JB/T 2453-1999 This standard is a revision of JB 2453-79 "Type, basic parameters and dimensions of molten iron car". During the revision, only editorial changes were made according to relevant regulations, and the main technical content remained unchanged. This standard specifies the type, basic parameters and dimensions of molten iron cars. This standard is applicable to molten iron cars used to transport molten iron in iron and steel plants of metallurgical enterprises. This standard was first issued on October 1, 1979. JB/T 2453-1999 Type, basic parameters and dimensions of molten iron cars JB/T2453-1999 Standard download decompression password: www.bzxz.net

ICS77.180
Machinery Industry Standard of the People's Republic of China
JB/T2453-1999
The type and basic data and the size for hot metal ladle car
The type and basic data and the size for hot metal ladle car1999-06-28 Issued
National Bureau of Machinery Industry
2000-01-01 Implementation
JB/T2453-1999
This standard is a revision of JB2453-79 "Type, basic parameters and size for hot metal ladle car". Only editorial changes were made to the original standard during the revision, and the main technical content remained unchanged. This standard replaces JB2453-79 from the date of implementation. This standard is proposed and managed by the Metallurgical Equipment Standardization Technical Committee. The drafting unit of this standard: Dalian Heavy Industry Group Co., Ltd. The main drafters of this standard: Li Li, Wang Fang, Gao Yiping. This standard was first issued on October 1, 1979. 1 Scope
Machinery Industry Standard of the People's Republic of China www.bzxz.net
Hot metal ladle car
Type, basic parameters and dimensions
The type and basic data and the sie for hot metal ladle car This standard specifies the type, basic parameters and dimensions of hot metal ladle cars. This standard is applicable to hot metal ladle cars used to transport hot metal in ironmaking plants and steelmaking plants of metallurgical enterprises. 2 Type, basic parameters and dimensions
2.1 Type
a) The type of ZT35, ZT65, ZTC65, and ZT100 hot metal ladle cars is shown in Figure 1; b) The type of ZT140 hot metal ladle car is shown in Figure 2;
c) The type of ZT180 hot metal ladle car is shown in Figure 3;
d) The type of ZT200 hot metal ladle car is shown in Figure 4.
Basic parameters and dimensions
a) The basic parameters and dimensions shall conform to the provisions of Table 1 and Figures 1 to 4; b) When the molten iron car is overturned, the matching dimensions with the front support shall conform to the provisions of Table 2 and Figure 5 Table 1
Basic parameters and dimensions
ZTC-65
ZT-100
ZT-140
ZT-180
ZT-200
Mould iron ladle
Mould iron ladle hanging shaft
Hook tongue
Center distance A
1 The dead weight does not include the weight of refractory materials.
2. ZTC type is the extended type
Inside distance L
Approved by the State Bureau of Machinery Industry on 1999-06-28. Coupler center
Line to rail surface
Through rail
Minimum curvature
Bogie
Center plate distance
Bogie
Fixed axle
JB/T2453—1999
Replace JB245379
Overall dimensions
6580×3250×2700
8200X3580 ×3664
7000X3580X3420
8200X3600X4210
9550X3700X4550
14500X3800X4700
12500×50 00X5350
Implemented on 2000-01-01
JB/T2453—1999
JB/T2453-1999
JB/T2453—1999
JB/T2453-1999
ZTG-65
ZT-100
ZT-140
ZT-180
JB/T2453-1999
2.3 Model
2453-1999
Capacity of molten iron tank, t
Generally omitted, extended C
Hot metal car
Metallurgical vehicles
Mechanical industry standards
Hot metal car model, basic parameters and dimensions
JB/T2453-1999
Mechanical Science Research Institute Published and distributed
Printed by the China Academy of Mechanical Science
(No. 2, Shouti South Road, Beijing: Postal Code 100044)*
Format 880×1230
1/16 Printing sheet 3/4
4 Word count 16,000
First edition in December 1999
First printing in December 1999
Print run 1-500
Price 1,000 yuan
99-1156
Mechanical Industry Standards Service Network: http/AvwwJB.ac.cn666
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.