This standard specifies the categories, technical requirements and test methods of coal for steam locomotives. This standard is applicable to coal for steam locomotives and can also be used as a basis for formulating industrial coal standards in mining areas and evaluating the use of coal resources. GB/T 4063-2001 Technical conditions for coal for steam locomotives GB/T4063-2001 Standard download decompression password: www.bzxz.net
Some standard content:
ICS75.160.10 National Standard of the People's Republic of China GB/T4063—2001 Specifications of coals for steam locomotive2001-03-19 Issued 2001-10-01 Implementation State Administration of Quality and Technical Supervision GB/T40632001 This standard replaces GB/T4063-1983 "Quality of coal for steam locomotives". Compared with the original standard, the following modifications have been made: 1 The writing format, symbols and measurement units have been modified according to GB/T1.1-1993 "Guidelines for standardization work Unit 1: Drafting and expression rules of standards Part 1: Basic provisions for standard writing" and GB/T483-1998 "General provisions for coal analysis and test methods"; 2 The inaccurate and inappropriate expression content and methods in GB/T4063-1983 have been modified; 3 The technical conditions such as coal type, particle size, calorific value, total sulfur, etc. in the original standard have been appropriately adjusted and modified, and the requirements for the lower limit rate of lump coal have been added; 4 Reference standards have been added. This standard replaces GB/T4063-1983 from the date of implementation. This standard is proposed by the State Coal Industry Bureau. This standard is under the jurisdiction of the National Coal Standardization Technical Committee. The drafting units of this standard are: Beijing Coal Chemistry Research Institute of China Coal Research Institute and Standard Metrology Institute of the Ministry of Railways. The main drafters of this standard are: Jiang Ying, Li Xuechun, Xu Zhengang, Xie Zhenzhong, Yu Wei. This standard is entrusted to Beijing Coal Chemistry Research Institute of China Coal Research Institute for interpretation. 1 Scope National Standard of the People's Republic of China Technical conditions for coals for steam locomotive Specifications of coalsfor steamlocomotive This standard specifies the categories, technical requirements and test methods of coals for steam locomotives. GB/T4063-2001 Replaces GB/T4063-1983 This standard applies to coals for steam locomotives and can also be used as a basis for formulating industrial coal standards in mining areas and evaluating the use of coal resources. 2 Referenced standards The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard is published, the versions shown are valid. All standards will be revised. Parties using this standard should explore the possibility of using the latest versions of the following standards. GB/T189—1997 GB/T212—1991 GB/T213—1996 GB/T214—1996 GB/T219—1996 GB474—1996 GB475--1996 GB5751—1986 MT/T1-1996bZxz.net Coal particle size classification Coal Industrial analysis method Method for determining the calorific value of coal Method for determining the total sulfur in coal Method for determining the fusibility of coal ash Method for preparing coal samples Method for taking commercial coal samples Classification of coal in China Method for taking and determining the grinding content and lower limit content of commercial coal samples 3 Classification, technical requirements and test methods of coal The classification, technical requirements and test methods of coal for steam locomotives shall comply with the provisions of Table 1. Table 1 Coal categories, technical requirements and test methods Item Particle size, mm Lump coal lower limit, % Volatile matter Vadaf, % Ash content Ad, % Ash fusibility ST, ℃ Sulfur content St.d, % Heating value Qnet,r, MJ/kg Technical requirements Lump coal or mixed lump coal of various particle sizes between 13 and 50 ≤24.0 ≥20.001) ≥1200) ≤1.002) 1) For coal that does not meet the Vdar and ST requirements, the supply and demand parties can negotiate to resolve the issue as needed. 2) For coal that does not meet the requirements, the supply and demand parties can negotiate to resolve the problem. Test methods approved by the State Administration of Quality and Technical Supervision on March 19, 2001 GB5751 GB/T189 GB/T212 GB/T212 GB/T219 GB/T214 GB/T213 2001-10-01Implementation Collection of coal samples GB/T4063—2001 Coal sampling shall be carried out in accordance with the commercial coal sampling method (GB475). Coal sample preparation Coal sample reduction shall be carried out in accordance with the coal sample preparation method (GB474). GB/T4063-2001 People's Republic of China National Standard Technical Conditions for Coal Use in Steam Locomotives GB/T4063—2001 Published by China Standards Press No. 16, Sanlihebei Street, Fuxingmenwai, Beijing Postal Code: 100045 Tel: 6852394668517548 Printed by China Standards Press, Qinhuangdao Printing Factory, Xinhua Bookstore North Distributed by Beijing Publishing House Sold by Xinhua Bookstores in various places* Format 880×12301/16 Printing sheet 1/2 Number of words 4,000 words First edition in August 2001 First printing in August 2001 Number of copies 1-1500 Book number: 155066·1-17730 Price 6.00 yuan Website www.bzcbs.com Subjects 576-544 Copyright reserved. Infringements will be investigated Report telephone number: (010) 68533533 Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.