This standard specifies the classification of various types of dredgers designed to change the dimensions of a waterway by digging or moving earth. Dredgers include ships or floating structures used for dredging purposes. GB/T 17383-1998 Classification of dredgers for shipbuilding and offshore structures GB/T17383-1998 Standard download decompression password: www.bzxz.net

GB/T17383---1998
This standard adopts ISO8385:1990 "Shipbuilding and offshore structures-Classification of dredgers". Appendix A of this standard is the appendix of the original ISO standard. This standard is proposed by China State Shipbuilding Corporation. This standard is under the jurisdiction of the Comprehensive Technical and Economic Research Institute of China State Shipbuilding Corporation. The drafting unit of this standard: Comprehensive Technical and Economic Research Institute of China State Shipbuilding Corporation. The main drafter of this standard: Kang Yuan.
GB/T17383
ISO Foreword
ISO (International Organization for Standardization) is an international organization of national standardization bodies (ISO member groups). The formulation of international standards is carried out by IS) technical committees. Each member group has the right to participate in the committee if it is interested in the subject of a technical committee. Governmental and non-governmental international organizations associated with ISO may also participate in this work. IS and the International Electrotechnical Commission (IE) work closely in all fields of electrical standardization. Draft international standards adopted by the technical committees are sent to the member bodies for approval before they are approved as international standards by the ISO Council. According to the ISO standard-setting procedure, a draft international standard needs at least 75% of the member bodies to vote in favor to become an international standard. International standard ISO8385 was prepared by ISO/TC8-Shipbuilding and offshore structures Technical Committee. Appendix A only provides information related to this standard. 1 Scope
National Standard of the People's Republic of ChinaWww.bzxZ.net
Shipbuilding and offshore structures
Dredgers
Shipbuilding and marine structures-Dredgers--- Classification
GB/T 17383--1998
idt ISO 8385:1990
This standard specifies the classification of various types of dredgers designed to change the size of a waterway by digging or moving mud. Dredgers include ships or floating structures used for dredging purposes. 2 Classification
Dredgers are classified according to the provisions of 1 to 11 in Table 1: 1) Operation area;
2) Ten physical characteristics;
3) Power plant:
4) Mobility;
5) Transportability;
6) Crew accommodation:
7) Location of dredging equipment;
8) Operation movement;
9) Shifting and propulsion equipment;
10) Dredging method;
11) Transportation of excavated materials.
Table 1 Classification
1 Operation area
1.1 Inland Rivers
1.3 Special Environment
Approved by the State Administration of Quality and Technical Supervision on May 18, 1998 66-1
Port Areas and Coastal Areas
1.2.2 Offshore
1.2.3 Oceangoing
Other Special Environments
Implemented on February 1, 1999
Quality Characteristics
3 Power Plant
4 Mobility
5 Transportability
6 Crew Cabin
7 Dredging Device Location
8 Operation Movement
2.1 Silt
2.2 Organic Soil
Pebbles and Gravel
2.5 Clay
2.6 Boulder and Rock
2.8 Mixed Soil||tt ||Steam engine
3.2 Diesel engine
3.3 Diesel-electric
3.4 ​​Diesel-hydraulic
3.5 Electric
Electric-hydraulic
3.7 Gas turbine
3.8 Nuclear power
3.9 Hybrid
4.1 Non-self-propelled
4.2 Self-propelled
4.3 Limited propulsion
Non-detachable
5.2 Detachable
Without crew cabin
6.2 With daytime rest cabin
With living cabin
Place in one hull
7.2 Place in two
Place in a well
7.4 Place on the deck
8.1 Longitudinal
GB/T 17383-1998
Table 1 (continued)
Transverse or lateral/arc
Combined and special movements
7.4.2 Head
8.1.1 Forwards
8.1.2 Backwards
Displacing and propulsion equipment
Dredging methods
11 Transportation of excavated material
GB/T17383-1998
Table 1 (end)
Propeller or other propulsion device
9.3 Spud piles
9.4 Combinations and special methods
10.1 Single bucket dredger
10.2 Grab bucket dredging Ship
10.3 Multi-bucket dredger
10.4 Gravel ship
Steel dredger
10.6 River bottom leveling ship
10.7 Agitation dredger
Suction dredger
Direct transportation
11.2 Hydraulic transportation
11.3 Mud chute
11.4 Belt conveyor
11.5 Mud barge transportation
11.6 Dredger with mud chamber
11.7 Combined dredger
Dredge pump type
10.8.2 Mud loosening method
Suction head type
10.1.1 Front shovel dredger|| tt||10.1.2 Backhoe Dredger
Single Grab Dredger
Multi-Grab Dredger
Drop Hammer
10.4.2 Impact
Drill and Blast
Centrifugal Pump or Axial Flow Slurry
10.8.1.2 Jet Pump
10.8.1.3 Air Lift
10.8.1.4 Combined and Special Pumps
10.8.2.1 Reamer
10.8.2.2 Bucket Wheel
10.8.2.3 Hydraulic Agitator
Combined and Special Methods
Combined and Special Types
1 1.2.1 Cantilever pipeline
11.2.2 Above-water pipeline
11.23 Submersible pipeline
Bottom mud gate or bottom valve
11.6.2 Split hull
11.6.3 Other methods
GB/T17383—1998
Appendix A
(Reminder Appendix)
References
［1]ISO8384：19911）Terms of use for shipbuilding and offshore structures Dredging vessels
2TPIANC2
Classification of soil and rock for dredging
1）It is being adopted and compiled as a national standard (GB). 2）Permanent International Associaton of Navigation Congresses.667
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.