Kilogram-force and newton conversion tables
Basic Information
Standard ID:
GB/T 4112-1983
Standard Name:Kilogram-force and newton conversion tables
Chinese Name:
千克力与牛顿的相互换算表
Standard category:National Standard (GB)
state:Abolished
Date of Release1983-01-02
Date of Implementation:1984-10-01
Date of Expiration:2005-10-14
standard classification number
Standard ICS number:01.060.10
Standard Classification Number:General>>Measurement>>A51 Quantity and Unit
associated standards
Publication information
other information
Release date:1983-12-26
Review date:2004-10-14
Drafting unit:National Bureau of Metrology
Focal point unit:National Technical Committee for Standardization of Quantities and Units
Publishing department:National Standardization Administration
competent authority:National Standardization Administration
Introduction to standards:
GB/T 4112-1983 Conversion table between kilogram force and newton GB/T4112-1983 standard download decompression password: www.bzxz.net
Some standard content:
1 Introduction
National Standard of the People's Republic of China
Conversion tables of kilogram-force and newton
Kilogram-force and newton
conversion tables
UDC531.78.081
GB4112—83 bZxz.net
1.1 This standard applies to all occasions where kilogram-force (kgf) is converted into newton (N) and newton is converted into gram-force. The conversion tables of this standard are limited to general conversions. The converted figures in the conversion tables are rounded to five significant figures in accordance with the provisions of GB1.1-81 "General Provisions for the Preparation of Standards in the Guidelines for Standardization Work", and the figures below 1 are rounded to four decimal places. If necessary, the calculation and rounding shall be carried out according to the conversion factors given in 1.2. The rounding rules shall be in accordance with the provisions of GB1.1-81 (see Appendix A of GB4116-83 "Conversion Tables of Oersted and Ampere per Meter"). 1.2 Conversion factor:
1kgf=9.80665N
1N=1/9.80665kgf
2 Conversion table
Published by the National Bureau of Standards on December 26, 1983
Implemented on October 1, 1984
GB4112-83
Table 1 Conversion table from kilogram-force to newton
1kgf=9.80665N
GB 4112-83
Continued Table 1
GB4112—83
: Conversion table from newton to kilogram-force
1N=1/9.80665kgf
GB4112—83
Continued Table 2
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.