Standard ICS number:Agriculture>>Agriculture and forestry>>65.020.99 Other standards related to agriculture and forestry
Standard Classification Number:Agriculture and Forestry>>Food and Feed Crops>>B20 Food and Feed Crops Comprehensive
associated standards
Publication information
publishing house:China Agriculture Press
Publication date:2004-02-01
other information
drafter:Peng Yufa, Fang Xiaoping, Lu Changming, Li Ning, Li Zaiyun, Fu Zhongwen
Drafting unit:Oil Crops Research Institute, Chinese Academy of Agricultural Sciences, Science and Technology Development Center, Ministry of Agriculture
Focal point unit:Ministry of Agriculture of the People's Republic of China
Proposing unit:Ministry of Agriculture of the People's Republic of China
Publishing department:Ministry of Agriculture of the People's Republic of China
This part of NY/T 721 specifies the test method for the survival and competitiveness of genetically modified rapeseed. This part of NY/T 721 is applicable to the possibility of genetically modified rapeseed becoming weeds, and the test of the competitiveness of genetically modified rapeseed with non-genetically modified rapeseed and weeds in wasteland and farmland. NY/T 721.1-2003 Technical Specifications for Environmental Safety Testing of Genetically Modified Rapeseed Part 1: Survival and Competitive Ability Test NY/T721.1-2003 Standard download decompression password: www.bzxz.net
This part of NY/T 721 specifies the test method for the survival and competitiveness of genetically modified rapeseed.
This part of NY/T 721 is applicable to the possibility of genetically modified rapeseed becoming weeds, and the test of the competitiveness of genetically modified rapeseed with non-genetically modified rapeseed and weeds in wasteland and farmland.
GB/T 3543.4 Inspection Procedure for Crop Seeds Germination Test
GB 4407.2 Oil Seeds of Economic Crops
Some standard content:
[C5 65. 020. 99 Agricultural Industry Standard of the People's Republic of China NY/r721.1-2003 Environmental impact testing of genetically modifled oil seed rape-Fart 1: testing the survival and competitiveness abilities2003-12-01 Ministry of Agriculture of the People's Republic of China 2004-03-01 Implementation NY/T721.1-2003 NY/T721 Technical Specification for Environmental Safety Inspection of Genetically Modified Oil is divided into the following parts: Part 1: Detection of genetic diversity; Part 2: Ecological and environmental risk control of foreign-based genetically modified organisms; Part 3: Detection of genetic diversity of cattle, which is the first part of 21. |tt||The appendix to this part is a data record The contents of this part are proposed by the People's Republic of China and the Ministry of Agriculture. The drafting position of this part: Institute of New Materials of Central Academy of Agricultural Sciences, Youye Technology Development Center The main drafters of this part are Peng Yufa, Fang Xiaolu Changming, Quan Keyun, and others. 2 1 Technical specification for environmental safety testing of genetically modified solid oils Part 1: Survival competitiveness test This part of NY/21 stipulates the flow test method for the survival competitiveness of genetically modified solid oils NY/T 721.1—2003 of the market part of the scope of the national registration of the transfer of the ability of the transfer of the ability of the transfer of the ability of the transfer of the ability of the non-transfer partner of the first batch of the warehouse flow of the use of the competition of the party: 2 Normative references The following documents are cited in the draft through NY/172 and become part of the provisions. All the referenced documents with a date are not subject to the content of the revision or revision of the date. However, all parties who have reached an agreement based on this part shall use the latest version of the document without a date. GR/3545.4 Inspection procedures for agricultural crops (iK44G7.2 Economic crop classification 3 Requirements 3.1 Test materials Genetically modified organisms, genetically modified organisms, non-genetically modified organisms promoted in the state, and the quality of the raw materials should be suitable for 1107.3 Requirements for the production of genetically modified organisms: 3.2 Recording of data 3.2.1 Name and location of the test Record the name of the test site and the location of the test, and use the coordinates of the test site or the global positioning system (CPS> control standard). Draw a micrograph, 3.2.2 Soil data Record soil type, soil fertility, drainage conditions, soil related plants and other contents. 3.2.3 Ecological type of the experimental site and record the conditions of the experimental site and other crops cultivated, as well as the names and hazards of common diseases, insects and local insect pests. 3.2.3.2 Agricultural ecological type Record the conditions of the experimental site and other crops cultivated, as well as the names and hazards of common diseases, insects and local insect pests. 3.2.4 Meteorological data Record the daily wind speed, daily rainfall (m) and duration (H) of the test period. Temperature and humidity (H) are displayed in the form of "table". Record the test results during the test period. For example, the test results may be caused by long-term changes in production, early harvest, fragrance, etc. 3.3 Test control measures 3.3.1 Isolation conditions The test site shall not be completed within 500r of planting. 3.3.2 Isolation measures Plant non-flower crops as the separation zone, and the area shall be tested in a small format. Designate a special person for the benefits of 3 NY/T 721.12003 3.3.3 During the test, if the test materials are found to be stolen, they should be abandoned in accordance with the provisions of the law. The competent department of the test and the local public security department should be informed immediately. 3.3.4 Handling of test materials: The test materials should be transported and kept by a designated person. After the test, except for the materials to be retained, the remaining test materials should be discarded. 3.3.5 Conclusion of post-test inspection tt||The license test reached the boundary benchmark ratio: the current year and the next year, no subspecies of vegetables and ten academic flowers, use special personnel to ensure stable non-marketable genetically modified forest seedlings 4 Trial method 4.1 Seed germination rate inspection variable E, "334X, implement the prescribed method 4.2 Seed viability test According to this group of test plans, shallow burial and deep burial (and after (months! Months, each variety needs to be repeated,! 3, the age of the product can be quickly seeded H The name and number of the variety were marked on the mirror and packaged in the Japanese version. The soil was filled with soil and the samples were taken from the mountain for testing after 6 and 13 months. The variance analysis was performed on the penetration rate. 4.3 Inspection of the ability of the crop to grow crops 4.3.1 Trial design The agricultural team conducted a trial in a diversion area and set up a random group design. The recipients of the genetic oil were collected from three local non-genetically modified varieties. The research package was 4.3.2 Planting The sowing time of winter vegetables was 0 to 1 day before, and the rapeseed area was 2. The experiment was conducted on wasteland before and after 15F. The actual germination rate was 16/m2. The key area was sown with the most seeds/m, and the width of the area was 12/m2. 4.3.3 Experimental management No training management was conducted during the experiment. The experimental area was marked with a regular training method. After the harvest, the plots in each area were shaded and transplanted according to other materials. In January, the plots were marked with a regular training method. The plots in each area were shaded and transplanted according to other materials. The plots in each area were stored in the cold weather and the types of crops were required in March of the next year. 3.4 Adjustment records The first, in December, the party promoted the ban, and the Shantou district in June to check the effect of the plants, the second winter rapeseed area in December, the rapeseed area in each plot to measure the number of survival, .3.5 Cross-table Fitness calculation: In total:www.bzxz.net 5The number of surviving plants in the second year, the unit is: W...The number of finished plants in the first year, the unit is special, 4.3.6 Results analysis Use variance analysis method to compare the fitness of products, Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.