JB/T 2001.24-1999 Types and dimensions of drain plugs for water systems (PN=31.5MPa)
Basic Information
Standard ID:
JB/T 2001.24-1999
Standard Name: Types and dimensions of drain plugs for water systems (PN=31.5MPa)
Chinese Name:
水系统 放水塞 型式与尺寸(PN=31.5MPa)
Standard category:Machinery Industry Standard (JB)
state:in force
Date of Release1999-06-28
Date of Implementation:2000-01-01
standard classification number
Standard ICS number:Fluid systems and general parts >> 23.100 Fluid power systems
Standard Classification Number:Machinery>>General Parts>>J20 Hydraulic and Pneumatic Devices
Publication information
other information
Focal point unit:Metallurgical Equipment Standardization Technical Committee
Introduction to standards:
JB/T 2001.24-1999 JB/T 2001.24-1999 Types and dimensions of drain plugs for water systems (PN=31.5MPa) JB/T2001.24-1999 Standard download decompression password: www.bzxz.net
Some standard content:
IC.s$ 23.110
Machinery Industry Standard of the People's Republic of China
JB/T 2001.1~2001.74—1999
Water system assembly and parts1999-06-28 Issued
State Machinery Industry Bureau
2(-01-U1 Implementation
1 Scope
Machinery Industry Standard of the People's Republic of China
Water system-Water-dradeplug-type and size(PN=31.5 MPa ]
This standard specifies the types and sizes of the hole increase. This standard is used for various types of test pipes with a pressure of 31.5MPa. 2. Types and sizes
2.1 The dog should meet the requirements of 1.
1-Copper pad: 2-Hub chamber
2. 2 The size should conform to the provisions of Table 1. Code
B2130:.24.bzxZ.net
:2u1242
Marking example
Nominal source diameter 10 plus drain chamber:
Drain ink [N10JR.T200]24-1999
Guodong Machinery Industry Bureau 199-06-2 approved
JB/T2001.24-1999
Announcement 202484
20-1-0 affordable
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.