Some standard content:
1s 97.060
Classification number: Y license
Service case number: 14339-2004
Light Industry Standard of the People's Republic of China
QB/T 23232004
Generation B/T232!1907
Industrial washing machine
Industrialwashcer-extractors2004-08-15 issued
National Development and Reform Commission of the People's Republic of China2005-01-0 implemented
QB/T23232CC4
The standard is B2323-1947 installed capacity of floating machines with more than one ton of dynamic terminology, and it has tested 5014721:19071 sinking machine safety requirements part 1, and extended the full fee requirements of S10472-2:1997 industrial washing machine city safety consultation part 2: labor and legal requirements for small machines and 3 actual items.
This standard is issued by China Light Industry Federation of Six Products
This standard is the responsibility of the National Service Standard Science and Technology Integration Committee: HNA Limited Company
The main drafter of the wood standard: Gong Yiping.
This standard was formulated in the late 1989 as the bed professional cup standard B/TY99015-1989 clothing industry certification, the 1997 car law you set
as L industry Q/12327-1997, and the second light law. From the beginning of the agricultural heat 1 standard, the national standard: the national scientific and technological integration point: the national standard B23231997 and clothing industry.
YYY KANT KAa
OH/T 2323-200
1 solid
Industrial washing machine
This standard strictly abides by 1 industry selection of washing machine terms, product classification, cost, risk, inspection and small guide, installation, selection, sequence
8 industrial washing machine: development and network production of washing machines and network equipment 2 standard reference documents
The following terms and conditions are specified in this standard. Note: the text, the pressure of all customers fighting the heart of the big bio-quality station is the heart of the share) or the center of the plan, the signing of the market, the most dynamic according to the method of this registration you into the industry to determine the new text: use the text, level can be used.
19-2000 package drawing
GB.T3785-level: 1 performance test method
428800 home
5226.1-1996 plug-in gas equipment, etc.: points: general conditions 6388-986 shooting female release name
GBT131711997
the technology and definition
the following terms are used in full support "not real level
industrial washing machine
false Jiang limited washing Luo source operation The gift
sinking and dehydrating machine
and the steam washing and water-saving machine. 4.3
Fully automatic washing and dehydrating machine
In addition to the textile industry, let the requirements, heat, washing, speed production and dehydrating eight other learning control systems connected smoothly with the door dynamic machine.
Ordinary washing and dehydrating machine
In addition to the textile industry, water inlet, step-by-step, warp falling, floating sofa water learning center making a machine 3.5
Floating washing machine
External simple fixed door full core continuous performance temperature system on the case transfer nuclear law light dehydrating small 3.6
Fixed washing machine
External simple fixed installation bracket requires ten selection machines: 3. 7
Maichang: a container that is integrated into a whole and rotates inside it. Tumbler (inner part)
In the test cage of the paint flow test, the rated washing capacity of the material is installed.
QR:T2323-2004
Under the actual working conditions, it can be used to make the material (or water>) under the maximum load. It refers to the material stored in the natural state before washing. The water content does not exceed!
Narrow Qi equipment operation ratio
The net volume of the washing machine and the rated flow abandonment inspection, can be expressed by: 4 Product classification
4.1 Classification
4.11 Automation degree classification
a) Door type (printed Chinese character "Q\" indicates) b) General type (inverted spelling "P" indicates, can also be expressed by not) 4.1.? According to structural composition
) type (not indicated)
good type no ""
413 According to heating method or classification
a) hot steam point heat (without letter "\" indicated):) no special letter "D\".
4.2 Marking
1 Flow cabinet automatic washing and dehydrating machine model is composed of control letter and network control number, its actual meaning is: 1
1-"SX" is T industry, "SXT" is washing water number: 2-fuel type: transfer first content! (Food leftovers!, out of the heart to teach the old, the position is open ()? A structural type: Table 4.1.2, said; 4
A heating method: according to 4.1.3 table:
White dynamic north degree, double 4.1.1 table small;
Improved design market guide.
Similar 1: SX[S00FZQ table small abandoned for K information type steam heating full dynamic washing machine. Small model:, 0. said rate is 150 steam camp back through type industrial washing machine 5 requirements
5.1 use environment
a) South years over 3000m:
ITKAONYKAa
(R/T 2323-2004
h) is more ambient temperature of 0 ~ seven;
when the temperature is 25 ℃, the relative density of air is not more than 95%. 5.2 Safety requirements
The safety of paint washing and dehydrating machine should meet the requirements of GT5226.1-16. 5.2.1
The insulation of the charged body should not be less than 2M. 5.2.2 The electrical strength test of the original body in the book must be 1, and no flashover or mountain penetration phenomenon should occur. Grounding protection performance
The machine should be equipped with a terminal, with a grounding mark: the grounding resistance is not large 012:
The grounding is made of yellow or a certain material, the true diameter is determined according to the table: Table
The battery T/A
:> 32 40
According to the grounding conductor, the surface color of the material should be yellow and brown, 5.2.4 Protection device
The short-circuit protection device, over-current or overheating protection device 52.5 The machine should adapt to the requirements of voltage fluctuations when the power is excited in the color (110 range), and the virtual energy can be installed. 5.2.6 The noise
The relative noise level during washing and dehydration should not be greater than the provisions of Table 2. 2
5.3 Performance indicators
5. 3. 1 Moisture content
Cooling diameter/m
Product grade A
Washing and dehydrating machine, after being hydrated, its moisture content is not subject to the provisions of Table 3, Table 3
Station scanning form
5. 3. 2 vibration
moisture content \
device does not select the fall and the process of the fall, the maximum value of the moving speed should not exceed 7.1mm/3
5.3.3 liquid level control
the liquid level control device of the door dynamic flow Yue bearing machine is designed to control the action of the study of the Sichuan belt 9.3.4 operation test
the machine runs alone: safe: start and I stable, no other phenomena 5.3.5 hot water time
the machine lifts the rated rate of flow, and its discharge time does not exceed the current limit of this 4. Table 4
full self-cleaning.
general type method
5.3.6 heating time
the machine lifts the rated actual amount of micro-dyeing, and its heating time does not exceed the standard of Table 5 G
G-: 50
5.3. The instrument
can be turned to indicate the actual and sensitive degree:
5.3.8 Washing degree: allow.1 training under
method to conduct the test process
a: Shenzhen factory standard dyed fabric test popularity risk person one 35 fire: attached
QB/12323-2002
Ju(al rin
photography method fiber after production of friends virtual return Er test what note stain, small fabric no essential 53 months mechanical damage
lockable washing machine should be independent of the light fall, hair: light main bar damage must not be corrected 5.3.10 can workwwW.bzxz.Net
5. 3. 13. 1 Electricity can be set to wash each total fabric, electricity difference is not a person, 6 flash fixed, washing deep type such as steam dehydration power. The original learning management large power original general power Yue small equipment learning: other adhesive equipment consumption, such as fixed electricity non-amount. 5. 3. 10.2 Water type per thousand point stimulus, its water control should be individual 25YYY KANT KAa electric i/kw-h/kg:
QR/T23237CC4
5.3.10.3 Steam
The whole washing machine shall be washed for every gram of fabric! Steam consumption shall not be less than 9k54.
5.4.1 The customer shall be 10.
5.4.2 The machine structure shall be sufficient, and the high-precision system shall not be used for long-term dynamic operation. The material of the machine ... 5.4.4 Machine with special steam heat: the total display of the product: a dynamic product manufacturing type, and the product card with the use of the product: "the pressure indicator should be installed in the obvious place outside the steam main pipeline and the whole device: 5.4.5 Machine sweep, connection, light range, wait for loose, authorized place shall not be any more than 55 appearance and assembly requirements
5.5. Plated parts
machine evil! The silver show in the report is in the store, special mountain this is equal, there can be no customer, light certificate, gas welcome, flow, point, material year.
5.5.2 Black oxidation bucket
on the black gas can not induce the clock, flower average, division method, etc. 5.5.3 Continental rate parts micro spray paint cattle need to be comprehensive parts of the total rate of the material, no paint bottom exposure, cause wrinkles, gas measurement, Flow, double waves, etc.
5.54 Nameplate and logo
! The non-product machinery of Ji brand production Guzhou is in good condition, and the logo is in good condition, and there are no scratches, cracks, etc.! The small pipe on the device or the pipe of the Qingshan production equipment is in good condition, and there is no plastic or peeling phenomenon.
5.5.5 In this inspection, the movement is old, and there are no abnormal phenomena. 5.5.6 The production position of each coupon diagram , the car can be around the ticket, Yuansong must be home. 5.5.7 The door will not have its annual note joints should not have the phenomenon of adding. 6 Test method
8.1 Test conditions and test instruments and meters
611 Test conditions
a Micrometer training field 1 harmful interference from the outside world: 1): The test method is carried out in the local age, and the temperature of the product environment is within 15~15 meters. The wind pool is not within 0.4MPu.7MP: the required heat steam force is within 0.2MPa-0.4Ma(.6MPa, the air is within 0.4Ma(.6MPa)
6.12 Test instruments or meters
Test and supervision factory discussion of the standard micrometer industry
6.2 Safety performance
6. 2. 1 Range resistance
Under normal conditions, use a V megohmmeter to measure the resistance between the charged body and the degraded metal layer of the machine. The insulation is non-thermal. 5.2.1H period
6.22 Electric strength
The tester is used for the core of the machine with a strong wave, 150V (1mA not more than 1h
QB/12523 --2004
250V or T voltage is twice the rated voltage period 1000V (voltage is greater than 250V, lasting 1mim electrical test: starting, except for engineers and transformers, it should meet the requirements of 5.22.
meter name
single-phase watt-hour meter
steam flow reform:
measurement type
insulated core in
planning method
non-electrical
current core flow test instrument
grounding protection performance
Gm--g999n
I[Type 1.
D.3m.n/g.-. mn/s
3 rJ vS
25A. 0. In
0rA20m4
±IC, ±
【Measurement port grounding resistance, shall comply with the standards of 5.2.3, c, d) a
0. 1 MPa--1.6 MPa:
GB/T3T5
b) Use an equalizing meter to measure the grounding resistance between the grounded and the exposed non-metallic conductor, which shall meet the requirements of 5.2.3b). 6.2.4 Protection device
Each main part of the control system shall be equipped with circuit protection, over-current protection or over-current protection device, which shall meet the requirements of 2.4. The voltage fluctuation of 625V can be verified without changing the power supply voltage. The machine shall meet the requirements of 5.2.5 when it is running at rated DC +10. 6.2.8 Sound barrier
Three normal rated coating pre-sequence by the middle, the railway and the center, the use of grade calculation business 1.2m, fill the machine less shape only inch center then, from the machine wheel which 1, respectively into chaos and, down, open, no flash point suction straight, take the arithmetic average color as the machine! Compensation, consider compliance with 5.2.6 regulations:
6.3 Performance
6.3.1 Fabric refers to the moisture content
Attached A (normative appendix] A2, take 1.2 times the rated selected paint weight of the tested machine, put it into the drying machine for drying T: 30:30:30, until the adjacent two weighing values change no more than 1 road, immediately take out the income column, walk the red clothes on the mother pastoral fabric wash off, the weight plate is insufficient to show the excessive part with a napkin to adjust, and Carry out a 5m drift, and then immediately start the weight when the moisture content is calculated using the formula ([), taking into account the implementation of the 5.3. "standard. YYYKANTKAa
QB/T2323-2CC4
7-1 Water content: %
After the test fabric is tested, the direct current of the fabric is: kg
Gtx100
- Under the test supervision, the fabric is tested and measured after burning, 6. 3. 2 Vibration performance
The model machine is in the state of color, and after the washing and dehydration are stable, the machine is tested with the correct matching and industry standard 53.2.
6.3.3 Level control
Visually inspect the full-automatic washing and dehydrating machine during the rated washing process. The liquid level control device meets the requirements of 5.3.3. 6.3.4 Operation
Day test: simulate the selected cycle, and manually operate each time. It should meet the requirements of 5.3.4. Single test: The whole washing station will be tested with the specified washing equipment and white flash. Inspection: The machine shall be tested for 11 consecutive times without any reason. During the machine test, the machine shall be tested for 5 consecutive times without any reason. The machine shall comply with the provisions of 5.3.4. 6.3.5 Drainage time
When the machine is in the state of human input, after the rated rinse water is injected, the timer is used to measure the time from the beginning of the water mixing to the water flowing to the normal state. The machine shall comply with the provisions of 5.3.5. 6.3.6 Heating time
When the machine is under the effective cleaning degree (the center line of the optical inspection language is determined), the water temperature rises by 60K, and the time required for the measurement shall not be greater than the provisions of 5.3.6.
6.3.7 Only the table
The table during the washing process shall comply with the provisions of 5.3.7. 6.3.8 Cleaning rate
Company) According to the test method given in Appendix A, the cleaning rate shall comply with the provisions of 5.3.8:! Plan method. Select four pairs of fabrics with basically the same degree of dirtiness and mark them. Wash one of the four pairs normally and compare the cleaning effect.
6.3.9 Mechanical damage
After the test in 6.3.4 is completed, the fabrics should be tested in accordance with 5.3.6.3.10 Energy
When the machine is under rated conditions, use a single-phase or electric meter, a current gauge, and a water timer to measure the time and record the operation of the program set in A.3.2. The amount of water, water and steam consumed by the water temperature rise (602)K shall be calculated according to the formula (2), formula (3), and formula (4). The results shall be determined. G.3.10.1 Calculation of power consumption
D-The amount of power consumed by washing dry grams,54 Nameplate and logo
! The nameplate and logo of the non-product machine of Jizhou are not in good condition, and the logo is not in good condition. There are no scratches, cracks, etc. on the machine. The pipe on the machine or the pipe of the Qingshan machine is in good condition, and there is no plastic or peeling phenomenon.
5.5.5 In this inspection, the machine is in good condition, and there are no abnormal phenomena. 5.5.6 The machine is in good condition, and the machine is in good condition. 5.5.7 The machine is in good condition, and there is no addition phenomenon at the joint. 6 Test method
8.1 Test conditions and test instruments and meters
6.11 Test conditions
a Micrometer is used for testing. The test site is located in a place away from the environment or in a convenient place. The temperature of the environment is within 15~15℃. The required heat power of the water is within 0.4MPa and the air is within 0.2MPa. The temperature of the air is within 0.4MPa and 0.6MPa. 6.12 Test instruments and meters
6.2 Safety performance
6. 2. 1. Under normal conditions, use a V megohmmeter to measure the resistance between the charged body and the metal layer of the machine. 5.2.1H period. 6.22. Electric strength. The tester needs to test the core of the machine with a strong wave, 150V (1mA not more than 1h). QB/12523 --2004
250V or T voltage is twice the rated voltage period 1000V (voltage is greater than 250V, lasting 1mim electrical test: starting, except for engineers and transformers, it should meet the requirements of 5.22.
meter name
single-phase watt-hour meter
steam flow reform:
measurement type
insulated core in
planning method
non-electrical
current core flow test instrument
grounding protection performance
Gm--g999n
I[Type 1.
D.3m.n/g.-. mn/s
3 rJ vS
25A. 0. In
0rA20m4
±IC, ±
【Measurement port grounding resistance, shall comply with the standards of 5.2.3, c, d) a
0. 1 MPa--1.6 MPa:
GB/T3T5
b) Use an equalizing meter to measure the grounding resistance between the grounded and the exposed non-metallic conductor, which shall meet the requirements of 5.2.3b). 6.2.4 Protection device
Each main part of the control system shall be equipped with circuit protection, over-current protection or over-current protection device, which shall meet the requirements of 2.4. The voltage fluctuation of 625V can be verified without changing the power supply voltage. The machine shall meet the requirements of 5.2.5 when it is running at rated DC +10. 6.2.8 Sound barrier
Three normal rated coating pre-sequence by the middle, the railway and the center, the use of grade calculation business 1.2m, fill the machine less shape only inch center then, from the machine wheel which 1, respectively into chaos and, down, open, no flash point suction straight, take the arithmetic average color as the machine! Compensation, consider compliance with 5.2.6 regulations:
6.3 Performance
6.3.1 Fabric refers to the moisture content
Attached A (normative appendix] A2, take 1.2 times the rated selected paint weight of the tested machine, put it into the drying machine for drying T: 30:30:30, until the adjacent two weighing values change no more than 1 road, immediately take out the income column, walk the red clothes on the mother pastoral fabric wash off, the weight plate is insufficient to show the excessive part with a napkin to adjust, and Carry out a 5m drift, and then immediately start the weight when the moisture content is calculated using the formula ([), taking into account the implementation of the 5.3. "standard. YYYKANTKAa
QB/T2323-2CC4
7-1 Water content: %
After the test fabric is tested, the direct current of the fabric is: kg
Gtx100
- Under the test supervision, the fabric is tested and measured after burning, 6. 3. 2 Vibration performance
The model machine is in the state of color, and after the washing and dehydration are stable, the machine is tested with the correct matching and industry standard 53.2.
6.3.3 Level control
Visually inspect the full-automatic washing and dehydrating machine during the rated washing process. The liquid level control device meets the requirements of 5.3.3. 6.3.4 Operation
Day test: simulate the selected cycle, and manually operate each time. It should meet the requirements of 5.3.4. Single test: The whole washing station will be tested with the specified washing equipment and white flash. Inspection: The machine shall be tested for 11 consecutive times without any reason. During the machine test, the machine shall be tested for 5 consecutive times without any reason. The machine shall comply with the provisions of 5.3.4. 6.3.5 Drainage time
When the machine is in the state of human input, after the rated rinse water is injected, the timer is used to measure the time from the beginning of the water mixing to the water flowing to the normal state. The machine shall comply with the provisions of 5.3.5. 6.3.6 Heating time
When the machine is under the effective cleaning degree (the center line of the optical inspection language is determined), the water temperature rises by 60K, and the time required for the measurement shall not be greater than the provisions of 5.3.6.
6.3.7 Only the table
The table during the washing process shall comply with the provisions of 5.3.7. 6.3.8 Cleaning rate
Company) According to the test method given in Appendix A, the cleaning rate shall comply with the provisions of 5.3.8:! Plan method. Select four pairs of fabrics with basically the same degree of dirtiness and mark them. Wash one of the four pairs normally and compare the cleaning effect.
6.3.9 Mechanical damage
After the test in 6.3.4 is completed, the fabrics should be tested in accordance with 5.3.6.3.10 Energy
When the machine is under rated conditions, use a single-phase or electric meter, a current gauge, and a water timer to measure the time and record the operation of the program set in A.3.2. The amount of water, water and steam consumed by the water temperature rise (602)K shall be calculated according to the formula (2), formula (3), and formula (4). The results shall be determined. G.3.10.1 Calculation of power consumption
D-The amount of power consumed by washing dry grams,54 Nameplate and logo
! The nameplate and logo of the non-product machine of Jizhou are not in good condition, and the logo is not in good condition. There are no scratches, cracks, etc. on the machine. The pipe on the machine or the pipe of the Qingshan machine is in good condition, and there is no plastic or peeling phenomenon.
5.5.5 In this inspection, the machine is in good condition, and there are no abnormal phenomena. 5.5.6 The machine is in good condition, and the machine is in good condition. 5.5.7 The machine is in good condition, and there is no addition phenomenon at the joint. 6 Test method
8.1 Test conditions and test instruments and meters
6.11 Test conditions
a Micrometer is used for testing. The test site is located in a place away from the environment or in a convenient place. The temperature of the environment is within 15~15℃. The required heat power of the water is within 0.4MPa and the air is within 0.2MPa. The temperature of the air is within 0.4MPa and 0.6MPa. 6.12 Test instruments and meters
6.2 Safety performance
6. 2. 1. Under normal conditions, use a V megohmmeter to measure the resistance between the charged body and the metal layer of the machine. 5.2.1H period. 6.22. Electric strength. The tester needs to test the core of the machine with a strong wave, 150V (1mA not more than 1h). QB/12523 --2004
250V or T voltage is twice the rated voltage period 1000V (voltage is greater than 250V, lasting 1mim electrical test: starting, except for engineers and transformers, it should meet the requirements of 5.22.
meter name
single-phase watt-hour meter
steam flow reform:
measurement type
insulated core in
planning method
non-electrical
current core flow test instrument
grounding protection performance
Gm--g999n
I[Type 1.
D.3m.n/g.-. mn/s
3 rJ vS
25A. 0. In
0rA20m4
±IC, ±
【Measurement port grounding resistance, shall comply with the standards of 5.2.3, c, d) a
0. 1 MPa--1.6 MPa:
GB/T3T5
b) Use an equalizing meter to measure the grounding resistance between the grounded and the exposed non-metallic conductor, which shall meet the requirements of 5.2.3b). 6.2.4 Protection device
Each main part of the control system shall be equipped with circuit protection, over-current protection or over-current protection device, which shall meet the requirements of 2.4. The voltage fluctuation of 625V can be verified without changing the power supply voltage. The machine shall meet the requirements of 5.2.5 when it is running at rated DC +10. 6.2.8 Sound barrier
Three normal rated coating pre-sequence by the middle, the railway and the center, the use of grade calculation business 1.2m, fill the machine less shape only inch center then, from the machine wheel which 1, respectively into chaos and, down, open, no flash point suction straight, take the arithmetic average color as the machine! Compensation, consider compliance with 5.2.6 regulations:
6.3 Performance
6.3.1 Fabric refers to the moisture content
Attached A (normative appendix] A2, take 1.2 times the rated selected paint weight of the tested machine, put it into the drying machine for drying T: 30:30:30, until the adjacent two weighing values change no more than 1 road, immediately take out the income column, walk the red clothes on the mother pastoral fabric wash off, the weight plate is insufficient to show the excessive part with a napkin to adjust, and Carry out a 5m drift, and then immediately start the weight when the moisture content is calculated using the formula ([), taking into account the implementation of the 5.3. "standard. YYYKANTKAa
QB/T2323-2CC4
7-1 Water content: %
After the test fabric is tested, the direct current of the fabric is: kg
Gtx100
- Under the test supervision, the fabric is tested and measured after burning, 6. 3. 2 Vibration performance
The model machine is in the state of color, and after the washing and dehydration are stable, the machine is tested with the correct matching and industry standard 53.2.
6.3.3 Level control
Visually inspect the full-automatic washing and dehydrating machine during the rated washing process. The liquid level control device meets the requirements of 5.3.3. 6.3.4 Operation
Day test: simulate the selected cycle, and manually operate each time. It should meet the requirements of 5.3.4. Single test: The whole washing station will be tested with the specified washing equipment and white flash. Inspection: The machine shall be tested for 11 consecutive times without any reason. During the machine test, the machine shall be tested for 5 consecutive times without any reason. The machine shall comply with the provisions of 5.3.4. 6.3.5 Drainage time
When the machine is in the state of human input, after the rated rinse water is injected, the timer is used to measure the time from the beginning of the water mixing to the water flowing to the normal state. The machine shall comply with the provisions of 5.3.5. 6.3.6 Heating time
When the machine is under the effective cleaning degree (the center line of the optical inspection language is determined), the water temperature rises by 60K, and the time required for the measurement shall not be greater than the provisions of 5.3.6.
6.3.7 Only the table
The table during the washing process shall comply with the provisions of 5.3.7. 6.3.8 Cleaning rate
Company) According to the test method given in Appendix A, the cleaning rate shall comply with the provisions of 5.3.8:! Plan method. Select four pairs of fabrics with basically the same degree of dirtiness and mark them. Wash one of the four pairs normally and compare the cleaning effect.
6.3.9 Mechanical damage
After the test in 6.3.4 is completed, the fabrics should be tested in accordance with 5.3.6.3.10 Energy
When the machine is under rated conditions, use a single-phase or electric meter, a current gauge, and a water timer to measure the time and record the operation of the program set in A.3.2. The amount of water, water and steam consumed by the water temperature rise (602)K shall be calculated according to the formula (2), formula (3), and formula (4). The results shall be determined. G.3.10.1 Calculation of power consumption
D-The amount of power consumed by washing dry grams,
GB/T3T5
兆欢爽
b) Use an average resistance meter to measure the grounding resistance between the grounded and exposed non-metallic conductors. The grounding resistance should meet the requirements of 5.2.3b). 6.2.4 Protection devices
Each major part of the control system should have a circuit protection, over-current protection or over-current protection device, which should meet the requirements of 2.4. The voltage fluctuation of 625 can be verified without changing the power supply voltage. The machine should meet the requirements of 5.2.5 when it is in the rated DC ×! +10. 6. 2. 8 Sound barriers
Three normal rated coatings are in the middle, and the railway and decoupling are separated. The level of the meter is 1.2m, and the machine is only 1 inch away from the machine. The machine is separated by 1, and the machine is separated by 1, and the arithmetic average color is taken as the machine's! Compensation, consider meeting the requirements of 5.2.6:
6.3 Performance
6.3.1 Fabric refers to the moisture content
Appendix A (Normative Appendix] A2, take 1.2 times the rated weight of the tested machine belt, put it into the industrial drying machine for drying T: 30:30:30, move it three times until the change of the two adjacent weighing values is not more than 1 road, take it out immediately and put it into the large hope column, walk the red clothes on the mother pasture fabric washing, adjust the part that is insufficient with a napkin, and Carry out a 5m drift, and then immediately start the weight when the moisture content is calculated using the formula ([), taking into account the implementation of the 5.3. "standard. YYYKANTKAa
QB/T2323-2CC4
7-1 Water content: %
After the test fabric is tested, the direct current of the fabric is: kg
Gtx100
- Under the test supervision, the fabric is tested and measured after burning, 6. 3. 2 Vibration performance
The model machine is in the state of color, and after the washing and dehydration are stable, the machine is tested with the correct matching and industry standard 53.2.
6.3.3 Level control
Visually inspect the full-automatic washing and dehydrating machine during the rated washing process. The liquid level control device meets the requirements of 5.3.3. 6.3.4 Operation
Day test: simulate the selected cycle, and manually operate each time. It should meet the requirements of 5.3.4. Single test: The whole washing station will be tested with the specified washing equipment and white flash. Inspection: The machine shall be tested for 11 consecutive times without any reason. During the machine test, the machine shall be tested for 5 consecutive times without any reason. The machine shall comply with the provisions of 5.3.4. 6.3.5 Drainage time
When the machine is in the state of human input, after the rated rinse water is injected, the timer is used to measure the time from the beginning of the water mixing to the water flowing to the normal state. The machine shall comply with the provisions of 5.3.5. 6.3.6 Heating time
When the machine is under the effective cleaning degree (the center line of the optical inspection language is determined), the water temperature rises by 60K, and the time required for the measurement shall not be greater than the provisions of 5.3.6.
6.3.7 Only the table
The table during the washing process shall comply with the provisions of 5.3.7. 6.3.8 Cleaning rate
Company) According to the test method given in Appendix A, the cleaning rate shall comply with the provisions of 5.3.8:! Plan method. Select four pairs of fabrics with basically the same degree of dirtiness and mark them. Wash one of the four pairs normally and compare the cleaning effect.
6.3.9 Mechanical damage
After the test in 6.3.4 is completed, the fabrics should be tested in accordance with 5.3.6.3.10 Energy
When the machine is under rated conditions, use a single-phase or electric meter, a current gauge, and a water timer to measure the time and record the operation of the program set in A.3.2. The amount of water, water and steam consumed by the water temperature rise (602)K shall be calculated according to the formula (2), formula (3), and formula (4). The results shall be determined. G.3.10.1 Calculation of power consumption
D-The amount of power consumed by washing dry grams,
GB/T3T5
兆欢爽
b) Use an average resistance meter to measure the grounding resistance between the grounded and exposed non-metallic conductors. The grounding resistance should meet the requirements of 5.2.3b). 6.2.4 Protection devices
Each major part of the control system should have a circuit protection, over-current protection or over-current protection device, which should meet the requirements of 2.4. The voltage fluctuation of 625 can be verified without changing the power supply voltage. The machine should meet the requirements of 5.2.5 when it is in the rated DC ×! +10. 6. 2. 8 Sound barriers
Three normal rated coatings are in the middle, and the railway and decoupling are separated. The level of the meter is 1.2m, and the machine is only 1 inch away from the machine. The machine is separated by 1, and the machine is separated by 1, and the arithmetic average color is taken as the machine's! Compensation, consider meeting the requirements of 5.2.6:
6.3 Performance
6.3.1 Fabric refers to the moisture content
Appendix A (Normative Appendix] A2, take 1.2 times the rated weight of the tested machine belt, put it into the industrial drying machine for drying T: 30:30:30, move it three times until the change of the two adjacent weighing values is not more than 1 road, take it out immediately and put it into the large hope column, walk the red clothes on the mother pasture fabric washing, adjust the part that is insufficient with a napkin, and Carry out a 5m drift, and then immediately start the weight when the moisture content is calculated using the formula ([), taking into account the implementation of the 5.3. "standard. YYYKANTKAa
QB/T2323-2CC4
7-1 Water content: %
After the test fabric is tested, the direct current of the fabric is: kg
Gtx100
- Under the test supervision, the fabric is tested and measured after burning, 6. 3. 2 Vibration performance
The model machine is in the state of color, and after the washing and dehydration are stable, the machine is tested with the correct matching and industry standard 53.2.
6.3.3 Level control
Visually inspect the full-automatic washing and dehydrating machine during the rated washing process. The liquid level control device meets the requirements of 5.3.3. 6.3.4 Operation
Day test: simulate the selected cycle, and manually operate each time. It should meet the requirements of 5.3.4. Single test: The whole washing station will be tested with the specified washing equipment and white flash. Inspection: The machine shall be tested for 11 consecutive times without any reason. During the machine test, the machine shall be tested for 5 consecutive times without any reason. The machine shall comply with the provisions of 5.3.4. 6.3.5 Drainage time
When the machine is in the state of human input, after the rated rinse water is injected, the timer is used to measure the time from the beginning of the water mixing to the water flowing to the normal state. The machine shall comply with the provisions of 5.3.5. 6.3.6 Heating time
When the machine is under the effective cleaning degree (the center line of the optical inspection language is determined), the water temperature rises by 60K, and the time required for the measurement shall not be greater than the provisions of 5.3.6.
6.3.7 Only the table
The table during the washing process shall comply with the provisions of 5.3.7. 6.3.8 Cleaning rate
Company) According to the test method given in Appendix A, the cleaning rate shall comply with the provisions of 5.3.8:! Plan method. Select four pairs of fabrics with basically the same degree of dirtiness and mark them. Wash one of the four pairs normally and compare the cleaning effect.
6.3.9 Mechanical damage
After the test in 6.3.4 is completed, the fabrics should be tested in accordance with 5.3.6.3.10 Energy
When the machine is under rated conditions, use a single-phase or electric meter, a current gauge, and a water timer to measure the time and record the operation of the program set in A.3.2. The amount of water, water and steam consumed by the water temperature rise (602)K shall be calculated according to the formula (2), formula (3), and formula (4). The results shall be determined. G.3.10.1 Calculation of power consumption
D-The amount of power consumed by washing dry grams,
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.