title>Thermal environmental conditions for human occupancy - GB/T 5701-2008 - Chinese standardNet - bzxz.net
Home > GB > Thermal environmental conditions for human occupancy
Thermal environmental conditions for human occupancy

Basic Information

Standard ID: GB/T 5701-2008

Standard Name:Thermal environmental conditions for human occupancy

Chinese Name: 室内热环境条件

Standard category:National Standard (GB)

state:in force

Date of Release2008-07-16

Date of Implementation:2009-01-01

Date of Expiration:2017-12-15

standard classification number

Standard ICS number:Environmental Protection, Health Care and Safety >> 13.180 Ergonomics

Standard Classification Number:Comprehensive>>Basic Standards>>A25 Ergonomics

associated standards

alternative situation:Replace GB/T 5701-2008

Procurement status:NEQ ANSI/ASHRAE55:2004

Publication information

publishing house:China Standards Press

Plan number:20061576-T-469

Publication date:2009-01-01

other information

Release date:1985-12-05

drafter:Zhang Wei, Xiao Hui, Ran Linghua, Zhang Xin

Drafting unit:Tsinghua University, China National Institute of Standardization

Focal point unit:National Technical Committee on Ergonomics Standardization

Proposing unit:National Technical Committee on Ergonomics Standardization

Publishing department:National Standardization Administration

competent authority:National Standardization Administration

Introduction to standards:

This standard specifies the indoor thermal environment conditions that are acceptable to most people. This standard is applicable to healthy adults who stay indoors for more than 15 minutes at an altitude of less than 3,000 meters. This standard refers to the American ANSI/ASHRAE55-2004 "Indoor Thermal Environment Conditions", and the consistency level is non-equivalent. This standard replaces GB/T5701-1985 "Suitable Temperature for Indoor Air Conditioning". Compared with GB/T5701-1985, the main changes are as follows: - The scope of application has been expanded to make it applicable to the conditions specified in the original standard as well as other complex situations; - The name has been changed according to the content of the standard; - The technical content is more detailed; - GB/T18048 and GB/T18049 have been added to the normative reference documents. GB/T 5701-2008 Indoor Thermal Environment Conditions GB/T5701-2008 Standard Download Decompression Password: www.bzxz.net
This standard specifies the indoor thermal environment conditions that are acceptable to most people. This standard is applicable to healthy adults who stay indoors for more than 15 minutes at an altitude of less than 3000m.
This standard refers to the American ANSI/ASHRAE55-2004 "Indoor Thermal Environment Conditions", and the consistency level is non-equivalent.
This standard replaces GB/T5701-1985 "Indoor Air Conditioning Optimum Temperature". Compared with GB/T5701-1985, the main changes are as follows:
--- The scope of application has been expanded to make it applicable to the conditions specified in the original standard and other complex situations;
--- The name has been changed according to the content of the standard;
--- The technical content is more detailed;
--- GB/T18048 and GB/T18049 have been added to the normative reference documents.
Appendix A of this standard is an informative appendix.
This standard is proposed and managed by the National Technical Committee for Ergonomics Standardization.
The main drafting units of this standard: Tsinghua University, China National Institute of Standardization.
The main drafters of this standard: Zhang Wei, Xiao Hui, Ran Linghua, Zhang Xin.
The previous versions of the standards replaced by this standard are:
--- GB/T5701-1985.
The clauses in the following documents become the clauses of this standard through reference in this standard. For any dated referenced document, all subsequent amendments (excluding errata) or revisions are not applicable to this standard. However, parties that reach an agreement based on this standard are encouraged to study whether the latest versions of these documents can be used. For any undated referenced document, the latest version is applicable to this standard.
GB/T18048 Ergonomics of thermal environment - Determination of metabolic rate (GB/T18048-2008, ISO8996:2004, IDT)
GB/T18049 Determination of PMV and PPD index and regulation of thermal comfort conditions in moderate thermal environment (GB/T18049-2000, eqvISO7730:1994)
ISO7726 Ergonomics of thermal environment - Instruments for measuring physical quantities
Foreword I
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
4 General requirements 4
5 Thermal comfort conditions 5
6 Adoption of standards 14
7 Evaluation of thermal environment 15
Appendix A (Informative Appendix) Calculation of operating temperature 18
References 19

Some standard content:

1CS13.180
National Standard of the People's Republic of China
GB/T5701-2008
Replaces GB/T5701—1985
Indoor thermal environmental conditions
Thermal environmental conditions for human occupancy2008-07-16 Issued
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of ChinaStandardization Administration of the People's Republic of China
2009-01-01Implementation
GB/T 5701—2008
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
5 Thermal comfort conditions
6 Adoption of standard recommendation…
7 Evaluation of thermal environment:
Appendix A (informative appendix) Calculation of working temperature References
.......
GB/T 5701—2008
This standard refers to the American ANSI/ASHRAE55-2004 "Indoor thermal environment conditions\, the degree of consistency is non-equivalent, this standard replaces GB/T57011985 Indoor air conditioning to the appropriate temperature". Compared with GB/T5701-1985, the main changes are as follows: - The scope of application has been expanded to make it applicable to the conditions specified in the original standard and other complex situations; - The name has been changed according to the content of the standard; - The technical content is more detailed; - GB/T18048 and GF/T18049 have been added to the normative reference documents. Appendix A of this standard is an informative appendix.
This standard is proposed and managed by the National Technical Committee for Human Ergonomics Standardization. The main drafting units of this standard are: Tsinghua University, China National Institute of Standardization. The main drafters of this standard are: Zhang Wei, Xiao Hui, Ran Linghua, Zhang Xin. The previous versions of the standards replaced by this standard are: GB/T5701-1985.
1 Scope
Indoor thermal environment conditions
This standard specifies the indoor thermal environment conditions that can be accepted by most people. This standard is applicable to healthy adults who stay indoors for more than 15 minutes at an altitude of less than 3000 m above sea level. 2 Normative references
GB/T 5701—2008
The following clauses become clauses of this standard through reference in this standard. For all referenced documents with dates, all subsequent amendments (excluding errata) or revisions are not applicable to this standard. However, parties that reach an agreement based on this standard are encouraged to study whether the latest versions of these documents can be used. For all referenced documents without dates, the latest versions are applicable to this standard.
GB/T18048 Thermal environment ergonomics Determination of metabolic rate (GB/T18048-2008.IS08996:2004, IDT) GB/T18049 Determination of PMV and PPD index in moderate thermal environment and regulations on thermal comfort conditions (GB/T18019-2000, eqvISO7730:1994)
[ISO7726 Thermal environment ergonomics Physical quantity measurement instruments 3 Terms and definitions
The following terms and definitions apply to this standard. 3.1
Adaptive model
A model that relates indoor design temperature or acceptance temperature range to outdoor meteorological or climatological parameters. 3.2
Air speed
The speed of air movement at a certain point, regardless of directionality. 3.3
clo
Unit used to express the thermal insulation performance of clothing, 1clo=0.155m2:℃/W. 3.4
thermal comfort
Indicates the subjective satisfaction with the thermal environment, which is assessed through subjective evaluation. 3.5
draft
The air flow that causes different degrees of coldness in parts of the body. 3.6
draft rate
The percentage of people who are dissatisfied due to full-flow draft. 3.7
thermal environment
Environmental characteristics that affect the heat dissipation of the human body. wwW.bzxz.Net
GB/T 5701—2008
Acceptable thermal environmentacceptablethermalenvironnentThe thermal environment that a significant majority of people feel is acceptable. 3.9
garment
A piece of clothing.
humidity ratio
The mass ratio of water vapor to dry air in a certain volume of air. 3. 11
Relative humidity
The ratio of the water vapor pressure (or mass) in the air to the saturated vapor pressure under the same pressure and temperature conditions. 3.12
Clothing warmth
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.