JB/T 53228-1999 Product quality classification of stand-up pouch forming-filling-sealing machines JB/T53228-1999 Standard download decompression password: www.bzxz.net
Some standard content:
Machinery Industry Standard of the People's Republic of China JB/T53228-1999 Stand-up Pouch Forming-Filling-Sealing Machine Product Quality Classification (Internal Use) Published on 1999-12-30 National Bureau of Machinery Industry Implemented on 2000-06-01 JB/T53228-1999 This standard is a revision of JB/T53228-94 "Stand-up Pouch Forming-Filling-Sealing Machine Product Quality Classification". During the revision, the original standard was edited, and the main technical content remained unchanged. This standard replaces JB/T53228-94 from the date of implementation. This standard was proposed and managed by the Packaging Machinery Standardization Subcommittee of the National Packaging Standardization Technical Committee. The responsible drafting units of this standard are: Hefei General Machinery Research Institute and Jinzhou Packaging Machinery Factory. The main drafters of this standard are Wu Defu and Hu Deyin. I Machinery Industry Standard of the People's Republic of China Stand-up Pouch Forming-Filling-Sealing Machine Product Quality Grading (Internal Use) JB/T53228-1999 Replaces JB/T53228-94 This standard specifies the quality grade, test method, sampling and evaluation method of stand-up pouch forming-filling-sealing machines with a packaging capacity not exceeding 1500mL. This standard applies to stand-up pouch forming-filling-sealing machines (hereinafter referred to as packaging machines) specified in JB/7549.4-1994 "Stand-up Pouch Forming-Filling-Sealing Machines". Cited Standards The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard was published, the versions shown were all valid. All standards are subject to revision, and parties using this standard should explore the possibility of using the latest version of the following standards. JB/T7549.4—1994 Stand-up bag forming-filling-sealing machine Product quality grade Packing machine products are divided into three grades: qualified products, first-class products and superior products according to their quality level and use value. In addition to complying with the provisions of JB/T7549.4, the assessment items and index requirements of each grade of packaging machine products should also be as specified in Table 1. Table 1 Assessment items Deviation of heat sealing part temperature from the set value Bag length control deviation 1) Availability A Working noise of the whole machine Qualification rate of packaged finished products Qualification rate of main items of main parts Qualification rate of key items of main parts 1) This item is not tested for packaging machines using color code positioning. The test method Perform according to the test method specified in JB/T7549.4. Approved by the State Machinery Industry Bureau on December 30, 1999Qualified products Product quality grade index Superior products ≥ 95 Implemented on June 1, 2000 5 Sampling and evaluation methods 5.1 Sampling method JB/T53228-1999 5.1.1 Random sampling is adopted for sampling, which can be drawn from the production plant, user or sales department. The taken out packaging machine must be sealed. The sampling method shall be in accordance with the provisions of 6.2.3 of JB/T7549.4-1994. 5.1.2 In principle, the inspection of the main parts of the packaging machine must be carried out by disassembling the whole machine to be sampled. If some parts are not convenient to disassemble, random sampling is allowed from the qualified main parts in storage. 5.1.3 Inspection of main items of main parts: The main items of main parts shall be determined by the manufacturer according to the specific conditions of the parts. The total number of items shall not exceed 100. During sampling, two items of each main part shall be randomly selected from the qualified parts in storage. Evaluation method According to the grade requirements specified in Chapter 3, the actual measured results of all project indicators are met, or the grade is determined according to the lowest indicator achieved. 2 People's Republic of China Mechanical Industry Standard Stand-up Pouch Forming-Filling-Sealing Machine Product Quality Grading (Internal Use) JB/T53228-1999bZxz.net Published and Distributed by the Mechanical Science Research Institute Printed by the Mechanical Science Research Institute (No. 2 Shouti South Road, Beijing Postal Code 100044)| |tt||Printing sheet 1/2 Number of words 6000 Format 880×1230 First edition in May 2000 First printing in May 2000 Price 10.00 yuan Printing quantity 1-500 No. 99-1684 Mechanical Industry Standard Service Network: http:/wwwJB.ac.cn6668 Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.