GB/T 3755.2-1983 Compression-type tapered thread butt joint body
Basic Information
Standard ID:
GB/T 3755.2-1983
Standard Name: Compression-type tapered thread butt joint body
Chinese Name:
卡套式锥螺纹对接直通接头体
Standard category:National Standard (GB)
state:Abolished
Date of Release1983-06-17
Date of Implementation:1984-04-01
Date of Expiration:2008-11-01
standard classification number
Standard ICS number:21.060.60;
Standard Classification Number:Machinery>>General Parts>>J15 Pipe Accessories
Publication information
publishing house:China Standards Press
Publication date:1984-04-01
other information
Release date:1983-06-17
Review date:2004-10-14
Drafting unit:Standardization Institute of the Ministry of Machinery Industry
Focal point unit:National Technical Committee for Standardization of Pipe Accessories
Publishing department:China Machinery Industry Federation
competent authority:China Machinery Industry Federation
Introduction to standards:
GB/T 3755.2-1983 Compression sleeve type tapered thread butt joint body GB/T3755.2-1983 standard download decompression password: www.bzxz.net
Some standard content:
(Bar)
GB3755.2—83
Note: The weight is the calculated value, and the specific gravity is 17.85kg/dm. The technical conditions shall be in accordance with the provisions of GB3765-83. t
M10×1
M12×1.25
M30×2
M33×2bZxz.net
M36×2
M42×2
M45×2
M48×2
M52×2
Additional Note:
This standard is proposed by the Ministry of Machinery Industry of the People's Republic of China and is under the jurisdiction of the Standardization Research Institute of the Ministry of Machinery Industry. 15
(kg/100 pieces)
This standard was drafted by the Standardization Research Institute of the Ministry of Machinery Industry, and was drafted by Shenyang Heavy Machinery Plant, Chongqing Heavy Automobile Research Institute, Dalian Modular Machine Tool Research Institute, Zhejiang Haiyan County Pipe Fittings Factory, Shanghai No. 1 Mechanical and Electrical Bureau Science and Technology Information Institute, and the 708th Institute of the Ministry of Aerospace. The main drafters of this standard are Hu Yusheng, Liu Dequan, Cheng Zhenshi, and Wang Muqin.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.