This standard specifies the classification, requirements, test methods, inspection rules and marking, packaging, transportation and storage of paper barrels. This standard applies to the design, production, inspection and testing of paper barrels for transport packaging. This standard does not apply to paper barrels for packaging that are in direct contact with food or medicine. This standard replaces GB/T14187-1993 "Paper barrels for packaging containers". Compared with GB/T14187-1993, this standard has the following major changes: - The scope has been added with "This standard applies to the design, production, inspection and testing of all types of paper barrels for transport packaging" and "This standard does not apply to paper barrels for packaging that are in direct contact with food or medicine"; - The product classification has been changed to 3 levels according to the severity of the storage and transportation circulation environment; - The product categories have been deleted; - The preferred size of the maximum outer diameter of the paper barrel closure has been deleted; - The inspection item of the maximum outer diameter of the closure has been deleted; - The inspection item of the inner diameter of the paper barrel has been added; - The drop height requirement in the drop resistance performance has been modified. GB/T 14187-2008 Paper barrels for packaging containers GB/T14187-2008 standard download decompression password: www.bzxz.net
This standard specifies the classification, requirements, test methods, inspection rules and marking, packaging, transportation and storage of paper barrels. This standard applies to the design, production, inspection and testing of paper barrels for transport packaging. This standard does not apply to paper barrels for packaging that directly contact food and medicine.
This standard replaces GB/T14187-1993 "Paper barrels for packaging containers".
Compared with GB/T14187-1993, the main changes of this standard are as follows:
--- The scope adds that this standard is applicable to the design, production, inspection and testing of various types of paper barrels for transport packaging and that this standard is not applicable to paper barrels for direct contact with food and medicine packaging;
--- The product classification is changed to 3 levels according to the severity of the storage and transportation circulation environment;
--- The product categories are deleted;
--- The preferred size of the maximum outer diameter of the paper barrel closure is deleted;
--- The inspection item of the maximum outer diameter of the closure is deleted;
--- The inspection item of the inner diameter of the paper barrel is added;
--- The drop height requirement in the drop resistance performance is modified.
This standard is proposed by the China Packaging Federation.
This standard is under the jurisdiction of the National Technical Committee for Packaging Standardization.
The drafting units of this standard are: Shenzhen Meiyingsen Environmental Protection Technology Co., Ltd., China Packaging Research and Testing Center, China Packaging Federation, Shenzhen Vocational and Technical College.
The main drafters of this standard are: Yang Wei, Cai Shaoling, Niu Shumei, Wang Lijie, Luo Chen, Yuan Wenguang, Wang Haiyan.
The previous versions of the standards replaced by this standard are:
---GB/T14187-1993.
The clauses in the following documents become the clauses of this standard through reference in this standard. For all dated referenced documents, all subsequent amendments (excluding errata) or revisions are not applicable to this standard. However, the parties to the agreement based on this standard are encouraged to study whether the latest versions of these documents can be used. For all undated referenced documents, the latest versions are applicable to this standard.
GB/T2828.1 Sampling inspection procedures for measurement Part 1: Sampling plan for batch inspection based on acceptance quality limit (AQL) (GB/T2828.1-2003, ISO2859-1:1999, IDT)
GB/T4857.1 Method of marking various parts during testing of packaging and transport packages
GB/T4857.3 Packaging and transport packages Part 3: Static load stacking test method
GB/T4857.5 Drop test method for packaging and transport packages

ICS 55.140
People's Republic of China Standard Standard
GB/14187—2008
Generation GB/T14187--1993
Packing containers
Packing comtainers---Fibre drum2008-07-18Published
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China Standardization Administration of China
2009-01-01Implementation
People's Republic of China Standard Standard
Packing containers---Fibre drum
GB/T 141872008
Published and distributed by China Standards Press
No. 16, Hebei Street, Lanli, Fuxingmenwai, Beijing
Postal Code: 100045
[Website spc. net. cnbZxz.net
Tel: 68523916
68517548
China Standards Press Qinhuangdao Aoguang Printing
Distributed by Xinhua Bookstores everywhere
π木880×1230 1/16
Printing sheet 0.5
Study number 10000
First edition in October 2008 First printing in October 2008# No.: 155066: 133941:
Exchange by the distribution center of this company
If there is any printing error
Copyright infringement will be investigated
Report telephone: (010) 68533533
This standard replaces GB/T14187
1993 "Paper barrel for packaging containers".
Compared with GB/T14187--1993, this standard has the following changes: CB/T14187--2008
added "This standard applies to the design, production, inspection and testing of all types of paper barrels for transport packaging" and "This standard does not apply to paper barrels for direct contact with food and medicine packaging" in the scope; the product classification is changed to 3 levels according to the severity of the storage and transportation circulation environment; the product categories are deleted;
- The preferred size of the maximum outer diameter of the paper closure is deleted; ... The maximum outer diameter inspection item of the closure is deleted; the paper inner diameter inspection item is added;
The drop height requirement in the anti-drop performance is modified. This standard is proposed by the China Packaging Federation. This standard is under the jurisdiction of the National Packaging Standardization Technical Committee. The drafting units of this standard: Shenzhen Meiyingsen Environmental Protection Technology Co., Ltd., China Packaging Research and Testing Center, China Packaging Federation, Shenzhen Vocational and Technical College.
The main drafters of this standard are: Yang Wei, Cai Shaoling, Niu Shumei, Wang Lijie, Luo Chen, Shuai Wenguang, Tu Haiai. The previous versions of the standards replaced by this standard are: -GB/T14187-1993,
1 Scope
Packaging containers
GB/T 14187-2008
This standard specifies the classification, requirements, test methods, inspection rules and marking, packaging, transportation and storage of paper barrels. This standard is applicable to the design and inspection of paper barrels for transport packaging. This standard does not apply to paper barrels for packaging that directly contact food and drugs. 2 Normative references
It is a reference document with a specified period, and the clauses in all the following documents are generally used as the clauses of this standard. The amendments (excluding revisions or revisions) of these documents may be used in their latest versions, including sample inspection GB/T 2828.1 (GB/T 2828.I--G3/1 485741/ISO285 German shipping container GB/T485 shipping container CB/T 485 Terms and definitions The following terms apply to this standard: fiber drums Only those made of paper or board adhesive. Closure Closure The closure of the container mouth. drum band
are not applicable to non-banana, however, the parties who reach an agreement based on this standard are encouraged to study the latest version and apply this standard.
Gland (AQ valve inspection and tightening sodium batch inspection sampling plan inspection parts
Part 3: Static load recommendation
To enhance the strength of paper barrels, fixed on the line official ring 4 structure, classification and code
4.1 Structure
The structure of paper barrels is shown in Figure 1.
The test is a rigid round barrel with a bottom and a lid made by the method
, according to GB/T 14187—2008
-barrel cover;
tree closure:
3-----upper hoop:
-——barrel body;
lower hoop;
one bottom,
4.2 Grading
Figure 1 Schematic diagram of paper barrel structure
Paper barrels are divided into 3 levels according to the circulation environment, see Table 1. Table 1 Paper barrel grading
4.3 Code
ZT-X-XX
ZT: "Paper barrel" Chinese phonetic letter
X-XX. Paper barrel level-maximum volume of paper barrel. 5 Requirements
5.1 Appearance
Appearance requirements of paper barrels are shown in Table 2.
Round curling
Closer
Table 2 Appearance
Flow environment
Main Mainly used in storage and transportation with relatively bad circulation environment, mainly used in the situation of good circulation environment
Mainly used for short-distance and low-cost goods transportation packaging requirements
Paper barrels should be round, without obvious defects such as loss, concave, skew, etc.; smooth, no light damage, no wrinkles, no debonding; paint coating is even, no condensation, no bubbles, no obvious sagging
Firm and flat. Metal barrels should not have burn-through or cold welding, no obvious rust, peeling and cracking, galvanized barrels should be bright, no shedding
Firm connection, flexible opening and closing, good sealing of the barrel body, galvanized closure should be bright, no falling pattern, clear and even, firmly attached
Paper barrels are clean inside and outside, without obvious pollution
5.2 Dimensions and limit deviations
Paper barrels Dimensions and limit deviations are shown in Table 3
5. 3 Physical and mechanical properties
5.3.1 Stacking performance
The requirements for stacking performance of paper barrels are shown in Table 1.
Anti-falling load
Stacking load/N
The requirements for anti-falling performance of paper barrels are shown in Table 5.
Test method
Drop height/mm
Table 3 Dimensional deviation
Table 4 Stacking performance requirements
Limit deviation
GB/T 14187—2008
Unit is dissolved rice
24 No leakage, no cracking, and permanent deformation should not affect the stacking ability of paper barrels. Table 5 Anti-drop performance requirements
No leakage, no cracking, and the closure does not open.
6.1 Standard environment for sample conditioning and testing The standard environment for sample conditioning and testing is 23℃±2\C and 50%±5% relative humidity. The sample pre-treatment is completed under this condition. Stacking and drop tests should be carried out with actual contents as much as possible. Simulants should be used. The barrel should be filled with a mixture of sand and sawdust to reach 95% of the specified volume and sealed. The leakage of the mixture should be consistent with the sample pre-treatment conditions.
6.2 Appearance inspection
The appearance of the paper barrel should be tested under natural light. 6.3 Dimension inspection
The dimensional tolerance of the paper barrel is 1mm. Universal measuring tools are used for testing. 6.4 Stacking and drop performance
6.4.1 The stacking test shall be conducted in accordance with GB/T4857.3, and the number of tests shall be 3. 6.4.2 Drop test The samples shall be marked in accordance with GB/T4857.1 and tested in accordance with GB/T4857.5. First, the bottom edge of each barrel shall be placed against the ground at a certain point, and then the top and outer edge of each barrel shall be placed against the ground at a point adjacent to the closure handle. The number of tests shall be 3. Inspection rules
7.1 Inspection classification
7.1. 1 Factory inspection
Inspect the appearance, size specifications and limit deviations of the products in accordance with the requirements of 5.1 and 5.2. GB/g 14187--2008
7. 1.2 Type inspection
The type inspection items are all the items specified in 5. When one of the following situations occurs, type inspection should be carried out: when new products or old products are transferred to the factory for trial production and appraisal; a)
b) After normal production, if there are major changes in materials, structures, and processes that may affect product performance; during normal production, it should be carried out once a year;
d) When production is resumed after a long-term suspension of 6 months; when the inspection results are significantly different from the last type inspection; e
f) When the national quality supervision and inspection agency requires type inspection. 7.2 Sampling
7.2.1 Batch
Products are inspected and accepted in batches. The same variety, the same specification, and the daily output are...Inspection batch 7.2.2 Sampling plan
7.2.2.1 Appearance and dimensional deviations shall be based on (IB/T 2828.1, using special inspection level S-3, qualified quality level AQL=10, positive belt inspection one sampling plan.
7.2.2.2 Paper barrels used for packaging unit transportation, those that do not meet the standard cannot be used for packaging unit transportation, 7.2.2.3 The sampling plan for stacking performance and drop performance inspection in physical and mechanical properties is shown in Table 6. Table 6 Sampling plan for stacking performance and drop performance inspection No.
7.3 Judgment rules
Stacking performance
Drop performance
Sample size
7.3.1 Appearance and dimensional deviation inspection Follow 5.1.5.2 to make a single judgment. If it meets the standard requirements: then the item is judged as qualified. If all the above items are qualified, the appearance and dimensional deviation of the sample are qualified. 7.3.2 Physical and mechanical properties inspection shall be carried out in accordance with the provisions of 5.3 for single determination and critical determination according to Table 6. 7.3.3 If all physical and mechanical properties are qualified, the batch of products shall be determined to be qualified. If unqualified items are found, the batch of type inspection shall be determined to be unqualified. 8 Marking, packaging, transportation and storage
8.1 Marking
The paper barrels leaving the factory shall be marked and stamped with the production date according to the user's requirements. 8.2 Packaging
When necessary, the paper barrels shall be packaged according to the user's requirements. 8.3 Transportation and storage
The products shall be stored and transported away from rain, exposure, moisture and pollution, and shall be protected from scratches by sharp objects. Moisture-proof facilities shall be provided during storage. Copyright reserved. Infringement shall be investigated
Book number: 1550661-33941
GB/T 14187-2008
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.