This standard specifies the general requirements, model composition and markings for the 500-ton segmented barges on the Yangtze River. This standard applies to segmented barges that navigate the Class IV waterways of the Yangtze River and its connecting trunk and branch channels. GB/T 2884.5-1996 Yangtze River System Segmented Barge Model Scale Series - Segmented Barge Model Scale for 500-ton Segmented Barges on the Yangtze River and its connecting trunk and branch channels GB/T2884.5-1996 Standard download decompression password: www.bzxz.net

GB/T 2884.5—1996
Foreword
This standard is a revision of GB2884.5—81 and GB2884.6—81, and the main dimensions of the ship type have been changed. After the revision of this standard, the original GB2884.5—81 and GB2884.6-81 are abolished. The division of waterways in this standard is consistent with GB139—90 "Standards for Inland Waterways".
This standard is proposed by the Ministry of Transport of the People's Republic of China. This standard is under the jurisdiction of the National Technical Committee for Inland Waterway Standardization. The drafting units of this standard are the Institute of Standards and Metrology of the Ministry of Transport and the Yangtze River Ship Design Institute. The drafters of this standard are Liu Yiru, Xiang Zhizhong, and Wang Feifei. This standard was first issued on December 31, 1981, and the Yangtze River Ship Design Institute is entrusted with the interpretation of this standard. W.bzsosocomNational Standard of the People's Republic of China
Dimensions of Integrated barges for the Changjlang waterwayEDiraessions of Integrated barges for the direct transpert In.main-branch routes of the middle-downstresm cf theChangaag snd waterway getwork-50EwTScope
This standard specifies the general requirements, model composition and markings of 500-ton segmented barges in the Yangtze River. GB/R 2884.5--1996
代58
This standard applies to segmented barges for direct transpert In.main-branch routes of the middle-downstresm cf theChangaag snd waterway getwork-50EwTScope
This standard specifies the general requirements, model composition and markings of 500-ton segmented barges in the Yangtze River. GB/R 2884.5--1996
代58
This standard applies to segmented barges for direct transpert In.main-branch routes of the middle-downstresm and the connecting waterway in the middle and lower reaches of the Yangtze River. 2 Definitions
This standard adopts the following definitions:
Water Transport Network Taterayatwork
The inland waterway of the permanent system (including the Beijing-Hangzhou Grand Canal) connected by the Beijing-Kang, Xiang-Guang, Gan-Yue, Zheng-Huai and other canals, including the Yangtze River, Pearl River, Qiangjiang River, Huaihe River, Yellow River, Haihe River, etc.
3 General requirements
3.1 Ship type tonnage, 500t.
3.2 Age type main dimensions, total length 45m, molded breadth 10.8m, draft 1.6~2.1 m,4 model composition
The model consists of four parts:
Barge section tonnage
"Jie" is the first letter of the Chinese pinyin, indicating "section barge" "Net" is the first letter of the Chinese pinyin, indicating "water transport network" "Chang" is the first letter of the Chinese pinyin, indicating "Yangtze River" Approved by the National Technical Supervision Bureau on June 17, 1996 and implemented on January 1, 1997
W.5 markbzxz.net
GR/T28 84.5-1996
5.1 Each barge is equipped with a signboard with the following information: a) ship model, factory serial number, standard number; b) total length, waterline length, molded width, molded depth, designed draft, full load displacement c) manufacturer's name
d) year and month of manufacture.
5.2 The signboard is rectangular in shape, 330mm long and 200mm wide, and is made of metal material (car, aluminum, etc.). 10
W.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.