)
state:Abolished
Date of Release1984-02-27
Date of Implementation:1985-01-01
Date of Expiration:2007-04-01
standard classification number
Standard ICS number:Mechanical Manufacturing>>Chipless Processing Equipment>>25.120.30 Molding Equipment and Casting Equipment
Standard Classification Number:Machinery>>Process Equipment>>J46 Mold
Publication information
publishing house:China Standards Press
other information
Review date:2004-10-14
Drafting unit:Guilin Electric Appliance Institute
Focal point unit:National Technical Committee for Mould Standardization
Publishing department:National Standardization Administration
competent authority:National Standardization Administration
Introduction to standards:
GB/T 4169.6-1984 Plastic injection mold parts spacer GB/T4169.6-1984 standard download decompression password: www.bzxz.net
Some standard content:
Marking example:
National Standard of the People's Republic of China
Plastic injection mold parts
Components of iajectioa mould for plastlcs-S pacer blocks
B=20, L=100, H=40:
Pad 20 × 100 × 40 GB 4169.6—84L
National Bureau of Standards 19 84-02-27 issued 400
UDC 621.726.29
GB 4189.684
The rest 4wwW.bzxz.Net
1985-01-01 implemented
GB 4160.884
Material: A3 steel GB700—79 "Technical Conditions for Ordinary Carbon Structural Steel". Technical conditions:
The geometric tolerance values marked in the figure shall be in accordance with Appendix 1 of GB1184-80, 1 is level 5. ,
Others shall be in accordance with GB4170-84.
Additional notes:
This standard is proposed by the Ministry of Machinery Industry of the People's Republic of China and is under the jurisdiction of the Guilin Electric Science Research Institute of the Ministry of Machinery Industry. mm
This standard was drafted by the Guilin Electric Science Research Institute of the Ministry of Machinery Industry, the Shanghai Plastic Products Mould Factory of the Ministry of Light Industry, the Chongqing Radio Factory of the Ministry of Electronics Industry, the Shanghai Spark Mould General Factory of Shanghai, the Beijing Qingyun Instrument Factory of the Ministry of Aviation Industry, and the Taiyuan Weidong Chemical Factory of the Ministry of Ordnance Industry. The main drafters of this standard are Zhang Ansheng, Zhao Yunjie, Yang Bingxin, Wang Xu, Wei Min, and Wu Zhengyuan.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.