This standard specifies the technical requirements, test methods, inspection rules, packaging and marking of the emblem of the Macao Special Administrative Region of the People's Republic of China. This standard applies to emblems made of glass fiber reinforced plastics or aluminum alloys. Emblems made of other materials must also refer to this standard. GB 17655-1999 Emblem of the Macao Special Administrative Region GB17655-1999 Standard download decompression password: www.bzxz.net
This standard specifies the technical requirements, test methods, inspection rules, packaging and marking of the emblem of the Macao Special Administrative Region of the People's Republic of China. This standard applies to emblems made of glass fiber reinforced plastics or aluminum alloys. Emblems made of other materials must also refer to this standard.

GB17655—1999
1. Appendix A of this standard, "Description of the Emblem of the Macao Special Administrative Region of the People's Republic of China", is compiled based on Article 1 of the Basic Law of the Macao Special Administrative Region of the People's Republic of China and Article 3 of the Basic Law of the Macao Special Administrative Region of the People's Republic of China (Draft) and other relevant documents and explanations on the drafting work. 2. This standard is based on Annex 2 of the Measures for the Supervision of the Use of the Flag and Emblem of the Macao Special Administrative Region of the People's Republic of China adopted by the Fifth Plenary Session of the National People's Congress on January 16, 1999, and the Explanation of the Emblem of the Macao Special Administrative Region of the People's Republic of China, which formulates the technical requirements for the shape, pattern, scale, etc. of the emblem of the Macao Special Administrative Region of the People's Republic of China, and includes this document as Appendix 3 of this standard. 3. The yellow chromaticity value of the Macao Special Administrative Region in this standard The important technical parameters such as color, surface paint film performance requirements, material strength, micro-surface appearance evaluation, test methods, inspection rules, marking, packaging, etc. refer to the corresponding indicators in GR15093-1994.
The appendices of this standard, Appendix B and Appendix C are the appendices of the standard: This standard is proposed by the Hong Kong and Macao Affairs Office of the State Council and the State Administration for Quality and Technical Supervision. The standard is under the jurisdiction of the State Administration for Quality and Technical Supervision. The responsible drafting unit of this standard: National Technical Committee on Color Standardization, the main drafters of this standard: Xiuru, Guo Chunpeng, Han Yue, Li Xiaobo, Sun Pei 174
1 Scope
National Standard of the People's Republic of China
Emblem of the Macao Special Administrative Region
Regional emblem of Macao Special Administrative RegiunGB 176551999
This standard specifies the technical requirements, test methods, inspection rules and packaging and marking of the emblem of the Macao Special Administrative Region of the People's Republic of China (hereinafter referred to as the emblem).
This standard is applicable to the emblem made of glass fiber reinforced plastic or aluminum alloy. The emblem made of other materials shall refer to this standard. 2 Referenced standards
The texts contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard is published, the versions shown are valid. All standards may be revised and the parties using this standard should explore the possibility of using the latest versions of the following standards. G1/T1419-1983 Test method for bending properties of glass fiber reinforced plastics GB/T 1720-1979
Determination of adhesion of paint film
Determination of water resistance of paint film (n4CT9.403:1980) CB/T 1733 -1993
GB/T 1740 -1979
GR/T 1766 -1995
GB/T 1771--1991
GB/T 3851 -1983
G13/T 397H—1097
(3/T 4380-1984
G13/T 6739 1996
GH/T 9271 -1988
GB3/T 97h1 -14B8
Determination of the resistance of paint films to moisture and heat
Rating method for aging of paints and varnishes (neqISO462811980)Determination of the resistance of paints and varnishes to neutral salt spray (neqTS07253:1984)Test method for the Barcol hardness of fiber reinforced plasticsMethods for measuring the color of objects
Methods for determining the error of roundnessTwo-point and three-point methodPaint film hardness pencil method (eJS5400:1990)Determination of the liquid medium of paints and varnishes (eqvIS 2812:1974)Determination of the 2°, 60\ and $5 mirror gloss of paints and paints without metal additives (n ISO) 2813:1978)
6B/T11186.2-1989 Double measurement method for coating color Part 2 Color measurement disc (e4IS07724-2:1984) (/111186.31189 Disc method for coating color Part 1 Color difference calculation (e1S077243:1984) G11337-1989 Surface error detection
(18150931994 National Emblem
3 Definition
This standard adopts the definitions in column F.
3.1 The emblem of the Macao Special Administrative Region
refers to the emblem with five stars, lotus, bridge and sea water in the center, and "Macao Special Administrative Region of the People's Republic of China" and the text "Macau" (Macao>) written around it. 3.2 Lotus White
Approved by the State Administration of Quality and Technical Supervision on February 1, 1999 and implemented on March 1, 1999
GB17655
refers to the white color of the lotus, bridge and sea water on the regional emblem. 4 Requirements
4.1 Shape and pattern of regional emblems
4.1. 1 The shape and design of the regional emblem are in accordance with the relevant provisions of the Basic Law of the Macao Special Administrative Region of the People's Republic of China and the Description of the Emblem of the Macao Special Administrative Region of the People's Republic of China, see Appendix A 4.1.2 [The regional emblem is shown in Figure 1,
Administrative Region
Circle 1 The emblem of the Macao Special Administrative Region of the People's Republic of China 4.2 Standard scale and allowable error of various parts of the regional emblem 4.2.1 The scale of various parts of the standard regional emblem shall comply with the relevant provisions of the "Description of the Emblem of the Macao Special Administrative Region of the People's Republic of China", see Appendix B
4.2.2 Standard scale and allowable error of various parts of the regional emblem are shown in Table 1 and Figure 2 and Figure 3. 4.2.3 Standard wind micro production analysis diagram and standard data are shown in Appendix C. 4.2.4 When special coal needs to produce non-standard size emblems, they shall be enlarged or reduced in proportion to the standard emblem size and filling error. 176
Edge color ring edge
Green inner circle
Big five-pointed star
Small cornerless star
GR176551999
Table 1 Standard emblem size and allowable error of each part
Main body thickness.mm
Outer edge bevel
Roughness
Width.um
Inside sequence [LL
Angle of the center axis of the letter
Letter quotient.mm
Angle of the center axis of the mother of the tree
Chinese and English characters, thickness seat, TT
Diameter, mm
Thickness.mm
Outer diameter, Lm
Center thickness m
Upper angle distance.mn
Outer diameter, 11
Center thickness, mn
Total width.mm
Chinese medicine flower bottom tip distance from seawater charcoal edge mm
Thickness, mm
Center difference flower top to bottom tip height Degree tum
The distance from the bottom tip of the flower to the original tip of the H color analysis, mm white bridge height. mm
Business degree·nat
(green department office)
(white part)
Height two. mm
Height three. mm
Height four, nm
Thickness mm
Height-mm
Height two+mm
Height two, mrt
Business degree four mm
Micro bottom surface unevenness
Micro back rain installation screw hole
Figure 2 middle generation
1 000= 6
130±5
28—1
20—2
20--·2
M10×1. 5
360*/22
480—3
12-±1
12·- 1
To be determined by the manufacturer and the user
GR17655-
2 Standard micro-diagram dimensions
G17655—1999
Figure 3 Schematic diagram of the back mounting holes of the standard micro-diagram
Basis: The front mounting hole of the micro-diagram and the distance between the mounting holes and the center radius of the micro-diagram are designed by the manufacturer according to actual needs. 4.3 Micro-diagram surface color and allowable error
4. 3. 1 Five-star yellow on the micro-surface: The five-star yellow on the regional emblem made of glass fiber reinforced plastic and aluminum alloy shall be subject to the five-star yellow on the regional emblem made of glass fiber reinforced plastic in CB 15093. 4.3.2 Green on the micro-surface: The chromaticity value and allowable error of the green regional emblem made of glass fiber reinforced plastic and aluminum alloy are Y.一3.7±1.0 r15=0.26±0.01 3u=0.39±0.01 4.3.3 The chromaticity value Y of the three colors of the lotus, bridge, seawater and bottom surface of the text area shall not be less than 80. 4.3.4 The chromaticity values ​​of the five colors of the emblem, the green of the micro-face, the lotus, bridge, seawater and the bottom surface of the text area made of other materials shall be consistent with the provisions of 4.3.1.4.3.2, 2, and 3.3 in the technical standards. 4.4 Chromaticity data calculation
The chromaticity data in 1.3 is calculated according to the CIF standard (D) signal and the CIE1964 supplementary standard chromaticity system. 4.5 Performance requirements for the continuous film of the emblem surface
The performance requirements for the continuous film of the micro-face are shown in Table 2.
Table 2 Performance requirements for micro-surface paint film
Film color
and appearance
Color
4.3
Enqiu Pingchu Guangyuan
Adhesion, grade i
Weather resistance, grade gloss (60°), secretion
[Xieqiu (24h)
No pooling or falling off
Moisture and heat resistance
(? d). Grade
4.6 Wind resistance
GB17655
4. 6. 1 Flexural strength of glass fiber reinforced material shall not be less than 1:1MPa1. 4.6.2 The hardness of the glass red fiber reinforced plastic surface shall not be less than 30 (Pascal) 4.6.3, road ball punching strength: the micro-emblem parts are full of cracks, especially the area 4.7: The appearance evaluation of the emblem surface
[The external standard evaluation of the emblem surface is carried out for each emblem. The evaluation requirements are shown in Table 3. Table 3 Emblem appearance evaluation requirements
The surface color
The surface pattern is clear, and there shall be no shrinkage, thermal cracking, cracking, deformation, edge, broken edge, and no obvious external flower, sand powder, impurities, holes
No obvious dirt, oil, color, clean color is allowed 4.8 The surface of the micro-emblem surface of the area shall be used
4.8.1 The font on the emblem surface\The People's Republic of China Macao Special Administrative Region should comply with the standard of the teaching sample of the area 4.8. 2 Micro and 1. Appendix \M4LAII\ (Macau) green font should conform to the standard micro-words shown in Figure 1 People's Republic of China
Macau Special Administrative Region
People's Republic of China
Macau Special Administrative Region
Figure Micro-words in Chinese Standard
5 Test method
GB17655-1999
5.1 The measurement of the dimensions and allowable errors of each part of the standard micro-word should use qualified measuring tools with an accuracy of not less than 0, i%. 5.2 The color measurement shall be carried out in accordance with the provisions of GB/T 3979, GB/11186.2, GB/T 11186.3. 5.3 The performance of micro-surface paint film shall be measured in accordance with the provisions of GB/T 1720, GB/T 1733, GB/T 1766, GB/T 9754, GB/T 6733, GB/T 927-, GB/T1740, GB/T1771. 5.4 Strength test
5.4.1 The bending strength test of glass fiber reinforced plastic shall be carried out in accordance with the provisions of CB/T 1449; 5.4.2 Drop ball impact: Place the sample with the front side facing F. horizontally on the cement floor L. Place a steel ball weighing 112 g at a distance of 2 m from the sample t., and drop the steel ball to make the surface of the sample be in the same plane. Punch the sample repeatedly twice, and observe whether there are cracks, deformation, delamination, etc. on the surface of the sample.
5.4.3 Determine the hardness of the glass fiber reinforced plastic product according to the provisions of GB/T3854. 5.5 The hardness test shall be carried out according to the method b of 1.4 in GB/T 13/T 11337-1989. 5.6 The hardness test shall be carried out according to the two-point measurement method of 2.3 in GB/T4380-1984. 6 Inspection rules
6.1 Each surface micro-plate shall be subjected to inspection before leaving the factory. The inspection includes the shape, pattern and size of the surface, the appearance evaluation of the surface, the color quality, and the quality of the surface.
When the material, formula, and process change, type inspection shall be carried out. 6.2 During the factory inspection, all the inspection items of each product shall be qualified and judged as qualified products, otherwise they shall be unqualified products. Unqualified products shall not be shipped.
During type inspection, if all the quality requirements specified in Chapter 4 are qualified, it is determined to be qualified for type inspection and can be produced in a formal manner. 7 Marking and Packaging
7.1 Marking
The name and address of the manufacturer and the product number are marked on the back of each micro-particle. 7.2 Packaging
7.2. 1 Each micro-particle is packed separately, and the packaging must ensure that the quality of the micro-particle is not damaged and is convenient for transportation and storage. The outer packaging should indicate the product name, specification, material, packaging size, quantity, manufacturer's name and address, trademark and the number of national standards for transportation. The package should be accompanied by the necessary accessories for installation, installation and maintenance instructions and inspection certificate. The certificate should indicate the micro-particle specifications, materials, product number, production date, manufacturer's name and address, trademark, inspector's name (code), 7.2.2 The packaging of batch micro-particles should ensure that the quality of the micro-particles is not damaged and is convenient for transportation. The packaging surface should indicate the product name, specifications, material, number of packages, packaging size, weight, manufacturer name and address, and transportation mark. 181
GB17655—1999
(Appendix to the standard)
The emblem of the Macao Special Administrative Region of the People's Republic of China is a five-star, lotus, bridge, and sea water in the middle, with "People's Republic of China Macao Special Administrative Region" and "Macao" in Portuguese.
(Quoted from Article 10 of the Basic Law of the Macao Special Administrative Region of the People's Republic of China) The regional emblem of the Macao Special Administrative Region is circular, with "Macao Special Administrative Region of the People's Republic of China" and the Portuguese word "Macao" written on its outer circle. The pattern and meaning in the middle are the same as those in the regional flag.
(Quoted from the "Draft Basic Law of the Macao Special Administrative Region of the People's Republic of China" and the Explanation of the Drafting Work)
(Quoted from Annex 2 to the Interim Measures for the Use of the Flag and Emblem of the Macao Special Administrative Region of the People's Republic of China) 1. The regional emblem is circular, and consists of a green circular narrow edge, an outer circle of text area, a green inner circle and a pattern of hills, stars, lotus, bridges and sea water.
The outer circle of the text area is located between the narrow green ring edge and the inner green area. It is green. The outer circle of the text area is evenly arranged with the Chinese traditional Chinese characters "People's Republic of China and Macao Special Administrative Region". The lower end of the characters is facing the center of the emblem. The lower part of the characters is evenly arranged with the \MACAU\ Portuguese area logo. The upper letters are facing the center of the micro-face. The Chinese characters are all distributed based on the central axis of the micro-face.
1. In the middle of the inner circle of the emblem, there is a color flower composed of three petals. The golden five-pointed star located above the flower is called the small five-pointed star. Each of the five-pointed stars is arranged in a left-right direction. The five-pointed stars are radially distributed with the center of the emblem as the center. The center of the micro-face is at the bottom corner.
4. Below the lotus is the blue bridge and the sea water with green and white alternating from near to far. The pattern of the regional microcircle is shown in Figure B1. 183
GB17655-1999
Administrative Region
Figure BI The regional emblem pattern of the Macao Special Administrative Region of the People's Republic of China Five, the general sizes of the regional microcircle are as follows: No. 1: diameter 100cm
No. 2: diameter 80cnt
No. 3: diameter 60cm.
When producing different sizes of micro-areas due to special needs, they shall be enlarged or reduced in proportion to the general scale 183
VI. Micro-area positioning diagram
360*/22
GB 176551999
Figure B2 Micro-area positioning diagram
VII. Chinese and Portuguese characters on the micro-area emblem
GB 176551999
People's Republic of China
Macao Special Administrative Region
People's Republic of China
Macao Special Administrative Region
Figure B3 Standard characters in Chinese on the micro-area emblem3
Enqiu Pingchu Guangyuan
Adhesion, Grade I
Weather resistance, Grade Gloss (60°), Secretion
[Xieqiu (24h)
No pooling or falling off
Moisture and heat resistance
(? d). Grade
4.6 Wind resistance
GB17655
4. 6. 1 Glass fiber reinforced material flexural strength shall not be less than 1:1MPa1. 4.6.2 The hardness of the glass red fiber reinforced plastic surface shall not be less than 30 (Pascal) 4.6.3, road ball punching strength: the micro-emblem parts are full of cracks, especially the area 4.7: The appearance evaluation of the emblem surface
[The external standard evaluation of the emblem surface is carried out for each emblem. The evaluation requirements are shown in Table 3. Table 3 Emblem appearance evaluation requirements
The surface color
The surface pattern is clear, and there shall be no shrinkage, thermal cracking, cracking, deformation, edge, broken edge, and no obvious external flower, sand powder, impurities, holes
No obvious dirt, oil, color, clean color is allowed 4.8 The surface of the micro-emblem surface of the area shall be used
4.8.1 The font on the emblem surface\The People's Republic of China Macao Special Administrative Region should comply with the standard of the teaching sample of the area 4.8. 2 Micro and 1. Appendix \M4LAII\ (Macau) green font should conform to the standard micro-words shown in Figure 1 People's Republic of China
Macau Special Administrative Region
People's Republic of China
Macau Special Administrative Region
Figure Micro-words in Chinese Standard
5 Test method
GB17655-1999
5.1 The measurement of the dimensions and allowable errors of each part of the standard micro-word should use qualified measuring tools with an accuracy of not less than 0, i%. 5.2 The color measurement shall be carried out in accordance with the provisions of GB/T 3979, GB/11186.2, GB/T 11186.3. 5.3 The performance of micro-surface paint film shall be measured in accordance with the provisions of GB/T 1720, GB/T 1733, GB/T 1766, GB/T 9754, GB/T 6733, GB/T 927-, GB/T1740, GB/T1771. 5.4 Strength test
5.4.1 The bending strength test of glass fiber reinforced plastic shall be carried out in accordance with the provisions of CB/T 1449; 5.4.2 Drop ball impact: Place the sample with the front side facing F. horizontally on the cement floor L. Place a steel ball weighing 112 g at a distance of 2 m from the sample t., and drop the steel ball to make the surface of the sample be in the same plane. Punch the sample repeatedly twice, and observe whether there are cracks, deformation, delamination, etc. on the surface of the sample.
5.4.3 Determine the hardness of the glass fiber reinforced plastic product according to the provisions of GB/T3854. 5.5 The hardness test shall be carried out according to the method b of 1.4 in GB/T 13/T 11337-1989. 5.6 The hardness test shall be carried out according to the two-point measurement method of 2.3 in GB/T4380-1984. 6 Inspection rules
6.1 Each surface micro-plate shall be subjected to inspection before leaving the factory. The inspection includes the shape, pattern and size of the surface, the appearance evaluation of the surface, the color quality, and the quality of the surface.
When the material, formula, and process change, type inspection shall be carried out. 6.2 During the factory inspection, all the inspection items of each product shall be qualified and judged as qualified products, otherwise they shall be unqualified products. Unqualified products shall not be shipped.
During type inspection, if all the quality requirements specified in Chapter 4 are qualified, it is determined to be qualified for type inspection and can be produced in a formal manner. 7 Marking and Packaging
7.1 Marking
The name and address of the manufacturer and the product number are marked on the back of each micro-particle. 7.2 Packaging
7.2. 1 Each micro-particle is packed separately, and the packaging must ensure that the quality of the micro-particle is not damaged and is convenient for transportation and storage. The outer packaging should indicate the product name, specification, material, packaging size, quantity, manufacturer's name and address, trademark and the number of national standards for transportation. The package should be accompanied by the necessary accessories for installation, installation and maintenance instructions and inspection certificate. The certificate should indicate the micro-particle specifications, materials, product number, production date, manufacturer's name and address, trademark, inspector's name (code), 7.2.2 The packaging of batch micro-particles should ensure that the quality of the micro-particles is not damaged and is convenient for transportation. The packaging surface should indicate the product name, specifications, material, number of packages, packaging size, weight, manufacturer name and address, and transportation mark. 181
GB17655—1999
(Appendix to the standard)
The emblem of the Macao Special Administrative Region of the People's Republic of China is a five-star, lotus, bridge, and sea water in the middle, with "People's Republic of China Macao Special Administrative Region" and "Macao" in Portuguese.
(Quoted from Article 10 of the Basic Law of the Macao Special Administrative Region of the People's Republic of China) The regional emblem of the Macao Special Administrative Region is circular, with "Macao Special Administrative Region of the People's Republic of China" and the Portuguese word "Macao" written on its outer circle. The pattern and meaning in the middle are the same as those in the regional flag.
(Quoted from the "Draft Basic Law of the Macao Special Administrative Region of the People's Republic of China" and the Explanation of the Drafting Work)
(Quoted from Annex 2 to the Interim Measures for the Use of the Flag and Emblem of the Macao Special Administrative Region of the People's Republic of China) 1. The regional emblem is circular, and consists of a green circular narrow edge, an outer circle of text area, a green inner circle and a pattern of hills, stars, lotus, bridges and sea water.
The outer circle of the text area is located between the narrow green ring edge and the inner green area. It is green. The outer circle of the text area is evenly arranged with the Chinese traditional Chinese characters "People's Republic of China and Macao Special Administrative Region". The lower end of the characters is facing the center of the emblem. The lower part of the characters is evenly arranged with the \MACAU\ Portuguese area logo. The upper letters are facing the center of the micro-face. The Chinese characters are all distributed based on the central axis of the micro-face.
1. In the middle of the inner circle of the emblem, there is a color flower composed of three petals. The golden five-pointed star located above the flower is called the small five-pointed star. Each of the five-pointed stars is arranged in a left-right direction. The five-pointed stars are radially distributed with the center of the emblem as the center. The center of the micro-face is at the bottom corner.
4. Below the lotus is the blue bridge and the sea water with green and white alternating from near to far. The pattern of the regional microcircle is shown in Figure B1. 183
GB17655-1999
Administrative Region
Figure BI The regional emblem pattern of the Macao Special Administrative Region of the People's Republic of China Five, the general sizes of the regional microcircle are as follows: No. 1: diameter 100cm
No. 2: diameter 80cnt
No. 3: diameter 60cm.
When producing different sizes of micro-areas due to special needs, they shall be enlarged or reduced in proportion to the general scale 183
VI. Micro-area positioning diagram
360*/22
GB 176551999
Figure B2 Micro-area positioning diagram
VII. Chinese and Portuguese characters on the micro-area emblem
GB 176551999
People's Republic of China
Macao Special Administrative Region
People's Republic of China
Macao Special Administrative Region
Figure B3 Standard characters in Chinese on the micro-area emblem3
Enqiu Pingchu Guangyuan
Adhesion, Grade I
Weather resistance, Grade Gloss (60°), Secretion
[Xieqiu (24h)
No pooling or falling off
Moisture and heat resistance
(? d). Grade
4.6 Wind resistance
GB17655
4. 6. 1 Glass fiber reinforced material flexural strength shall not be less than 1:1MPa1. 4.6.2 The hardness of the glass red fiber reinforced plastic surface shall not be less than 30 (Pascal) 4.6.3, road ball punching strength: the micro-emblem parts are full of cracks, especially the area 4.7: The appearance evaluation of the emblem surface
[The external standard evaluation of the emblem surface is carried out for each emblem. The evaluation requirements are shown in Table 3. Table 3 Emblem appearance evaluation requirements
The surface color
The surface pattern is clear, and there shall be no shrinkage, thermal cracking, cracking, deformation, edge, broken edge, and no obvious external flower, sand powder, impurities, holes
No obvious dirt, oil, color, clean color is allowed 4.8 The surface of the micro-emblem surface of the area shall be used
4.8.1 The font on the emblem surface\The People's Republic of China Macao Special Administrative Region should comply with the standard of the teaching sample of the area 4.8. 2 Micro and 1. Appendix \M4LAII\ (Macau) green font should conform to the standard micro-words shown in Figure 1 People's Republic of China
Macau Special Administrative RegionWww.bzxZ.net
People's Republic of China
Macau Special Administrative Region
Figure Micro-words in Chinese Standard
5 Test method
GB17655-1999
5.1 The measurement of the dimensions and allowable errors of each part of the standard micro-word should use qualified measuring tools with an accuracy of not less than 0, i%. 5.2 The color measurement shall be carried out in accordance with the provisions of GB/T 3979, GB/11186.2, GB/T 11186.3. 5.3 The performance of micro-surface paint film shall be measured in accordance with the provisions of GB/T 1720, GB/T 1733, GB/T 1766, GB/T 9754, GB/T 6733, GB/T 927-, GB/T1740, GB/T1771. 5.4 Strength test
5.4.1 The bending strength test of glass fiber reinforced plastic shall be carried out in accordance with the provisions of CB/T 1449; 5.4.2 Drop ball impact: Place the sample with the front side facing F. horizontally on the cement floor L. Place a steel ball weighing 112 g at a distance of 2 m from the sample t., and drop the steel ball to make the surface of the sample be in the same plane. Punch the sample repeatedly twice, and observe whether there are cracks, deformation, delamination, etc. on the surface of the sample.
5.4.3 Determine the hardness of the glass fiber reinforced plastic product according to the provisions of GB/T3854. 5.5 The hardness test shall be carried out according to the method b of 1.4 in GB/T 13/T 11337-1989. 5.6 The hardness test shall be carried out according to the two-point measurement method of 2.3 in GB/T4380-1984. 6 Inspection rules
6.1 Each surface micro-plate shall be subjected to inspection before leaving the factory. The inspection includes the shape, pattern and size of the surface, the appearance evaluation of the surface, the color quality, and the quality of the surface.
When the material, formula, and process change, type inspection shall be carried out. 6.2 During the factory inspection, all the inspection items of each product shall be qualified and judged as qualified products, otherwise they shall be unqualified products. Unqualified products shall not be shipped.
During type inspection, if all the quality requirements specified in Chapter 4 are qualified, it is determined to be qualified for type inspection and can be produced in a formal manner. 7 Marking and Packaging
7.1 Marking
The name and address of the manufacturer and the product number are marked on the back of each micro-particle. 7.2 Packaging
7.2. 1 Each micro-particle is packed separately, and the packaging must ensure that the quality of the micro-particle is not damaged and is convenient for transportation and storage. The outer packaging should indicate the product name, specification, material, packaging size, quantity, manufacturer's name and address, trademark and the number of national standards for transportation. The package should be accompanied by the necessary accessories for installation, installation and maintenance instructions and inspection certificate. The certificate should indicate the micro-particle specifications, materials, product number, production date, manufacturer's name and address, trademark, inspector's name (code), 7.2.2 The packaging of batch micro-particles should ensure that the quality of the micro-particles is not damaged and is convenient for transportation. The packaging surface should indicate the product name, specifications, material, number of packages, packaging size, weight, manufacturer name and address, and transportation mark. 181
GB17655—1999
(Appendix to the standard)
The emblem of the Macao Special Administrative Region of the People's Republic of China is a five-star, lotus, bridge, and sea water in the middle, with "People's Republic of China Macao Special Administrative Region" and "Macao" in Portuguese.
(Quoted from Article 10 of the Basic Law of the Macao Special Administrative Region of the People's Republic of China) The regional emblem of the Macao Special Administrative Region is circular, with "Macao Special Administrative Region of the People's Republic of China" and the Portuguese word "Macao" written on its outer circle. The pattern and meaning in the middle are the same as those in the regional flag.
(Quoted from the "Draft Basic Law of the Macao Special Administrative Region of the People's Republic of China" and the Explanation of the Drafting Work)
(Quoted from Annex 2 to the Interim Measures for the Use of the Flag and Emblem of the Macao Special Administrative Region of the People's Republic of China) 1. The regional emblem is circular, and consists of a green circular narrow edge, an outer circle of text area, a green inner circle and a pattern of hills, stars, lotus, bridges and sea water.
The outer circle of the text area is located between the narrow green ring edge and the inner green area. It is green. The outer circle of the text area is evenly arranged with the Chinese traditional Chinese characters "People's Republic of China and Macao Special Administrative Region". The lower end of the characters is facing the center of the emblem. The lower part of the characters is evenly arranged with the \MACAU\ Portuguese area logo. The upper letters are facing the center of the micro-face. The Chinese characters are all distributed based on the central axis of the micro-face.
1. In the middle of the inner circle of the emblem, there is a color flower composed of three petals. The golden five-pointed star located above the flower is called the small five-pointed star. Each of the five-pointed stars is arranged in a left-right direction. The five-pointed stars are radially distributed with the center of the emblem as the center. The center of the micro-face is at the bottom corner.
4. Below the lotus is the blue bridge and the sea water with green and white alternating from near to far. The pattern of the regional microcircle is shown in Figure B1. 183
GB17655-1999
Administrative Region
Figure BI The regional emblem pattern of the Macao Special Administrative Region of the People's Republic of China Five, the general sizes of the regional microcircle are as follows: No. 1: diameter 100cm
No. 2: diameter 80cnt
No. 3: diameter 60cm.
When producing different sizes of micro-areas due to special needs, they shall be enlarged or reduced in proportion to the general scale 183
VI. Micro-area positioning diagram
360*/22
GB 176551999
Figure B2 Micro-area positioning diagram
VII. Chinese and Portuguese characters on the micro-area emblem
GB 176551999
People's Republic of China
Macao Special Administrative Region
People's Republic of China
Macao Special Administrative Region
Figure B3 Standard characters in Chinese on the micro-area emblemAppendix \M4LAII\ (Macau) The green font should conform to the standard font of the micro-plate shown in Figure 1. The Chinese characters on the micro-plate surface are the Chinese characters of the standard font of the micro-plate. 5 Test method GB17655-1999 5.1 The measurement of the dimensions and allowable errors of each part of the standard micro-plate should be carried out using qualified measuring tools with an accuracy of not less than 0.1%. 5.2 The color measurement shall be carried out in accordance with the provisions of GB/T 3979, GB/11186.2 and GB/T 11186.3. 5.3 The performance of micro-surface paint film shall be measured in accordance with the provisions of GB/T 1720, GB/T 1733, GB/T 1766, GB/T 9754, GB/T 6733, GB/T 927-, GB/T1740, GB/T1771. 5.4 Strength test
5.4.1 The bending strength test of glass fiber reinforced plastic shall be carried out in accordance with the provisions of CB/T 1449; 5.4.2 Drop ball impact: Place the sample with the front side facing F. horizontally on the cement floor L. Place a steel ball weighing 112 g at a distance of 2 m from the sample t., and drop the steel ball to make the surface of the sample be in the same plane. Punch the sample repeatedly twice, and observe whether there are cracks, deformation, delamination, etc. on the surface of the sample.
5.4.3 Determine the hardness of the glass fiber reinforced plastic product according to the provisions of GB/T3854. 5.5 The hardness test shall be carried out according to the method b of 1.4 in GB/T 13/T 11337-1989. 5.6 The hardness test shall be carried out according to the two-point measurement method of 2.3 in GB/T4380-1984. 6 Inspection rules
6.1 Each surface micro-plate shall be subjected to inspection before leaving the factory. The inspection includes the shape, pattern and size of the surface, the appearance evaluation of the surface, the color quality, and the quality of the surface.
When the material, formula, and process change, type inspection shall be carried out. 6.2 During the factory inspection, all the inspection items of each product shall be qualified and judged as qualified products, otherwise they shall be unqualified products. Unqualified products shall not be shipped.
During type inspection, if all the quality requirements specified in Chapter 4 are qualified, it is determined to be qualified for type inspection and can be produced in a formal manner. 7 Marking and Packaging
7.1 Marking
The name and address of the manufacturer and the product number are marked on the back of each micro-particle. 7.2 Packaging
7.2. 1 Each micro-particle is packed separately, and the packaging must ensure that the quality of the micro-particle is not damaged and is convenient for transportation and storage. The outer packaging should indicate the product name, specification, material, packaging size, quantity, manufacturer's name and address, trademark and the number of national standards for transportation. The package should be accompanied by the necessary accessories for installation, installation and maintenance instructions and inspection certificate. The certificate should indicate the micro-particle specifications, materials, product number, production date, manufacturer's name and address, trademark, inspector's name (code), 7.2.2 The packaging of batch micro-particles should ensure that the quality of the micro-particles is not damaged and is convenient for transportation. The packaging surface should indicate the product name, specifications, material, number of packages, packaging size, weight, manufacturer name and address, and transportation mark. 181
GB17655—1999
(Appendix to the standard)
The emblem of the Macao Special Administrative Region of the People's Republic of China is a five-star, lotus, bridge, and sea water in the middle, with "People's Republic of China Macao Special Administrative Region" and "Macao" in Portuguese.
(Quoted from Article 10 of the Basic Law of the Macao Special Administrative Region of the People's Republic of China) The regional emblem of the Macao Special Administrative Region is circular, with "Macao Special Administrative Region of the People's Republic of China" and the Portuguese word "Macao" written on its outer circle. The pattern and meaning in the middle are the same as those in the regional flag.
(Quoted from the "Draft Basic Law of the Macao Special Administrative Region of the People's Republic of China" and the Explanation of the Drafting Work)
(Quoted from Annex 2 to the Interim Measures for the Use of the Flag and Emblem of the Macao Special Administrative Region of the People's Republic of China) 1. The regional emblem is circular, and consists of a green circular narrow edge, an outer circle of text area, a green inner circle and a pattern of hills, stars, lotus, bridges and sea water.
The outer circle of the text area is located between the narrow green ring edge and the inner green area. It is green. The outer circle of the text area is evenly arranged with the Chinese traditional Chinese characters "People's Republic of China and Macao Special Administrative Region". The lower end of the characters is facing the center of the emblem. The lower part of the characters is evenly arranged with the \MACAU\ Portuguese area logo. The upper letters are facing the center of the micro-face. The Chinese characters are all distributed based on the central axis of the micro-face.
1. In the middle of the inner circle of the emblem, there is a color flower composed of three petals. The golden five-pointed star located above the flower is called the small five-pointed star. Each of the five-pointed stars is arranged in a left-right direction. The five-pointed stars are radially distributed with the center of the emblem as the center. The center of the micro-face is at the bottom corner.
4. Below the lotus is the blue bridge and the sea water with green and white alternating from near to far. The pattern of the regional microcircle is shown in Figure B1. 183
GB17655-1999
Administrative Region
Figure BI The regional emblem pattern of the Macao Special Administrative Region of the People's Republic of China Five, the general sizes of the regional microcircle are as follows: No. 1: diameter 100cm
No. 2: diameter 80cnt
No. 3: diameter 60cm.
When producing different sizes of micro-areas due to special needs, they shall be enlarged or reduced in proportion to the general scale 183
VI. Micro-area positioning diagram
360*/22
GB 176551999
Figure B2 Micro-area positioning diagram
VII. Chinese and Portuguese characters on the micro-area emblem
GB 176551999
People's Republic of China
Macao Special Administrative Region
People's Republic of China
Macao Special Administrative Region
Figure B3 Standard characters in Chinese on the micro-area emblemAppendix \M4LAII\ (Macau) The green font should conform to the standard font of the micro-plate shown in Figure 1. The Chinese characters on the micro-plate surface are the Chinese characters of the standard font of the micro-plate. 5 Test method GB17655-1999 5.1 The measurement of the dimensions and allowable errors of each part of the standard micro-plate should be carried out using qualified measuring tools with an accuracy of not less than 0.1%. 5.2 The color measurement shall be carried out in accordance with the provisions of GB/T 3979, GB/11186.2 and GB/T 11186.3. 5.3 The performance of micro-surface paint film shall be measured in accordance with the provisions of GB/T 1720, GB/T 1733, GB/T 1766, GB/T 9754, GB/T 6733, GB/T 927-, GB/T1740, GB/T1771. 5.4 Strength test
5.4.1 The bending strength test of glass fiber reinforced plastic shall be carried out in accordance with the provisions of CB/T 1449; 5.4.2 Drop ball impact: Place the sample with the front side facing F. horizontally on the cement floor L. Place a steel ball weighing 112 g at a distance of 2 m from the sample t., and drop the steel ball to make the surface of the sample be in the same plane. Punch the sample repeatedly twice, and observe whether there are cracks, deformation, delamination, etc. on the surface of the sample.
5.4.3 Determine the hardness of the glass fiber reinforced plastic product according to the provisions of GB/T3854. 5.5 The hardness test shall be carried out according to the method b of 1.4 in GB/T 13/T 11337-1989. 5.6 The hardness test shall be carried out according to the two-point measurement method of 2.3 in GB/T4380-1984. 6 Inspection rules
6.1 Each surface micro-plate shall be subjected to inspection before leaving the factory. The inspection includes the shape, pattern and size of the surface, the appearance evaluation of the surface, the color quality, and the quality of the surface.
When the material, formula, and process change, type inspection shall be carried out. 6.2 During the factory inspection, all the inspection items of each product shall be qualified and judged as qualified products, otherwise they shall be unqualified products. Unqualified products shall not be shipped.
During type inspection, if all the quality requirements specified in Chapter 4 are qualified, it is determined to be qualified for type inspection and can be produced in a formal manner. 7 Marking and Packaging
7.1 Marking
The name and address of the manufacturer and the product number are marked on the back of each micro-particle. 7.2 Packaging
7.2. 1 Each micro-particle is packed separately, and the packaging must ensure that the quality of the micro-particle is not damaged and is convenient for transportation and storage. The outer packaging should indicate the product name, specification, material, packaging size, quantity, manufacturer's name and address, trademark and the number of national standards for transportation. The package should be accompanied by the necessary accessories for installation, installation and maintenance instructions and inspection certificate. The certificate should indicate the micro-particle specifications, materials, product number, production date, manufacturer's name and address, trademark, inspector's name (code), 7.2.2 The packaging of batch micro-particles should ensure that the quality of the micro-particles is not damaged and is convenient for transportation. The packaging surface should indicate the product name, specifications, material, number of packages, packaging size, weight, manufacturer name and address, and transportation mark. 181
GB17655—1999
(Appendix to the standard)
The emblem of the Macao Special Administrative Region of the People's Republic of China is a five-star, lotus, bridge, and sea water in the middle, with "People's Republic of China Macao Special Administrative Region" and "Macao" in Portuguese.
(Quoted from Article 10 of the Basic Law of the Macao Special Administrative Region of the People's Republic of China) The regional emblem of the Macao Special Administrative Region is circular, with "Macao Special Administrative Region of the People's Republic of China" and the Portuguese word "Macao" written on its outer circle. The pattern and meaning in the middle are the same as those in the regional flag.
(Quoted from the "Draft Basic Law of the Macao Special Administrative Region of the People's Republic of China" and the Explanation of the Drafting Work)
(Quoted from Annex 2 to the Interim Measures for the Use of the Flag and Emblem of the Macao Special Administrative Region of the People's Republic of China) 1. The regional emblem is circular, and consists of a green circular narrow edge, an outer circle of text area, a green inner circle and a pattern of hills, stars, lotus, bridges and sea water.
The outer circle of the text area is located between the narrow green ring edge and the inner green area. It is green. The outer circle of the text area is evenly arranged with the Chinese traditional Chinese characters "People's Republic of China and Macao Special Administrative Region". The lower end of the characters is facing the center of the emblem. The lower part of the characters is evenly arranged with the \MACAU\ Portuguese area logo. The upper letters are facing the center of the micro-face. The Chinese characters are all distributed based on the central axis of the micro-face.
1. In the middle of the inner circle of the emblem, there is a color flower composed of three petals. The golden five-pointed star located above the flower is called the small five-pointed star. Each of the five-pointed stars is arranged in a left-right direction. The five-pointed stars are radially distributed with the center of the emblem as the center. The center of the micro-face is at the bottom corner.
4. Below the lotus is the blue bridge and the sea water with green and white alternating from near to far. The pattern of the regional microcircle is shown in Figure B1. 183
GB17655-1999
Administrative Region
Figure BI The regional emblem pattern of the Macao Special Administrative Region of the People's Republic of China Five, the general sizes of the regional microcircle are as follows: No. 1: diameter 100cm
No. 2: diameter 80cnt
No. 3: diameter 60cm.
When producing different sizes of micro-areas due to special needs, they shall be enlarged or reduced in proportion to the general scale 183
VI. Micro-area positioning diagram
360*/22
GB 176551999
Figure B2 Micro-area positioning diagram
VII. Chinese and Portuguese characters on the micro-area emblem
GB 176551999
People's Republic of China
Macao Special Administrative Region
People's Republic of China
Macao Special Administrative Region
Figure B3 Standard characters in Chinese on the micro-area emblemThe package should be accompanied by the necessary accessories for installation, installation and maintenance instructions and inspection certificate. The certificate should indicate the specifications, materials, product number, date of manufacture, name and address of the manufacturer, trademark, name and address of the inspector, 7.2.2 The packaging of batch micro-products should ensure that the quality of the micro-products is not damaged and is convenient for transportation. The product name, specifications, materials, number of packages, packaging size, weight, name and address of the manufacturer, and transportation marks should be marked on the surface of the package. 181
GB17655—1999
(Appendix to the standard)
Description of the emblem of the Macao Special Administrative Region of the People's Republic of China The emblem of the Macao Special Administrative Region, with five stars, lotus, bridge and sea water in the middle, and "People's Republic of China Macao Special Administrative Region" and "Macao" in Portuguese are written around it.
(Quoted from Article 10 of the Basic Law of the Macao Special Administrative Region of the People's Republic of China) The regional emblem of the Macao Special Administrative Region is circular, with "Macao Special Administrative Region of the People's Republic of China" and the Portuguese word "Macao" written on its outer circle. The pattern and meaning in the middle are the same as those in the regional flag.
(Quoted from the "Draft Basic Law of the Macao Special Administrative Region of the People's Republic of China" and the Explanation of the Drafting Work)
(Quoted from Annex 2 to the Interim Measures for the Use of the Flag and Emblem of the Macao Special Administrative Region of the People's Republic of China) 1. The regional emblem is circular, and consists of a green circular narrow edge, an outer circle of text area, a green inner circle and a pattern of hills, stars, lotus, bridges and sea water.
The outer circle of the text area is located between the narrow green ring edge and the inner green area. It is green. The outer circle of the text area is evenly arranged with the Chinese traditional Chinese characters "People's Republic of China and Macao Special Administrative Region". The lower end of the characters is facing the center of the emblem. The lower part of the characters is evenly arranged with the \MACAU\ Portuguese area logo. The upper letters are facing the center of the micro-face. The Chinese characters are all distributed based on the central axis of the micro-face.
1. In the middle of the inner circle of the emblem, there is a color flower composed of three petals. The golden five-pointed star located above the flower is called the small five-pointed star. Each of the five-pointed stars is arranged in a left-right direction. The five-pointed stars are radially distributed with the center of the emblem as the center. The center of the micro-face is at the bottom corner.
4. Below the lotus is the blue bridge and the sea water with green and white alternating from near to far. The pattern of the regional microcircle is shown in Figure B1. 183
GB17655-1999
Administrative Region
Figure BI The regional emblem pattern of the Macao Special Administrative Region of the People's Republic of China Five, the general sizes of the regional microcircle are as follows: No. 1: diameter 100cm
No. 2: diameter 80cnt
No. 3: diameter 60cm.
When producing different sizes of micro-areas due to special needs, they shall be enlarged or reduced in proportion to the general scale 183
VI. Micro-area positioning diagram
360*/22
GB 176551999
Figure B2 Micro-area positioning diagram
VII. Chinese and Portuguese characters on the micro-area emblem
GB 176551999
People's Republic of China
Macao Special Administrative Region
People's Republic of China
Macao Special Administrative Region
Figure B3 Standard characters in Chinese on the micro-area emblemThe package should be accompanied by the necessary accessories for installation, installation and maintenance instructions and inspection certificate. The certificate should indicate the specifications, materials, product number, date of manufacture, name and address of the manufacturer, trademark, name and address of the inspector, 7.2.2 The packaging of batch micro-products should ensure that the quality of the micro-products is not damaged and is convenient for transportation. The product name, specifications, materials, number of packages, packaging size, weight, name and address of the manufacturer, and transportation marks should be marked on the surface of the package. 181
GB17655—1999
(Appendix to the standard)
Description of the emblem of the Macao Special Administrative Region of the People's Republic of China The emblem of the Macao Special Administrative Region, with five stars, lotus, bridge and sea water in the middle, and "People's Republic of China Macao Special Administrative Region" and "Macao" in Portuguese are written around it.
(Quoted from Article 10 of the Basic Law of the Macao Special Administrative Region of the People's Republic of China) The regional emblem of the Macao Special Administrative Region is circular, with "Macao Special Administrative Region of the People's Republic of China" and the Portuguese word "Macao" written on its outer circle. The pattern and meaning in the middle are the same as those in the regional flag.
(Quoted from the "Draft Basic Law of the Macao Special Administrative Region of the People's Republic of China" and the Explanation of the Drafting Work)
(Quoted from Annex 2 to the Interim Measures for the Use of the Flag and Emblem of the Macao Special Administrative Region of the People's Republic of China) 1. The regional emblem is circular, and consists of a green circular narrow edge, an outer circle of text area, a green inner circle and a pattern of hills, stars, lotus, bridges and sea water.
The outer circle of the text area is located between the narrow green ring edge and the inner green area. It is green. The outer circle of the text area is evenly arranged with the Chinese traditional Chinese characters "People's Republic of China and Macao Special Administrative Region". The lower end of the characters is facing the center of the emblem. The lower part of the characters is evenly arranged with the \MACAU\ Portuguese area logo. The upper letters are facing the center of the micro-face. The Chinese characters are all distributed based on the central axis of the micro-face.
1. In the middle of the inner circle of the emblem, there is a color flower composed of three petals. The golden five-pointed star located above the flower is called the small five-pointed star. Each of the five-pointed stars is arranged in a left-right direction. The five-pointed stars are radially distributed with the center of the emblem as the center. The center of the micro-face is at the bottom corner.
4. Below the lotus is the blue bridge and the sea water with green and white alternating from near to far. The pattern of the regional microcircle is shown in Figure B1. 183
GB17655-1999
Administrative Region
Figure BI The regional emblem pattern of the Macao Special Administrative Region of the People's Republic of China Five, the general sizes of the regional microcircle are as follows: No. 1: diameter 100cm
No. 2: diameter 80cnt
No. 3: diameter 60cm.
When producing different sizes of micro-areas due to special needs, they shall be enlarged or reduced in proportion to the general scale 183
VI. Micro-area positioning diagram
360*/22
GB 176551999
Figure B2 Micro-area positioning diagram
VII. Chinese and Portuguese characters on the micro-area emblem
GB 176551999
People's Republic of China
Macao Special Administrative Region
People's Republic of China
Macao Special Administrative Region
Figure B3 Standard characters in Chinese on the micro-area emblem
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.