This standard applies to lead printing color inks. Lead printing color inks are made of resin, dry vegetable oil, mineral oil and filler, etc., which are mixed and ground. They are used by general letterpress printing presses to print trademarks, forms and books on offset paper, letterpress paper, white board paper and other paperboards. QB/T 3594-1999 Lead printing color inks QB/T3594-1999 Standard download decompression password: www.bzxz.net
This standard applies to lead printing color inks. Lead printing color inks are made of resin, dry vegetable oil, mineral oil and filler, etc., which are mixed and ground. They are used by general letterpress printing presses to print trademarks, forms and books on offset paper, letterpress paper, white board paper and other paperboards.
Some standard content:
Classification number, A17 Light Industry Industry Standard of the People's Republic of China QB/T 3594—1999 Generation 78417001-1987 Lead Printing Color Ink 1999-04-21 Release State Bureau of Light Industry 1999-04-21 Implementation QB/T35941999 This standard is the original professional standard 7A17001-1987 China Color Ink", issued by the State Administration of Light Industry [1999] 1121, and the standard number is QB/T3594-1999, with no internal rate. The professional standard is also issued by the State Administration of Light Industry. This standard is issued by the National Standardization Technical Group. This standard was drafted by Gansu Province Book Industry Co., Ltd. The main drafters of this standard are Ruan Dongshan and Zhide. This standard is implemented at the same time as the original light industry 1 standard: Professional Standard 2BA17001-1987 for Printing Color Oils People's Republic of China Light Industry Industry Standard Lead Printing Color Ink QB/T 3594-1999 Replaces 2BA17001-1987 This standard applies to dry printing color oils. Lead printing color oils are made of resin, dry materials, mineral oil pigments and fillers, etc., which are mixed and ground. They are used for general letterpress printing machines to print special trademarks on offset paper, letterpress, white board paper and other paper plates, as well as for books and periodicals. 1 Product Color 1.1 Product colors are divided into seven types: white, yellow, red, black, etc. 1 3 colors. 2 Technical requirements 2.1 The products of this standard must meet the following technical indicators: Model T311c1 T31211 T31221 T3123: T21301 T31411 T3:431 T31501 731521 131531||t t||131A41 3 Test method note Product name Palm yellow quantity No dense blue quantity Zhongmeng ink Golden light tool Near the standard section Wang quantity calibrationbZxz.net Color strength head 2+--34 90-116 3.1 Tide color shall be implemented in accordance with the provisions of QB557-1983 Oil Color Test Method. 3.2 Color strength 3.3 Fineness shall be in accordance with the provisions of QB559 "1983 Ink Fineness Test Method". 3.4 Fluidity shall be in accordance with the provisions of QB550-1983 Fluidity Test Method". Approved by the State Bureau of Light Industry on April 21, 1999 29·~36 24--34 1999-04-21 implementation 4 Inspection Rules QB/T 3594 1999 4.1 Products shall be inspected by the factory inspection department before leaving the factory. Products that meet the technical indicators shall be allowed to leave the factory. Each batch of products shall be numbered, and the product name shall include batch number, location, and production date. 4. During the acceptance process, the receiving unit shall conduct all or part of the inspections according to the technical indicators of this standard, and the inspection personnel shall conduct inspections of all or part of the indicators. The rate of the batch shall be as low as 5% to 10%, and the sampling volume of each can (box) shall not be less than 20g. 4.3 When sampling, please carefully remove the dust and debris on the can (box) and tray to prevent foreign debris from falling into the sample. 4.4 During the acceptance, if it is found that the technical indicators are not met, the sample shall be re-tested. If the milk does not meet the requirements of this standard, the production and acceptance units shall jointly negotiate for exemption. 5. Labeling, packaging, transportation, storage 51. The printed color oil type should be packed in cans (boxes) or iron barrels. The iron barrels (boxes) should be packed in outer packaging boxes.52. The cans (disks) should be labeled with trademarks, manufacturer name, model, product name, production number and packaging date.53. The outer packaging surface should have the manufacturer name, model, product name, number, title and "Do not invert" mark.54. The product shall not be stored in the open air. The room must be dry and ventilated to prevent fire.5.5. During transportation and slow transportation, it shall not be pulled, dropped, bumped or rubbed to prevent the magnetic phase from overflowing from the packaging.56. This product can be transported by various tools such as cars, trucks, and machines.5.7. This product has an effective storage period of two years from the date of production under the storage conditions that meet the requirements of 5.4.5B. During the effective storage period, some individual indicators of this product may change. The manufacturer must ensure its use. Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.