CB* 875-78 Shore Cable Reel CB*875-78 Standard download decompression password: www.bzxz.net

Ship Standards
Cable reel, used for storing shore cables on ships. Committee
1. Types and basic parameters of shore cable reels are as per Table 1. Class bzxz.net
Cable reel with collector ring
Handle type cable reel
Handwheel type cable reel
Cable diameter ()
2. Type and basic dimensions of Type A cable reel are as per Figure 1. 7
1-Current collector;
2 Electric rack
6-Support frame,
Published by Ship Standardization Committee
Ship Installation Professional Group
mm Maximum cable length (L) m
3-Protective cover shell;| |tt||7-electric roller;
8-shaft,
fixed-pitch screw;
CB*875
CHFR cable 3X25
Below 50A
5-limit pin;
-cable stuffing box
October 1, 1979
Made in Hudong
Total 4 pages Page 2
CB*875-78
3.The type and basic dimensions of Type B cable reel shall be as shown in Figure 2 and Table 2. Figure 2
1-simplified,
cable diameter
2-bearing seat;
6-ring:
3-frame;
a broadcast pin;
crank handle,
a small chain
5-axle
CB* 875-78
4, the type and basic dimensions of C-type cable reel are in accordance with Figure 3 and Table 30
1-commercial,
cable diameter
38 ~ 44
2-frame:
3→bearing,
7-pin;
4-spindle;
5-steel tube shaft;
8-small chain:
9-base
6-command ring:
Total 4 pages Page 3
Total 4 pages Page 4
CB*875-78
Marking example
Cable reel with collector ring:
Cable reel A28CB*875-78
Electric diameter @22 handle type cable reel:
Cable reel B22CB*875-78
5. Cable reels shall meet the requirements of this standard and be manufactured according to the unified drawings. 6. The surface of the cable reel parts shall be smooth and free of defects such as dents, burrs, cracks, etc. 7. Turn the cable reel to check whether it rotates lightly and smoothly, and whether the brush and the friction surface of the slip ring are in full contact. 8. The cable reel is fixed to the base with bolts, and welding is also allowed. 9. The friction surface of the manufactured cable reel should be coated with lubricating oil, and the other surfaces should be coated with anti-rust primer and color paint (color paint should be applied after installation on the ship).
10. The main parts of the cable reel with collector ring shall be made of materials according to Table 4. Table 4
Conductive slip ring
Conductive plate
Slip ring seat plate
Protective cover shell
Roller, support frame
Phenolic laminated cloth board
Ordinary carbon steel
11. The following markings should be placed on the bracket of each cable reel: (1) Manufacturer name; (2) Product model and standard number, such as A28 (3) Production batch number or production year and month; (4) Inspection seal.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.