This standard specifies the technical requirements, test methods, inspection rules, packaging, marking, transportation, storage and safety precautions for industrial phenol. This standard applies to industrial phenol obtained by fractionation of crude phenol obtained from coal tar and phenol-containing wastewater. GB/T 3709-1997 Industrial phenol GB/T3709-1997 Standard download decompression password: www.bzxz.net

GB/T3709-1997
This standard is revised and supplemented on the basis of GB3709-83. The scope, reference standards, safety precautions and other contents are added, the moisture index of industrial phenol is modified, and the inspection rules and the contents of the quality certificate are supplemented. From the date of entry into force of this standard, it replaces GB3709-83. This standard is proposed by the Ministry of Metallurgical Industry of the People's Republic of China. This standard is under the jurisdiction of the Information Standards Institute of the Ministry of Metallurgical Industry. The drafting units of this standard are Jiuquan Iron and Steel Company and the Information Standards Institute of the Ministry of Metallurgical Industry. The main drafters of this standard are Shi Wei, Li Meishu, Chen Daju and Sun Wei. This standard was first issued in 1983.
1 Scope
National Standard of the People's Republic of China
Technical phenol
GB/T 3709--1997
Replaces GB3709-83
This standard specifies the technical requirements, test methods, inspection rules, packaging, marking, transportation, storage and safety precautions for industrial phenol. This standard applies to industrial phenol obtained by fractionation of crude phenol prepared from coal tar and phenol-containing wastewater. 2 Referenced standards
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. At the time of publication of the standard, the versions shown are all valid. All standards are subject to revision. Parties using this standard should explore the possibility of using the latest versions of the following standards: GB1999—80 Sampling method for light oil in coking products GB2288—80 Determination method for moisture in coking products Method for determination of crystallization point of industrial phenol and phenol
GB 3710—87
GB3711—
GB 8170—87
3 Technical requirements
Determination method for neutral oil and pyridine base content of phenol products Numerical rounding rulesWww.bzxZ.net
The technical indicators of industrial phenol shall comply with the provisions of Table 1: Table 1
Indicator name
Crystallization point, C
Neutral oil content, %
Pyridine base content, %
Moisture, %
Test method
4.1 The determination of crystallization point shall be carried out in accordance with the provisions of GB3710. Not less than
Not greater than
Not greater than
Not greater than
4.2 The determination of neutral oil content and pyridine base content shall be carried out in accordance with GB3711. 4.3 The determination of water content shall be carried out in accordance with GB2288. 5 Inspection rules
5.1 The inspection and acceptance of industrial phenol quality shall be carried out by the quality supervision department. Refers to
5.2 The sampling and preparation of samples shall be carried out in accordance with GB1999. However, when sampling solidified products, they shall be completely melted before sampling. Approved by the State Bureau of Technical Supervision on March 17, 1997 and implemented on September 1, 1997
5.3 The rounding of values ​​shall be carried out in accordance with GB8170. 6 Packaging, marking, transportation and storage
GB/T 3709—1997
6.1 The product should be packed into clean and dry tank trucks or iron barrels, and the barrels should be marked with the product name, manufacturer name, net weight and "toxic" and "corrosive" signs.
6.2 Each batch of products leaving the factory should be accompanied by a quality certificate. The certificate content includes: supplier name, product name, standard number, batch number, gross weight, net weight, delivery date and various test results specified in this standard. 6.3 Keep away from fire and heat sources during transportation and storage, and pay attention to ventilation. It should be stored separately from oxidants. If it is piled in the open air, it should be prevented from rainwater infiltration.
7 Safety precautions
7.1 Industrial phenol is a toxic, corrosive and flammable substance with a special odor, so corresponding protective measures should be taken in the production site and during transportation and storage.
7.2 If industrial phenol catches fire, use water mist, foam, carbon dioxide, sand, etc. to extinguish the fire. If it touches human skin, it should be quickly wiped with 10% to 40% alcohol and then washed with soapy water. 168
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.