This standard specifies the form and code, main dimensions and rated load, technical requirements, test methods and marking, transportation and storage of box-type and column-type pallets. This standard applies to reusable box-type and column-type pallets. GB/T 18832-2002 Box-type and column-type pallets GB/T18832-2002 Standard download decompression password: www.bzxz.net
This standard specifies the form and code, main dimensions and rated load, technical requirements, test methods and marking, transportation and storage of box-type and column-type pallets. This standard applies to reusable box-type and column-type pallets.

1cs 55. 180. 20
National Standard of the People's Republic of China
GB/T18832--2002
Box pallet and post pallet
2002-09-11 Issued
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
2003-03-01 Implementationwww.bzxz.net
This standard was proposed by the Ministry of Communications of the People's Republic of China. This standard was issued by the China Communications Research Institute: Foreword
CB/T1B832—2002
Standard drafting units: China Communications Research Institute, China Standard Metrology Research Institute, China National Packaging Corporation The drafters of this standard are Lu Caiqi, Men Wei, Zhang Di and Xu Weihong. Specification
Box-type and column-type pallets
GB/T 18832:2002
This standard specifies the form and designation of box-type and column-type pallets, main dimensions and specified loads, installation requirements, test methods and markings. This standard is applicable to box-type and column-type pallets for export. 2 Normative references
The clauses in the following documents become the clauses of this standard through reference in this standard. For any dated referenced document, all subsequent amendments (excluding errors) or revisions are not applicable to this standard. However, parties intending to reach an agreement on the standard are encouraged to investigate whether the latest version of the document can be used. For undated referenced documents, the latest version applies to this standard. G129342996 Main dimensions and tolerances of flat pallets + V1903790: 19716-200 Pallet Technology (S445: 199)
G1/499-1996 Performance requirements for intermodal general-purpose flat pallets GBT109-1996 Intermodal general-purpose pallet test method (cqVISO2244: 1335) (B/12357.11-1992 Packaging and transportation package Horizontal impact wheel method for loading parts 3 Terms and definitions
The terms and definitions established in GB/T371S2000 and the following terms and definitions are applicable to this standard. 3..1
Pan-type palletluoxallel
A pallet that is box-shaped, including three external structural forms of a whole board, a strip-type and a third wall. One or more of the box walls are provided with a removable or detachable loading and unloading door, which may be pre-covered. 3.2
Pastel pallet
It is an upright pallet used to support uniform-sized goods and can be equipped with detachable connecting rods or doors. 4 Forms and codes
4.1 Forms and codes of belt palletsSee Table 1, Figure 1, Table 1 for the types shown in Figure 1. Forms and codes of adhesive pallets
Fixed type
Non-stacking type
Addressable type
Each can be registered
The upper part and the upper moving parts are fixed
E Chenjunmen Folding Gold
Heart BT18832-·2002
Non-stacking light protection type
If it is with a nuclear standard, add "R"
Non-stacking bone type
Table 1 continued)
Fast surface
Not difficult to quality
Stackable type
Figure 1 Typical foil pallet
4.2 The type of text tray is subject to the code shown in Table 2, typical diagram Figure 2 Table 2 Types and codes of vertical pallets
Fillable blade fixed type| 5 main dimensions, tolerances and measurement specifications
Figure 2 Typical column type pallet
Standard type pallet
GR/T18832—2002
Stackable
5.1 The dimensions and tolerances of the surface dimensions and fork hole dimensions of the box type pallet shall comply with the provisions of GB234-16. The dimensions of the plane outer dimension is 121mm×1m: the height dimension shall be generally below 2200mm. The folding part of the standing bracket and the vertical hanging bracket can be folded, no matter whether it is folded or not, its external dimensions should be within the specified dimensions. 5.2 The rated load capacity of box-type and vertical pallets is 805kg, 500kg, 1000kg, 500kg and 2000kg. 6 Technical requirements
6.1 General requirements
The appearance of the pallet, box-type pallet should be free from damage, tilt, unevenness, deformation, unevenness, uneven load layer and other obstacles to use. The markings are clear:
5.2 Properties
6.2.1 The flexural strength of the bearing surface
7.1 The test deflection value shall be within the range of GB/T19951S96. 6.7.2 The vertical strength of the pallet can be increased by 2 escape tests. After the increase, it will not be used in a new shape and will have a permanent and permanent shape. 6.2.3 Horizontal strength of stackable pallets
GB/T18832-2002
Test according to 7.3. There should be no cracking, falling off of parts and long-term deformation. 62.4 Side plate strength of box-type pallets
Test according to ? 1. If there is any weakness, it cannot be used. 6.2.5 Stability of wheeled box-type pallets
Test according to ? .5.
7 Tests included. 1 Bearing section bending test
Carry out 8.2 of GB/J996-1996.
7. 2 Vertical strength test of stackable pallet
Cut the pallet fully and apply the maximum allowable load of 1.0 grams to the supporting part of the pallet to check for deformation. 7.3 Water strength test of stackable pallet
Apply external force to the length and width of the pallet on the second layer respectively, the smaller of which is one tenth of the maximum allowable stacking mass, to check whether there is any abnormal banding at the joint of the component, see Figure 3.
Horizontal test
All products
Definition benefit
3 horizontal strength test of stackable pallets
7.4 Pascal pallet measurement board visibility test
Fill the pallet with evenly distributed loads equivalent to the maximum load: according to the method of GB/T4857.11--102, place the pallet flat on the car of the incline testing machine and fix it, and conduct the test with 3 degrees of acceleration to check whether the pallet has light or not: the test is divided into stages, see Figure 4.
Temporary support
Phosphorus impact material
Figure 4 Box type pallet board strength test
7.5 Stability performance test of wheeled box type pallet
Under loaded conditions, place the wheeled pin type bracket on the inclined plane. Fix the wheels with appropriate methods, install them, and check if there is any change in the tilting. The wheeled box type pallet should be tested in the direction that is most likely to tip over, see Figure 5.
5 Stability performance test of wheeled box type pallet
B , marking, transportation, storage
B.1 Each pallet should be equipped with a nameplate at an appropriate position, indicating: 1) product name; 2) rated weight, k; 3) white weight, hg! 4) size (width x height, mm) 5) manufacturer, month and year of manufacture 6) date of manufacture 7) 2. Pallets should be properly packaged and protected. Pallets should be neatly arranged during storage and transportation to prevent accidents caused by mechanical problems. GR/T18832—2002 8) GA/T 18832 -2002 JIS Z0612:1977 9) JIS Z0616:1991 10) Intermodal pallets Reference document Test method for intermodal general box pallets
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.