The recommended units specified in this standard are applicable to the expression of properties of paper, paperboard and pulp. This standard deals with the application of units of the International System of Units (SI) within the scope of paper, paperboard and pulp. GB/T 5032-2002 Units for expressing properties of paper, paperboard and pulp GB/T5032-2002 Standard download decompression password: www.bzxz.net

National Standard of the People's Republic of China
GB/T5032-2002
eIs5651:1989
Paper, paperboard and pulps Units for expressing properties20021015Promulgated
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
Implementation on April 1, 2003
GB/T5032—2002
Standard replaces GB/T32-1 Paper, paperboard and pulps Units for expressing properties. This standard is equivalent to SS155185\Units for expressing properties of paperboard and paperboard.
The standard units listed in Table 1 of the six standards are the energy units related to the current national standards in the field of papermaking industry. This time, the units with static national standards in 185 as the performance are added to Table 1. The appendix of this standard is the appendix of the standard.
The appendix B of the standard is the reminder:
The research and development of this standard (for reference only, the standard will be published from the month of implementation, and the China Light Industry Federation will submit the white paper: This standard is a small paper industry standardization technical committee. This standard is a small paper industry standardization technical committee. This standard is published by the China National Pulp and Paper Research Institute. This standard is published by the China National Pulp and Paper Research Institute. This standard is published by the China National Pulp and Paper Research Institute. This standard is published by the China National Pulp and Paper Research Institute. This standard is published by the China National Pulp and Paper Research Institute. This standard is published by the China National Pulp and Paper Research Institute. This standard is published by the China National Pulp and Paper Research Institute. This standard is published by the China National Pulp and Paper Research Institute. This standard is published by the China National Pulp and Paper Research Institute. This standard is published by the China National Pulp and Paper Research Institute. This standard is published by the China National Pulp and Paper Research Institute. This standard is published by the China National Pulp and Paper Research Institute. This standard is published by the China National Pulp and Paper Research Institute. 5C322002
International Organization for Standardization (ISO) International Standards Organization (ISO) (1) A joint meeting of international members of the International Organization for Standardization (ISO) for the preparation of standards. The International Organization for Standardization (ISO) is a joint international organization of national standards bodies. Each member of the ISO Technical Committee shall be entitled to participate in the work of the relevant international bodies, whether official or non-official, provided that they have a connection with the relevant international bodies and have the right to participate in the work. The International Organization for Standardization (ISO) is a joint international organization of national standards bodies, which shall be responsible for the preparation of standards by the relevant international bodies. The International Organization for Standardization (ISO) is a joint international organization of national standards bodies, which shall be responsible for the preparation of standards by the relevant international bodies, including the International Organization for Standardization (ISO). The International Organization for Standardization (ISO) is a joint international organization of national standards bodies, which shall be responsible for the preparation of standards by the relevant international bodies, including the International Organization for Standardization (ISO). The International Organization for Standardization (ISO) is a joint international organization of national standards bodies, which shall be responsible for the preparation of standards by the relevant international bodies, including the International Organization for Standardization (ISO). The International Organization for Standardization (ISO) is a joint international organization of national standards bodies, which shall be responsible for the preparation of standards by the relevant international bodies, including the International Organization for Standardization (ISO). The International Organization for Standardization (ISO) is a joint international organization of national standards bodies, which shall be responsible for the preparation of standards by the relevant international bodies, including the International Organization for Standardization (ISO). L
1 Scope
National Standard of the People's Republic of China
Units for expressing properties of paper, paperboard and pulps:-Units For ... 50322CC2
e1s05651:1989
代梦/15:32.165
The properties listed in Table 1 and the appendix of this standard should not be considered as a combination, and they can be used to accurately derive the corresponding units.
2 Recommended units
This standard can be used as an international standard (industry standard for small energy units, indicating the names of energy and quantity.
As long as it is practical, it should be adopted. In the rare case of a suitable S unit, other units other than
can be used. In most cases, it is recommended to use a single unit to express a given performance. In addition, the performance can be approximated within the scope of the complex range. If the range exceeds 1C:1, the special unit derived from the H with proprietary industry names should not be simplified to avoid confusion and ambiguity in the test principle. Table 1: National Standard 1 Industry Ladder > Item Date Unit Single Control Point
Column Control Point
s, , 3
Strong properties
(medium quality)
Length
Strong absorbency
Multiple properties (CSF and SR
Source density
Fiber length
Fiber ratio
Maximum pore size
Stretchability
Anti-turbidity
Anti-inductive guidance
The General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China approved the national standard for the treatment of bad reception on 2002-0-15! Difference number
Gk\ 4....
Gh5451.3.1F/ r517,Qh: 153
CR/T :51. 3
1 (H, 4r,?
Ch,T 3333.+R! :3U,tK1 12G2
Gh/1 1r42R,+*1 x678.
ET:eSEGh\2.TS.1
GH/1 2479. 12
GVT :S
GT 33GT 12611
G1/T 453.C15/F 13611
233401 implementation
. 1.4.3
Interruption time
Anti-account energy absorption
Industry energy absorption index
Heat change effect
Time Rongdian
Fangbao norm
Platform constant, with cardboard)
Unlock the position
, the hand industry is positive output Lan energy
And the new spring
Si Yi decides the new
Ping CMT)
Hengyuan orthodox promotion, not positive promotion
Two properties
Red quota (this technology)
Rough quality (can be found in the table
Ping norm:
Printing and binding network strong
Zhou Guangyang Lin
Comply with the gas "absorption energy
Water natural gas invites the book||tt| |Water-based
measured by facial cream
measured by pressure
long certificate liquid height
blue stock capital
GR/T5032—2DC2
table continued)
inferred year or
indicated square
Jin\.anJ.m?
tN+*+D.pN+m
kgdouble number)
countable
N·mi/g
piece m,
armkg·piece/k
nn*/m4
mm/min.mm'x;s/n:o.
standard support door core model standard) elimination number
GB/T 453,GB/T 1231:
GBT 2914
GB.T 455.1.B/T155.2
1+KT -I... I,GH/T +.- 2
GB/T 454.CB:T -R5.1.CB/T 15s91r$/T 1..CB/E 1135
PrT 654R
Gk:T 8942
GB:T 257.3
SB:T:2000
: GB:T 437.GRT 26S.E.GB: 1ES8GRT 457.GE 2679. =
(15/T 457.CB 2675. 5
GB:T 2679. 3
GDET 20?3. 17,G/1 55*6
G1/T 2373, 1C,GL/: 26TE. H
GUAT 2372.1C.GB/ 26T9. X
G/I2679.4
GD:T 2TE
GB/= 1:.6
GH/T u7-J5.tT 2179.16
1+RTM,CL137
t:h:xll.adrKT:c
GR PETEY
GEF154F
GPT ..L.2
GB:T 407,I:T 458,Gh/1 287.13.QD=1461
Transparency
Stretchability
Comparative academic performance
A total of scientific research
Reflective reason
"Pool absorption this black effect
Light fee needs to be viewed
, do not use (use!
Free (mouth)
Technical analysis (after formation of absolute F substances)
Eastern analysis content
Store drinking safety composition
Sichuan's first sale of the reasons for the people
Remove wood from the tips
#Youjie
Electrical performance
GB/I60322002
Table ()
Derived academic section salt staining
Expressed as secretion
Improved value
I gahg
with the same axiom to reduce the dynamics of industry
R, 406
RT 3:5.GR* 46n
GR/T3O1
GB/T BS11. [CB/T 8041.2.
GBT 6S-I.:
Gh:1esap
GH!1EA3+N 26T9,1
ih/I $l2t. I.t+H/I Kulu,$,:KT +4?GRT :0EH/T +1,RI - :
T:E3.G712frT297.\
GB:T +43. CB/TH, CB/T 745
tB/T/GB/S/4.01/T 20.5.
GBT 2t77. E.GB/T 2FT7.6
(L/T 2/..CB/- 27.13.
GHT 2678. 3,U3/F SC1,4,BT 6.GB/.G:I1.1.CB/[2
GB:T J233:
P/T 797GBT 3S-3.2
th ai?$. 1.Ghy. k:1:.2.
GRIS..GEYF.2
:HF67.G2ET.t
GB:T 12S5E
GHT 15:?
GBTJ333
Cn/I 29!.I,GB/T $:.E
1 6:5/t 156
3- 3- 3
2- 4-
Performance performance room
Quality consumption plus: test low,: for paper falling) all
electric point electric paper
special blue sticky position
total maintenance money
through law speed
CHT 5032—2002
Table 1 light)
recommended unit or
indicated by the association
group coordination (industry standard) number
GE/T 353,GE:T 12555
G1/T 3333,GB/T 12555
G/T 3334,G11 1427:
GR/T 797G,G/ T973
G3T12657
GB/T ISAG. .
G3/T 1b15. -
GD-T I:2x.GD/I .....?
GH/ 51X
GB/5037-207
(Appendix of the standard)
Recommended units for other properties
Some properties have not yet become national standards), but are now listed in Table A1 as standard sheets that represent sufficient properties. A1 also includes these common systems, test methods for paper inspection and pulp, and sheets that are often used as examples in international technical exchanges. Table 1 The unit of its properties is not certain. 2. The performance of strong azoles is transparent. The volume of water is the component of water. Its nominal quantity is the length of optical "fluid system"
Tension
Pressure, store force
Engine unit or power
manst/sg
Select the appropriate unit
, numerical value
g/uug/kg
.utuuuu.m.lm
Her.gg-ky.1
mm\.\m\..m\..n
rua-en',drt'.m'x rml..f.
Pa.kP:.Ps
GB/T 5032—2002
Table A15 complete)
Rotate the car
Below the angle
Linear dynamic mountain
3 *--s
Law single convex or representation method
(with center number division)
GR/T5032—2002
Ah green B
(prompt attachment)
About frequency, group board and dragonfly pulp test method national final inspection standard catalogue special fund science (the following all standards will be effective, in order to use the various forces of this standard maintenance should use the following dead standard as much as possible the latest version:) G451.-1999 and paperboard size and offset compensation determination GT 431.2 -1989
Determination of grade and jump length
GB/T 4:1.7-1S89
Determination of paper and effective cabinet
45315 embedded analysis jump sensitive tensile strength standard Xie method constant speed simple method) GB/T 4E4-:U9!
Determination of paper front thickness
GR/T 45-+1 -19F9
General method for paper tear resistance
GT 4.2-:S89
Determination of paper
Determination of paper and effective flat coupon seat! Buick method 198
GB/T 467-1U8
G1/1 458-1589
GH)T 460
Method for determination of paper folding degree
Method for determination of transparency of paperboard (Schober method)Determination of shrinkage resistance
Method for determination of degree of shrinkage of paper and paperboard (ink streaking method) 15N5
GB,T 461. [--1SES
G/1 461.2- 1589
GB/T A1.:
GB/1 462-138
GB/T 4R3..ISSS
Method for determination of the absorptivity of the gross fiber of paperboard (Miller method)Determination of the surface absorptivity of paper and paperboard
Method for determination of shrinkage of paper and paperboard (condensation method)Determination of moisture content of paper and paperboard
Method for determination of the moisture content of paper and paperboard
G/T 464. 1 15H9
G37T 465.1-
GB/T 465.2--1S89
G/T 741-1585
GB/T742
GR/E 743
GB/T 746—1980
GBT746
：965
G1/1'747—1923
Paper and paper - Accelerated thermal aging method for 2272
grade and standard board - Method for accelerated thermal aging of 129-2 or 15021 grade and standard board - Method for determination of tensile strength of paper pulp after exposure to water for a specified period of time Determination of released water
Determination of pulp content
Determination of molten extract of pulp
Determination of redness of paper
Determination of the chain length of pulp
Determination of the wood content of bleached chemical pulp
Determination of the thickness of paper ... 151U
G/I1541
GB/T1h18—1989
Determination of water absorption of paper-based panels (Bo method
Determination of water absorption of paper-based panels and paperboards
Determination of opacity (paper backing)
Determination of acidity or change of water-tightened liquids for paper-based panels and paper GRT 1545.1-1939
GB/T :513.2 1939
Determination of FH of paper pulling and papermaking wood extraction liquid G15461983 Method for determination of kappa value of paper charcoal
:B/517-[389 Method for determination of acid value of paper and papermaking paper GB/T 5032.2002
G5,1548158% Determination of adhesive strength
GT/T2677.1-1SS, silver raw material analysis test rod collection determination of water tooth of papermaking material
GB/T 2G77.2 1993
GE/T 2677. 5-103
G/126.4155
GB:1 2677.:1SS3
GH/1 2677.61$$4
GB/ 1 2677. *—1994
G3/T 2677.Q--1994
G3.T 2R77.1015N5
Determination of ash content in clean raw materials
Determination of water extract content in papermaking raw materials
Determination of 1% tantalum extract content in papermaking raw materialsDetermination of organic solvent iodine content in papermaking raw materialsDetermination of acid and alkali content in papermaking raw materialsDetermination of cellulose content in papermaking raw materialsDetermination of pulp cross-linking
GBTS6r611SS3
GB7T 2678-3—1SS4
G4/T 2678. 3 -1555
G3/T 2678. 1-.1994
GE/T S3A.E1S96
GB/J 2h7k. 6-- 1596
Energy pulp, paper and paperboard-Determination of water-soluble fluoride content (acid recording method)Determination of oxygen content of pulp (deoxyribonucleic acid)Determination of sheeting of non-woven fabrics
Paper, yarn and paperboard-Determination of water-soluble acid pad content (conductometric titration)/36r.1-1593
Determination of transparency
G3/T 2670, 2- 1SS5
GH1 2679.3 155e
GB/1 2679. 4-.551
Gl/T 26'9.-1995
GE/T XS ISSG
G,T 2679. 7-1987
GB/ 217. K-- 1555
G11T 2676.5--993
GB/T 2479. 10
Determination of the formaldehyde content and folding rate of paper and paperboard
Determination of the temperature of paper and paperboard
Bentcow twist chain method! Determination of folding resistance of paper and board (MTT folding resistance determination method for paper and board ring pressure determination method for board box printing)_93
G1/1 2679.13—:U96
GE/T 2 14
G/1 2679. 1E—1597
GB/T 2676. :6
GT267S.17—1097
GB/T HH82
GH/T 3333- 999
G157T 4688-1332
G/T 541--13*3
GB/T 5131
GE/T5492
G71 3407—185
611 54031985
GRT 6:
LH/T $54S
Determination of shrinkage strength of Japanese paper
Determination of air permeability of Japanese paperboard (medium range) Special Bull method for leaking paper and paper maximum pore lightness
Determination of the strength of Japanese paperboard
Determination of printing surface strength of paper and paperboard (or elastic acceleration method) Determination of mechanical loss energy plate strength (Dawei external strength method) Determination of charging pressure (Xiao Bodong-Duan Gaiwei method: Standard paper two-standard mountain wear electrical test Wanda
Standard paper Quality cut (electrical method) paper quality determination method
paper density determination method
paper price determination
paper economical determination
paper and board plastic gas determination
sizing selection method
oil permeability determination
paper breaking strength determination method
pressing plate thickness determination method
Gb/1 3547-1998
GB/T 55-8-IU8
GR/T $$73—1987
GB/T 797:1987
GB/T 7375-1987
CB/T :37S 1987
GR/7 7877—987
GB/T797S
G3/: 7974—1087
GR/T 5032—2002
Determination of relative strength of paper
Determination of adhesive strength of tile board
Determination of the time factor of pulp, grade and resistance to ironing (infrared/vertical method) Paper and paperboard
Determination of whiteness (intensity vertical position)bZxz.net
Determination of color of paper and paper machine (intensity/multiplication point method) Insulating paper and paperboard Determination of water absorption rate of liquid electrophoresis of pulp, paper and paper Determination of carbon content of paper
Determination of dihydrogen ethane extract
GB/T 8940.1-1988
Short-term determination of paper and paper by reflection method GRT 390. 2—1R
GR/T 8941. 1
G2: 8941.2—1068
GB/T 8941.3—1988
Test method for pulp
Test method for low specular elasticity of paper
Test method for 2-angle test of paper and paperboardTest method for 5-angle test of specular selectivity of paper and paperboardTest method for 75-angle test of specular selectivity of paper and paperboardTest method for 8948. 2—10ks
GBT 843.3
G/T 894X,4
GB/T 8941
(i13/J 8944. 3—19NN
GE/7 10356—1589
GB/T 1337
GE/T IOSS8
CB/T [0539--1525
(/T 10540—1989
GB/T 107.10
GB/J107411580
GB/T 1042
G4/112033—_989
GH/T12GST
GE/T 12657—1990
GB/T 12653—J930
G3/T 1966J—1990
(G13/T12G6)
GK/[ _2939
GB:T -2D10—I!1
G/T 2911199F
G/T1291
GB:T 13523
：1992
GB/T 1/217—1003
QR/1 14S1--1992
QR/T 181M
Paper case, paper cabinet
Pulp, paper rod, paper drawer
Pulp, paper board
Paper red and new board
Determination of energy content
Determination of maximum iron content
Determination of appropriate content
Determination of calcium and iron content
Determination of bulk sales Part 1: Pulp board and paper pulp
Determination of bulk platinum quality Part 2, pulp (rapid drying case) Determination of the exact length of pulp bale
Determination of acid content in papermaking raw materials and pulps Determination of base content of pulp
Determination of light scattering and light absorption coefficient of paper red pulp Determination of filtration rate of paperboard
Determination of dust expansion of pulp
Lack of pulp Determination of the content of extruded materials
Determination of the content of pectin in soft raw materials
Determination of the content of cellulose in raw materials and pulp by gas chromatography
Determination of the content of potassium and sodium in pulp, paper and paperboard
Determination of the content of water in pulp, paper and paperboard
Determination of the total content of cobalt oxide in paper and paperboard
Determination of the oil pressure absorption of paper and paperboard
Determination of the tensile strength of paper and paperboard
Determination of the pH value of paper and paperboard
Determination of the number of paper quality damage in the machine (t product>Determination of the air permeability
Determination of the firmness of paper
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.