This standard is formulated for the first time. This standard specifies the equipment, number of samples, sample preparation, test steps and test reports for the top lifting test of flexible, composite, rigid plastic and metal intermediate bulk containers for dangerous goods. This standard is applicable to the top lifting test of flexible, composite, rigid plastic and metal intermediate bulk containers for dangerous goods. This standard corresponds to the United Nations "Recommendations on the Transport of Dangerous Goods Model Regulations" and is not equivalent to it. Its relevant technical content is completely consistent with the above manual, and the standard text format has been edited according to GB/T1.1-2000. GB/T 21589-2008 Top lifting test method for intermediate bulk containers for dangerous goods GB/T21589-2008 Standard download decompression password: www.bzxz.net
This standard is formulated for the first time. This standard specifies the equipment, number of samples, sample preparation, test steps and test reports for the top lifting test of flexible, composite, rigid plastic and metal intermediate bulk containers for dangerous goods. This standard is applicable to the top lifting test of flexible, composite, rigid plastic and metal intermediate bulk containers for dangerous goods. This standard corresponds to the United Nations "Recommendations on the Transport of Dangerous Goods Model Regulations" and is not equivalent to it. Its relevant technical content is completely consistent with the above manual, and the standard text format has been edited according to GB/T1.1-2000.
This standard corresponds to the United Nations "Recommendations on the Transport of Dangerous Goods Model Regulations" and is not equivalent to it. Its relevant technical content is completely consistent with the above manual, and the standard text format has been edited according to GB/T1.1-2000.
This standard is proposed and managed by the National Technical Committee for Standardization of Dangerous Chemicals Management (SAC/TC251).
The responsible drafting unit of this standard: Tianjin Institute of Inspection and Quarantine Science and Technology.
Participating drafting units of this standard: Jiangnan University, Sinochem Chemical Standardization Research Institute, Tianjin Entry-Exit Inspection and Quarantine Bureau.
The main drafters of this standard are Feng Zhixie, Wang Libing, Xu Chuanlai, Xiong Zhongqiang, Wang Xiaobing and Zhao Lihua. This standard
is formulated for the first time.
The clauses in the following documents become the clauses of this standard through reference in this standard. For all dated referenced documents, all subsequent amendments (excluding errata) or revisions are not applicable to this standard. However, the parties who reach an agreement based on this standard are encouraged to study whether the latest versions of these documents can be used. For all undated referenced documents, the latest versions are applicable to this standard.
GB/T4122.1 Fundamentals of packaging terminology
GB19433.1 General safety regulations for inspection of dangerous goods packaging for air transport
GB19434.1 General safety regulations for inspection of intermediate bulk containers for dangerous goods
GB19434.4 Safety regulations and performance test for inspection of flexible intermediate bulk containers for dangerous goods
GB19434.5 Safety regulations and performance test for inspection of metal intermediate bulk containers for dangerous goods
GB19434.6 Safety regulations and performance test for inspection of composite intermediate bulk containers for dangerous goods
GB19434.8 Safety regulations and performance test for inspection of rigid plastic intermediate bulk containers for dangerous goods

ICS 13. 300
National Standard of the People's Republic of China
GB/T 21589-2008
Dangerous goods
Test method for top lift of intermediate bulk containers (IBCs)2008-04-01Promulgated
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of ChinaStandardization Administration of the People's Republic of China
2008-09-01Implementation
GB/T21589—2008
This standard corresponds to the United Nations "Recommendations on the Transport of Dangerous Goods Model Regulations" and is not equivalent to it. Its relevant technical contents are completely consistent with the above manual, and the standard text format has been edited according to GB/T1.1-2000. This standard is proposed and managed by the National Technical Committee for Standardization of Dangerous Chemicals Management (SAC/TC251). The responsible drafting unit of this standard is Tianjin Institute of Inspection and Quarantine Science and Technology. The participating drafting units of this standard are Jiangnan University, Sinochem Chemical Standard Promotion Institute, and Tianjin Entry-Exit Inspection and Quarantine Bureau. The main drafters of this standard are Feng Zhile, Wang Libing, Gu Chuanlai, Xiong Zhongqiang, Wang Xiaobing, and Zhao Lihua. This standard is formulated for the first time.
1 Scope
Top lifting test method of intermediate bulk containers for dangerous goods
GB/T 21589—2008
This standard specifies the equipment, number of samples, sample preparation, test steps and test report for the top lifting test of flexible, composite, rigid plastic and metal intermediate bulk containers for dangerous goods. This standard is applicable to the top lifting test of flexible, composite, rigid plastic and metal intermediate bulk containers for dangerous goods. 2 Normative references
The provisions in the following documents become the provisions of this standard through reference in this standard. For dated references, all subsequent amendments (excluding errata) or revisions are not applicable to this standard. However, parties to agreements based on this standard are encouraged to investigate whether the latest versions of these documents can be used. For undated references, the latest versions apply to this standard. GB/T 4122.1 Basics of Packaging Terminology
GB19433.1 General Safety Rules for Inspection of Dangerous Goods by Air Transport GB19434.1 General Safety Rules for Inspection of Intermediate Bulk Containers for Dangerous Goods GB19434.4 Safety Rules for Inspection of Flexible Intermediate Bulk Containers for Dangerous Goods Performance Test GB19434.5 Safety Rules for Inspection of Metal Intermediate Bulk Containers for Dangerous Goods Performance Test GB19434.6 Safety Rules for Inspection of Composite Intermediate Bulk Containers for Dangerous Goods Performance Test GB19434.8 Safety Rules for Inspection of Rigid Plastic Intermediate Bulk Containers for Dangerous Goods Performance Test 3 Terms and Definitions
The terms and definitions established in GB/T 4122.1 and CB19434.1. and the following terms and definitions apply to this standard. 3.1
Intermediate hulk containers (IBCs) are also called intermediate bulk cargo containers. They refer to rigid or flexible portable containers outside the scope of GB19433.1. These containers: a) have the following capacity:
: - not more than 30m3 for solids and liquids of Class II and sub-class packaging; - not more than 1.5m3 for solids of Class I packaging in flexible, rigid plastic, composite, fiberboard and wooden intermediate bulk containers;
not more than 3.0m3 for solids of Class I packaging in metal intermediate bulk containers; b) designed for mechanical loading and unloading;
able to withstand the stress generated during loading and unloading and transportation, which should be determined by test. 3.2
Body
The container itself, including the opening and its closing device, but excluding auxiliary equipment. Applicable to all types of intermediate hulk containers except composite intermediate bulk containers.
Handling device
All kinds of lifting rings, loops, hooks and frames fixed on the body of the intermediate bulk container or extended from the body material. Applicable to flexible 1
GB/T21589—2008
intermediate bulk container,
maximum permissible gross mass maximum permissible gross mass the mass of the shell and its auxiliary equipment and structural devices plus the maximum permissible loading mass (applicable to all types of intermediate bulk containers except flexible bulk bags).
4Test equipment
Crane or other equivalent test equipment.
5Test procedure
5.1Test preparation
5.1.1Metal, rigid plastic and composite intermediate bulk containers shall be filled and loaded with an evenly distributed load. The mass of the filled intermediate bulk container and the load shall be twice the maximum permissible gross mass. 5.1.2 Flexible intermediate bulk containers shall be filled to six times their maximum permissible total mass, with the load evenly distributed. 5.2 Number of test specimens
The number of test specimens shall be three.
5.3 Test procedures
5.3.1 For the test of flexible intermediate bulk containers for dangerous goods, see GB19434.4; 5.3.2 For the test of metal intermediate bulk containers for dangerous goods, see GB19434.5; 5.3.3 For the test of composite intermediate bulk containers for dangerous goods, see GB19434.65.3.4 For the test of rigid plastic intermediate bulk containers for dangerous goods, see GB19434.8.6 Test report
Name, quantity, size and specifications of the test sample; Name of the manufacturer;
Pretreatment temperature, relative humidity and pretreatment time; - Test equipment: Www.bzxZ.net
- Record of test results, and any phenomena observed during the test that help to explain the test results; - Explanation of the differences between the test method used and that of this standard; Test date, signature of the tester, and seal of the testing unit. 2
GB/T 21589-2008
People's Republic of China
National Standard
Top of Intermediate Bulk Container for Dangerous Goods
Lifting Test Method
GB/T 21589-200B
Published and distributed by China Standards Press
No. 16, Sanlihebei Street, Fuxingmenwai, Beijing
Postal Code: 100045
Website: www, spc. net. cn
Tel: 6852394668517548
Printed by China Standards Press Qinhuangdao Printing Factory Distributed by Xinhua Bookstores in various places
Format: 80×1230 1/16 printing sheet 0.5 word count 5,000 words First edition in June 2008
First printing in June 2008
Book number: 155066·1-31817 Cage price 10.00 yuan If there is any printing error
It will be replaced by our publishing center
Copyright exclusive Infringement will be investigated
Report phone: (010)68533533
800685
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.