This standard specifies the control type, position and control direction of common control devices for lawn and garden machinery. This standard applies to lawn and garden machinery. JB/T 6677.2-1993 Agricultural and forestry tractors and machinery, lawn and garden machinery Position and control method of control devices for lawn and garden machinery JB/T6677.2-1993 Standard download decompression password: www.bzxz.net

Machinery Industry Standard of the People's Republic of China
JB/T 6677.2-1993
Agricultural and forestry tractors and machinery, lawn and garden machinery-Control devices of lawn and garden machinery
Location and operation methods
1993-06-04 Issued
Ministry of Machinery Industry of the People's Republic of China
Implementation on 1994-01-01
Machinery Industry Standard of the People's Republic of China
Agricultural and forestry tractors and machinery, lawn and garden machinery-Control devices of lawn and garden machinery
Location and operation methods
JB/T 6677.21993
This standard equivalently adopts the international standard ISO3789.3-1989 "Location and operation methods of operator's controls for agricultural and forestry tractors and machinery, lawn and garden power machinery-Part 3: Control devices of lawn and garden power machinery". Subject content and scope of application
This standard specifies the control type, position and control direction (including the direction of action) of common control devices for lawn and garden machinery. This standard applies to lawn and garden machinery. Reference standards
JB/T6677.1 Position and control method of common control devices for agricultural and forestry tractors and machinery, lawn and garden machinery 3 Type, position and control method of control devices The type, position and control method of the control device for the driver of a seated machine are shown in Table 1, and the type, position and control method of the control device for a walk-behind machine are shown in Table 2.
Control device
Engine
Foot throttle
Hand throttle
Electric start flameout
Hand start flameout
Approved by the Ministry of Machinery Industry on 1993-06-04
Installation position
A position that the driver's right foot can quickly approach, preferably to the right of the brake pedal
Preferably installed in front of or to the right of the driver, and in a position that is convenient for the driver to operate
Easily accessible on the driver's seat Close position
Easily accessible position on the driver's seat
Operation method
The engine can only be started when the following conditions are met:
①The main transmission is in neutral or disengaged position
and the auxiliary transmission is also in neutral or disengaged position②The main clutch is disengaged
③The driver is sitting in the driver's seat
Step on the pedal forward or downward to increase the engine speed
The moving direction of the joystick is parallel to the longitudinal axis of the driven vehicle In the plane, the direction of movement should be away from the driver (usually forward or upward to increase engine speed)
The joystick should be able to remain in the off position without human power
1994-01-01Implementation
Control device
Service brake
Foot brake
Hand brake
Parking brake
Hand operation
Foot operation
Powertrain
High clutch
Foot operation|| tt||Hand control
Combination of driving speed and direction
Foot control (single pedal)
Foot control (double pedal)
Hand control
Gear selection
Linear control (hand control)
Non-linear control
Direction change control
(forward-reverse)
Clutch of matching device
Mower additional clutch
(hand control)
JB/T 6677.21993
Continued Table 1
Installation position
In front of the driver
The brake pedal should be located at a convenient position for the driver's right foot
At a convenient position for the driver
At a convenient position for the driver
At a convenient position for the driver
Convenient position for the driver's left foot
A position that is convenient for the driver to operate
According to the provisions of JB/T6677.1
Convenient position for the driver's right foot
According to the provisions of JB/T6677.1
According to the provisions of JB/T6677.1
According to the provisions of JB/T6677.1
According to the provisions of JB/T6677.1
Convenient position for the driver to operate
Operation method
When equipped with a steering wheel, clockwise rotation should make the vehicle turn right, counterclockwise rotation is for left turn brake pedal The direction of movement of the plate is generally forward or downward to engage the brake. When the wheeled tractor is equipped with brake pedals for left and right braking respectively, the brakes should be interlocked to prevent excessive deviation due to braking when driving in a straight line. Pulling action is preferred. When equipped with left and right independent hand-operated mechanisms, the brakes should be interlocked to prevent excessive deviation due to braking when driving in a straight line. When moving backward or upward, it is engaged. When the brake pedal is pressed down or forward, it is engaged. Pressing the pedal forward or downward disengages the clutch and moving backward disengages the clutch. Moving the outer pedal forward or downward should cause forward movement and increase the forward speed, and moving the inner pedal forward or downward should cause reverse movement and increase the reverse speed. Moving the joystick forward or upward is engaged. Moving the joystick backward or downward is disengaged. The engagement and disengagement of the cutter should be independent of the traction system. The directions of engagement and disengagement shall be clearly indicated by signs
Control device
Mower transmission clutch
Power output
Additional device
Foot control
Hand control
Control device
Engine
Electric start
Hand start
Electric start flameout
Hand start flameout
Clutch
Clutch
Hand control
Control direction
Single-stage type
Multi-stage type
JB/T 6677.21993
Continued Table 1
Installation position
The drive clutch release device of the lawn mower should be installed between the engine and the cutter. If the cutter is directly installed on the motor, the release device should be installed between the motor and the power supply (battery).
According to the provisions of JB/T6677.1
Position convenient for the driver to operate
Device convenient for the driver to operate
Installation position
The driver can only operate from the normal position
Position convenient for the driver to operate
Position convenient for the driver to operate
Position convenient for the driver to operate
Position convenient for the driver to operate
Position convenient for the driver to operate
Position convenient for the driver to operate
The movement direction of the front end of the control device is downward for descent, and upward for lifting. The direction of its movement should be clearly indicated by a sign
Moving the control device forward or downward is descent, and moving backward or upward is lifting. The direction of movement shall be clearly indicated by a signbZxz.net
Method of operation
Start by hand
Start by hand
Move the joystick forward to increase the engine speed
The joystick has a locking device to prevent accidental operation of the starting device
Move the joystick to the off position. The joystick should remain in the off position without any control. When the joystick is moved in the opposite direction of travel, the power is completely disconnected. When the joystick is moved forward, the power is temporarily disconnected
When reverse gear is engaged, reverse gear can only be engaged when the driver applies continuous pressure on the joystick. Moving the joystick forward or downward is forward movement. There should be a fixed neutral position
Moving the joystick backward or upward is reverse. There should be a fixed neutral position. When the joystick passes the neutral position, the operating force changes significantly.
Additional Notes:
JB/T6677.21993
This standard is proposed and managed by the China Agricultural Mechanization Science Research Institute of the Ministry of Machinery Industry. This standard is drafted by the China Agricultural Mechanization Science Research Institute and the Luoyang Tractor Research Institute. The main drafters of this standard are Chen Junbao, Pan Keqiu and Zhang Lan. The People's Republic of China
Mechanical Industry Standard
Agricultural and forestry tractors and machinery, lawn and garden machinery, lawn and garden machinery, operating devices, location and operating methods
JB/T 6677.21993
Published and distributed by the China Academy of Mechanical Science
Printed by the China Academy of Mechanical Science
(No. 2, Shouti South Road, Beijing
Postal Code 100044)
Format 880×12301/16
Printing Sheet 1/2Number of Words 6,000
First Edition December 1993
First Printing December 1993
Print Quantity 1-500
Price 3.00 yuan
Mechanical Industry Standard Service Network: http://www.JB.ac.cn66_99 /
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.