This standard specifies the equipment composition, requirements, working conditions, test and testing methods, inspection rules and marking, packaging, transportation and storage of the production line for glass bottling of non-gasified liquids. This standard is applicable to the production line for glass bottling of non-gasified alcoholic beverages, syrup beverages, milk beverages, fruit juice beverages, food seasonings, pesticide emulsions and other liquids. QB/T 1487-2005 Production line for glass bottling of non-gasified liquids QB/T1487-2005 Standard download decompression password: www.bzxz.net

Classification number: X99
Registration number: 16754-2005
Light Industry Standard of the People's Republic of Chinabzxz.net
OB/T14B7—2005
Replacement QB14R7—1992
Gas-free liquid glass botile filling production line
Issued on September 23, 2005
National Development and Reform Commission of the People's Republic of China Implemented on May 1, 2006
QB/T1487—2005
This standard amends QB/T1487-1992 for non-aerated liquid packaging production line 3. Compared with Q1487-1992, this standard has the following major changes: The name of the standard is changed to distinguish it from other packaging container production lines; the reference parts are adjusted and the latest version is adopted; the relevant documents are added, and the technical GB 1.1-20 00's regulations distinguish between the use of periodic and non-periodic uses: for the relevant provisions on leak-filling machines, the negative pressure full filling machine is modified to a gas-free glass bottle filling machine of all leak-filling types, and its qualified rate of delayed filling is increased by no less than -95%; the production efficiency is increased from no less than 80% to no less than 90%; the liquid loss rate is increased from no less than 1.2% to no less than 0.56: the viscosity cost is increased from no more than 1.5% to no more than 0.8%: the main equipment is increased to plastic capping machine, case punching cylinder, etc., and the automatic equipment is increased to add case filling machine, case sealing machine, printing machine, case conveyor, etc.
This standard is issued by China Light Industry Association
This standard is under the jurisdiction of National Technical Committee for Standardization of Industrial Machinery, and is drafted by Shandong Anzheng Light Industry Machinery Co., Ltd. The drafters of this standard are: Ji and Zhao Nian. This standard was first issued in April 1992 and revised for the first time. This standard replaces the original industry standard QT14871992 Non-gasified liquid packaging - Specification for non-gasified liquid glass bottle production line issued by the Ministry of Light Industry
QB/1487-2C05
The standard specifies the composition, requirements, working conditions, test and inspection methods, inspection and supervision rules and marking, packaging, transportation and storage of non-gasified liquid glass bottle production lines
This standard is applicable to the packaging of non-gasified liquor Glass bottling production line for liquid products such as soft drinks, syrups, special drinks, fruit juice drinks, food additives, pharmaceutical emulsions, etc. (hereinafter referred to as the "production line") 2 Normative referenced documents
The terms of the following documents become the clauses of this standard through the application of this standard. For any later referenced documents, all subsequent revisions (including errata) or revisions are not applicable to this standard. However, the latest versions of these documents may be used by the research teams that have reached an agreement on this standard. For undated references, the latest version applies to the ten standards. GR4544 Bottle
GB/T 1352t—1992
0B14803-13 Heart wave container break-type anti-theft information bottle GB16798 Food machine city safety
BT[7449—1998 Packaging glass container refining system bottle mouth size GB/T17876-1999
Makeup container with plastic anti-theft core
AR:T 0018-200
Packing container Portuguese wine bottle
(Q0/T3562500L French shaped bottle mouth white wine bottle Q/T3729-1999 glass container shaped bottle. 1 Size 3 Equipment composition
3.1 The production line includes the following necessary equipment or combined machines: a) Cleaning machine (bottle washing machine or bottle rinsing machine): b) Gas-free glass bottle filling machine:
Sealing machine (one of crown capping machine, anti-theft cap sealing machine, plastic sealing machine, corking machine). u)
3.2 Check the production conditions and requirements, and add the following auxiliary equipment: a) Drying machine:
Inspection machine:
Labeling machine;
Packing machine:
Sealing machine:
Inkjet printer;
Parts machine;
Bottle conveyor
Box machine:
Current equipment.
QR/116872005
4 Requirements
4.1 Production efficiency store 5 "9: Public production capacity. 4.2 Delivery and loading capacity is small, and its full table has no benefit to the loading capacity! Recover the relevant efficiency and add the relevant expansion standard, the price is small||tt ||13 The loss rate is not more than 3.5%.
4.4 No. is not more than 18%.
4.5 The above is the name of the design. Can be less than wht:
4. All the internal resources and pipes are connected according to the limit. According to the different properties of the liquid, the cleaning should be small and the corrosion should be small: heat-resistant materials. The liquid of the submersible card should comply with the provisions of GB16798
5 Working conditions
5.1 The factory should install the waste parts according to Q3.TS6:GR1594, RR/TD08-2000, or use the energy efficiency of the production line. The freight rate should be changed. The standard should be the real payment of the customer. The type inspection should use 500 yuan of non-tax 1. Micro bottle. 52 shares of virtual The specification contains QBT3729-[5.3 The grade of the broken specification shall comply with the provisions of G17491998. 5.4 The crown shape of the thermal light material BT: 3521 192 The width of the certificate signature station cover shall be 6B [1803-1993 specification extension, 5.5
Plastic anti-heat reduction benefit is in line with the individual (9/178% 1999 and is determined. ht
5. The water, medium, steam, etc. meet the various pre-conditions and continental test methods. 6 Test and test methods
0.1 The production rate is determined
three meet the requirements of the cow! "One-piece bucket, the production line tower is carried out after the belt and the nominal production capacity is combined, and the finished product is 1 piece. Take the H period 2 large harvest, safe and secure (Calculate the single cow production efficiency, should meet the point of 1.1. 10
Cow production system of the heart effect according to the measurement time:::
Determination time benefit teaching point: single pull light into
Look at the public family of the production line, "energy, single capital this small (h! Brush real-time market, single for small international ()
6.2 chain installation qualified rate determination
With the rate table connected to the first model of the tour installation machine selection product release: the irrational installation of the current test method test, connect the public) calculation and other installation rate, the result meets the requirements of 4.2: ×100
Eliminate the class change, %:
A control product shoot teaching, single production meaning release
South report number, DC is ground:
Day. 3 Determination of liquid loss
Q0/1487—2305
The liquid loss phenomenon within 2 hours is recorded. The number of qualified products in the reverse loading liquid level within this time is shown in the measurement and elimination plan. The total loss of the product is not in compliance with the setting of the measurement plan. Formula (3) is used to calculate the adjustment rate. In accordance with the provisions of 4.3, NPTE
filtration loss should be %, %:
installation fee position will be different from the teaching quantity: related position: installation nominal wear, single comfort is the middle age: (
sexual loading liquid This will not meet the liquid point of the product total print, single pad is the lifting of 21 liquid car cleaning responsibility, position is (
64 Bottle loss rate determination
record the total number of bottles and time in the production line that are almost the same, except for the two units with six space problems! , according to the public 1) calculation heat rate, should be in accordance with the provisions of 4.4
household refers to the total number of people per year, single stop for the heart: 6.5 energy consumption test
production in the nominal energy state, out of the degree of test table ten equipment indicators, according to the public confusion (5) calculation # Feng'an equipment load standard, the price of 4.5 of the plan W10x-
J one, two cost setting winter relative energy, the unit is dead time book tons: k [-- type equipment, sheep position thousand (
2 small large input production practice forget, single effect for the use of period of special capacity: position plan liter annual volume: p
filled with liquid home, single in order to find more than one liter (.) Inspection rules: Inspection classification: Production inspection is divided into factory inspection and type inspection. 2 Factory inspection Each unit and product quality should be inspected by the manufacturer according to the product standards and technical requirements of each unit. After the approval, the certificate can be issued! When the user requires the production line to be inspected, the water is used as the medium, and the inspection is carried out according to 4.1, 4.2, 4.3, 4.4. If there is no inspection, the product will not be sent: 7.3 Type inspection 7.3.1. The six types of inspections of the vehicle shall be completed and the production line shall be inspected. The inspection of the production line shall be carried out according to the requirements of the inspection. The inspection of the products shall be carried out according to the requirements of the inspection. The products shall be qualified if all the items of the type QH14872005
are qualified. If there are unqualified items, they shall be re-inspected. If they are still unqualified, it is determined that the batch of products will not pass the type inspection.
7.3.2 The state inspection can be carried out by the user.
7.3.3 The type inspection shall be carried out when the following conditions are met. During trial production and finalization of new products:
When there are significant changes in structure, materials and processes, which may affect the performance of the production line: b
When a comprehensive quality assessment of the production line is required: d
When there is a significant difference between the inspection results and the previous type inspection: The national quality supervision agency shall issue type inspection requirements according to B marking, packaging, transportation, purchase and storage
Each single machine that makes up the production line shall be marked, packaged, transported and stored in accordance with the product labels and relevant technical documents of each single machine.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.