This standard specifies the general requirements, model composition and markings for the 300-ton segmented barges on the Yangtze River. This standard applies to segmented barges that sail on the middle and upper reaches of the Yangtze River and the V-class waterway of the water transport network that connects with it. GB/T 2884.7-1996 Yangtze River System Segmented Barge Model Standard Series - Segmented Barge Model Standards for 300-ton Segmented Barges on the Middle and Lower Reaches of the Yangtze River and the Water Transport Network GB/T2884.7-1996 Standard Download Decompression Password: www.bzxz.net

GB/T 2884.7—1996
This standard is a revision of GB 2884.7—81, and the main dimensions of the ship type have been changed. After the revision of this standard, the original GB2884.7—81 is abolished. The division of waterways in this standard is consistent with the requirements of GBJ139—90 Inland Waterway Standard. This standard is proposed by the Ministry of Communications of the People's Republic of China. This standard is under the jurisdiction of the National Inland Waterway Standardization Technical Committee: the drafting units of this standard; the Institute of Standards and Metrology of the Ministry of Communications, and the Yangtze River Ship Design Institute. The drafters of this standard: Liu Huiru, Xiang Zhizhong, Wang Feifei This standard was first issued on December 31, 1981. The Yangtze River Ship Design Institute is entrusted with the interpretation of this standard. 11
W.National Standard of the People's Republic of China
Yangtze River System Sectional Barge Type Dimensions
300-ton Sectional Barge Type Dimensions for the Changjiang River Main and Branch Direct Routes and Water Transport Network
Ilimenslon series of integrated barges for tbe changjlang waterway?-Elmeeslona of Integrated barges ter the direct transport tstmaln-branch routes of the middle-downstrean of the Changjliang and walerwky relwork-300DWT Model Drawing
GB/T 2884. 7-1996
Daishan GB 2684, B1
This standard specifies the general requirements, model design and marking of 300-ton-class long-distance section vessels. This standard is applicable to section vessels that operate in the middle and lower reaches of the Yangtze River and its connected waterway network. 2 Definition
This standard adopts the following definition.
Waterway network
Inland navigable waterways including the Yangtze River, Pearl River, Qiantang River, Huaihe River, Yellow River, Haihe River and other river systems (including the Beijing-Hangzhou-Yunnan River) connected by the Beijing-Kangzhou, Xiangyang, Ganyang, Zhenghuai and other canals.bzxz.net
3 Light requirements
3.1 Vessel type tonnage; 300 t.
3.2 General main dimensions: total length 35m, width 10.0m, draft 1.3~1.5m. 4 Model composition
The model consists of four parts. Wei
Table Roujun section ton report
\section\The first letter of the Chinese pinyin, indicating "section barge" "two" The first letter of the Chinese pinyin, indicating "water transport network" * "long" The first Chinese pinyin character, indicating "Yangtze River" Tidal Technical Supervision Bureau approved 1996-06-17 12
1997-01-01 implementation
W.5 standard
GB/T 2884.7-1996
5.1 Each barge section shall be provided with a signboard with the following contents: 8) YiBo model, factory serial number, standard number b) overall length, waterline length, double width, waterline, design draft, cut-off displacement c) manufacturer name 1
) year and month of construction.
5.2 The signboard is rectangular in shape, 330mm long and 200mm high, and is made of metal material (sound, device or other system). 13
W.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.