JB/T 9162.37-1999 Probe Dimensions
Basic Information
Standard ID:
JB/T 9162.37-1999
Standard Name: Probe Dimensions
Chinese Name:
测头 尺寸
Standard category:Machinery Industry Standard (JB)
state:in force
Date of Release1999-05-20
Date of Implementation:2000-01-01
standard classification number
Standard ICS number:Mechanical Manufacturing>>Machine Tools>>25.080.01 General Machine Tools
Standard Classification Number:Machinery>>Process Equipment>>J44 General Fixture
Publication information
other information
Focal point unit:Mechanical Science Research Institute
Introduction to standards:
JB/T 9162.37-1999 JB/T 9162.37-1999 Probe Dimensions JB/T9162.37-1999 Standard download decompression password: www.bzxz.net
Some standard content:
JCS 25.080.01
Machinery Industry Standard of the People's Republic of ChinabzxZ.net
JB/T9162.1-9162.48--1999
Inspection fixture parts and components
The parts and units of inspection jig1999-05-20 Issued
State Machinery Industry Bureau
Implementation on 2000-01-01
Machinery Industry Standard of the People's Republic of China
Dimenslons
This standard specifies the type and size of the head.
Type and size
Type and size are as specified in the figure below.
Marking example:
Marking of type A probe with a diameter of 4 mm Probe A4JB3/162.31
National Machinery Industry Corporation 1999-05-20 approved JB/T9162.37—1999
Generated 2144001.3737
2000-01-01 implementation
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.