GB 3733.2-1983 Compression-type straight-through connector
Basic Information
Standard ID:
GB 3733.2-1983
Standard Name: Compression-type straight-through connector
Chinese Name:
卡套式端直通接头体
Standard category:National Standard (GB)
state:in force
Date of Release1983-06-17
Date of Implementation:1984-04-01
standard classification number
Standard ICS number:21.060.60;
Standard Classification Number:Machinery>>General Parts>>J15 Pipe Accessories
Publication information
publishing house:China Standards Press
Publication date:1984-04-01
other information
Release date:1983-06-17
Review date:2004-10-14
drafter:Hu Lusheng, Liu Dequan, Cheng Zhenshi, Wang Muqin
Drafting unit:Standardization Institute of the Ministry of Machinery Industry
Focal point unit:Standardization Institute of the Ministry of Machinery Industry
Proposing unit:Ministry of Machinery Industry of the People's Republic of China
Publishing department:National Bureau of Standards
competent authority:China Machinery Industry Federation
Introduction to standards:
GB 3733.2-1983 Compression-end straight-through connector GB3733.2-1983 standard download decompression password: www.bzxz.net
Some standard content:
Marking example:
National Standard of the People's Republic of China
Card sleeve straight-through connector
Stralght thread connector-.-Body12-5
Card sleeve straight-through connector with tube outer diameter D of 14mm: nominal pressure grade,
Connector body 14
GB3733.2—83
National Bureau of Standards 1983-0B-17 issued
UDC 621.643.4
GB3733.2—83
Others V
1884-04-01 implementation
Nominal pressure
Tube outer diameter
M16 ×1.5
M22 ×1.5
M27 ×2
M33×2
M42×2
(M48 × 2)
M50×2
M18 ×1.5
M27×2
M33×2
GB3733.2-83
Note: The dimensions in brackets in the ()d column are only for old products. ②The weight is the calculated value, and the specific gravity is 7.85kg/dm*The technical conditions are in accordance with the provisions of GB3765-83.
M10×1
M12×1.25bZxz.net
M33×2
M36×2
M42×2
M45×2
M48×2
M52×2
M18×1.5
M30 X2
M33×2
M36×2
Nominal size limit deviation Nominal size
Limit deviation
GB 3733.2-83
Nominal size
Limit deviation
kg/100 pieces）
GB 3733.2-83
This standard was proposed by the Ministry of Machinery Industry of the People's Republic of China and is under the jurisdiction of the Standardization Institute of the Ministry of Machinery Industry. This standard was drafted by the Standardization Institute of the Ministry of Machinery Industry at its own expense. Yangzhong Heavy Machinery, Chongqing Heavy Automobile Research Institute, Dalian Combined Machine Tool Research Institute, Zhejiang Haipan County Pipe Fittings Factory, Shanghai No. 1 Mechanical and Electrical Bureau Technology Information Photographic Institute, and the 78th Institute of the Ministry of Aerospace participated in the drafting. The main drafters of this standard are Hu Shansheng, Liu Dequan, Cheng Zhenshi, and Wang Muqin: From the date of implementation of this standard, the original departmental standard B163-7 "Card sleeve end straight-through connector" will be invalid:
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.