Some standard content:
ICS35.060
Machinery Industry Standard of the People's Republic of China
JB/T10334—2002
Test chart for laser printer (A4)
Test chart for laser printer (A4)2002-07-16Released
2002-12-01Implemented
Released by the State Economic and Trade Commission of the People's Republic of ChinaForeword,
2 Specifications Reference documents.
3 Technical requirements.
3.1 Basic requirements
Laser printer test version - comprehensive version.
Laser printer test version -
Laser printer test version
Usage method
All black version
Consumable version
Print output image quality evaluation method
Image density
Density unevenness
Level,
Resolution.
Fixing firmness,
Effective format
Toner (developer) consumption
Operation test, life test and reliability test resolution and resolution comparison table
Laser printer test version
Laser printer test version
Figure 3 Laser printer test version
Figure 4 Laser printer test version
Laser printer test version
Laser printer test version
Laser printer test version
Comprehensive version pattern..
Comprehensive version structure diagram
All black version pattern.
All black Plate structure diagram
Consumption plate pattern
Consumption plate structure diagram,
Comprehensive plate resolution diagram
JB/T10334—2002
JB/T103342002
The National Technical Committee for Standardization of Copying Machinery (CSBTSTC147) organizes the formulation of national standards and industry standards for the copying machinery industry. The copying machinery products, supporting parts and consumables manufacturing enterprises, scientific and technological research units, design departments, marketing departments and users in China have the right to participate in this technical committee and participate in the formulation and revision of relevant standards through this technical committee. This standard is proposed by the China Machinery Industry Federation. This standard is under the jurisdiction of the National Technical Committee for Standardization of Copying Machinery. The responsible drafting units of this standard are: China HP Co., Ltd., Lenovo (Beijing) Co., Ltd. The participating drafting units of this standard are: Ricoh (Shenzhen) Industrial Development Co., Ltd., Shanghai Fuji Xerox Copier Co., Ltd., Tianjin Copy Technology Research Institute, and Tianjin Copy Equipment Company. The main drafters of this standard are: Bi Mingzhu, Lin Haigang, Qian Lei, Shi Wen, Liu Shengying, Yan Jiansheng, Li Shengli, Wang Jianhua, Zhou Fuqi, Pang Yan.
1 Scope
Laser printer test version (A4)
JB/T10334—2002
This standard specifies the technical requirements, usage methods and print output image quality evaluation methods of the laser printer test version (A4). This standard applies to the testing and evaluation of monochrome, black laser printers or laser printer black image quality. The laser printer test version consists of three parts: comprehensive version, all black version, and consumption version. 2 Normative references
The clauses in the following documents become clauses of this standard through reference in this standard. For any dated referenced document, all subsequent amendments (excluding errata) or revisions are not applicable to this standard. However, parties to an agreement based on this standard are encouraged to study whether the latest versions of these documents can be used. For any undated referenced document, the latest version shall apply to this standard. GB/T10073 Method for evaluating image quality of electrostatic copies JB/T6154 Test method for developer consumption of electrostatic copiers 3 Technical requirements
3.1 Basic requirements
The test version specified in this standard is printed by the "Laser Printer Test" application, and the "Laser Printer Test" application is stored in a CD.
3.2 Laser Printer Test Version
—Comprehensive Version
3.2.1 Pattern and Structure Diagram
The pattern of the comprehensive version is shown in Figure 1, and the structure diagram of the comprehensive version is shown in Figure 2. The effective format of the comprehensive version is 281mm×196mm. 3.2.2 Effect Diagram
The effect diagram of the comprehensive version is a circular ray diagram (the pattern marked with number 11 in Figure 2) and a circular grid ray diagram (the pattern marked with number 12 in Figure 2), both with a diameter of 30mm.
3.2.3 Grayscale (layers)
The grayscale of the integrated version is 16 levels, arranged horizontally from left to right (the pattern labeled 7 in Figure 2). 3.2.4 Solid circle
The diameter of the solid circle of the integrated version is 6mm (the pattern labeled 6 in Figure 2), and there are six of them. 3.2.5 Resolution diagram
The resolution diagram of the integrated version is at the left, middle and right positions (the pattern labeled 4 in Figure 2), each of which consists of 6 rows and 6 columns, a total of 36 groups of black and white lines with different spatial frequencies and a length of 4mm (see Figure 7). When the printer is set to 300dpi, 600dpi and 1200dpi, the resolution and resolution of the patterns in the 3rd and 4th rows are compared in Table 1. Table 1 Resolution and resolving power comparison table
Resolution
1200dpi
600dpi
300dpi
1st column
24 line pairs/mm
12 line pairs/mm
6 line pairs/mm
2nd column
12 line pairs/mm
6 line pairs/mm
3 line pairs/mm
Resolution
3rd column
8 line pairs/mm
4 line pairs/mm
2 line pairs/mm
Note: The column numbers in the table correspond to the order of the line groups from left to right in the resolution diagram. 4th column
6 line pairs/mm
3 line pairs/mm
1.5 line pairs/mm
5th column
5 line pairs/mm
2.5 line pairs/mm
1.2 line pairs/mm
6th column
4 line pairs/mm
2 line pairs/mm
1 line pair/mm
JB/T10334—2002||tt ||Laser printer comprehensive test version (A4)
Song Song Song Song Song Song Song
Kai Kai Kai Kai Kai Kai Kai Kai Kai Kai Kai Kai
Black and white Black ... 6L
DATE:01-7-16
GROUP:No.3
T:25℃RH:55%
PIXEL:600
CSBTS/TC147
All rights reserved by National Technical Committee for Standardization of Copying Machinery
Copying is prohibited
Figure 1 Laser Printer Test Version Comprehensive Version Pattern Horizontal Uniform Lines: 3-
First Header Word: 2—
JB/T10334—2002
—Vertical Uniform Lines: 4 Resolution Diagram: 5—Tooth Profile Resolution Diagram: 6 Solid Circle: 7—Gray Scale: 8 Recording Area: 9 Image Area: 10— End of publication: 11——Circular ray effect diagram: 12-Circular grid ray effect diagram: 13——Text area: 14——Reverse text area Figure 2 Laser printer test version-comprehensive version structure diagram JB/T10334--2002
3.2.6 Tooth profile resolution diagram
Comprehensive version tooth profile resolution diagram (the pattern marked with number 5 in Figure 2) is composed of five groups of mutually perpendicular lines at the left, middle and right of the comprehensive version. 3.2.7 Uniform line diagram
Comprehensive version uniform line diagram is composed of lines with a length of 6mm and a spatial frequency of 3 line pairs/mm at the top (the pattern marked with number 2 in Figure 2) and the left (the pattern marked with number 3 in Figure 2) of the comprehensive version. 3.2.8 Image area
The image area of the comprehensive version (the pattern marked with number 9 in Figure 2) is a 68mm×80mm picture. 3.2.9 Text area
The text area of the comprehensive version (the pattern marked 13 in Figure 2) consists of a group of Chinese characters of different sizes and fonts. 3.2.10 Background
The comprehensive version is a blank area except for the test pattern. 3.2.11 Header
The header of the comprehensive version (the pattern marked 1 in Figure 2) is 25-pound Song font. 3.2.12 Recording area
The recording area of the comprehensive version (the pattern marked 8 in Figure 2) is 13-pound Song font. 3.2.13 Footer
The footer of the comprehensive version (the pattern marked with number 10 in Figure 2) is in 14-pound boldface. 3.2.14 Reverse text area
The reverse text area of the comprehensive version (the pattern marked with number 14 in Figure 2) is in 24-pound reverse boldface. 3.3 Laser printer test version—
All black version
3.3.1 Pattern and structure diagram
The pattern of the all black version is shown in Figure 3, and the structure diagram of the all black version is shown in Figure 4. The maximum format of the all black version is 297mm×210mm. 3.3.2 Header
The header of the all black version (the pattern marked with number 1 in Figure 4) is in 25-pound reverse redface. 3.3.3 Recording area
The recording area of the all black version (the pattern marked with number 2 in Figure 4) is in 13-pound Song font. 3.3.4 Reverse text area
The reverse text area of the full black version (the pattern marked with number 3 in Figure 4) is in 24-pound reverse black font. 3.3.5 Footer
The footer of the full black version (the pattern marked with number 4 in Figure 4) is in 14-pound reverse black font. 3.4 Laser printer test version consumable version
3.4.1 Pattern and structure diagram
The pattern of the consumable version is shown in Figure 5, and the structure diagram of the consumable version is shown in Figure 6. The effective format of the consumable version is 281mm×196mm. 3.4.2 Image coverage
The image coverage of the consumable version is 5%.
3.4.3 Header
The header of the consumable version (the pattern marked with number 1 in Figure 6) is in 25-pound Song font. 3.4.4 E character area
E character area of the consumption version (the pattern marked as 2 in Figure 6) is in 10-pound Song font. 3.4.5 Record area
Record area of the consumption version (the pattern marked as 3 in Figure 6) is in 13-pound Song font. 3.4.6 Text area
Text area of the consumption version (the pattern marked as 4 in Figure 6) is in 24-pound bold font. 3.4.7 Footer
Footer of the consumption version (the pattern marked as 5 in Figure 6) is in 14-pound bold font. 4
一All black version
Laser printer test version 1
JB/10334-—2002
Machine model: HPLaserJetol
Test date: 01-9-14, Batch number: Batch 2 Temperature: 18℃ Relative humidity: 55% Correction rate: kdp
CSBTS/TC 147
All rights reserved by National Technical Committee for Standardization of Copying Machinery
Copying is subject to prosecution
Figure 3 Laser printer test version
Full black version pattern
JB/T10334—2002
JB/T10334—2002
Header word: 2—Recording area: 3—Reverse text area: 4—End word Figure 4 Laser printer test version—Full black version structure diagramEEEEEEEEE
EEEEEEEEE
EEEEEEEEE|| tt||Laser printer test version
Consumable version
JB/T103342002
EEEEEEEEE
EEEEEEEEE
EEEEEEEEE
EEEEEEEEE
JB/T10334—2002
EEEEEEEEE
EEEEEEEEE
EEEEEEEEE
EEEEEEEE EEEEEEE EE EEEE EE EEEEEEEE EEE EEEE EEEEEEEEEEEEEEE EEEEEE EEEEEE EEEEEEE EE EEEE EE EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE
EEEE EEE EEEEEE EEEEEEE EE EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE
EEEEEE EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE EEEEEE
EEEEEEEEEEEEEEEEEEEEEEEEEEEEEE EEEEEEEEEEEEEEEEEEE
EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE EEBEEE EEEEEEEEE EEEEEE EEE EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE EEEE EEE EEEEEE
EEEEEEEEEEEEEEEE
EEEEE E EE EEEEEEEEEEEEE EEE EEEEEEEEEEEEEE
EEEE EEE EEEEE
Machine model: HPLaserJet6L
Test date: 01-8-16Batch number: Batch 3Temperature: 22℃_Relative humidity: 55%_Resolution: 600dpiCSBTS/TC147
National Technical Committee for Standardization of Copying MachineryAll rights reserved. Copying is prohibited
Figure 5 Laser printer test version - consumable version patternJB/T10334-2002
1Header word: 2-E word area: 3-Record area: 4Text area: 5-end word. Figure 6 Laser printer test version - consumable version structure diagram5
4Usage method
Figure 7 Laser printer test version - comprehensive version resolution diagramFor usage, please refer to the instructions on the CD.
5 Evaluation method of print output image quality
5.1 Image density
Measure the density of the two solid circles in the middle of the composite plate. For evaluation methods, refer to 6.2 of GB/T10073-1996. 5.2 Bottom gray
JB/T10334-2002
Measure the density of the five blank spaces at the upper left, upper right, middle, lower left and lower right of the composite plate. For evaluation methods, refer to 6.3 of GB/T10073. 5.3 Density non-uniformity
Measure the density of the six solid circles on the composite plate and calculate according to the provisions of 6.4 of GB/T10073-1996. 5.4 Gradient
Visually inspect the maximum number of continuous levels in the 16 gray levels on the composite plate. For evaluation methods, refer to 6.6 of GB/T10073-1996. When visual inspection is indistinguishable, use a reflection densitometer to measure, and the density difference between the two levels shall not be less than 0.04. 5.5 Resolution
Use a 10× magnifying glass to check the number of resolution line pairs in the 3rd and 4th lines of the three resolution diagrams on the integrated plate. For evaluation methods, refer to 6.7 of GB/T10073-1996.
5.6 Fixing fastness
Measure the fastness of any of the two solid circles in the middle of the integrated plate. For test and evaluation methods, refer to 6.13 of GB/T10073-1996.
5.7 Effective format
Use a steel ruler with a scale of 0.5mm to measure the effective area of the printed output full black image. For evaluation methods, refer to 6.20 of GB/T10073-1996.
5.8 Toner (Developer) Consumption
Measure the toner consumption according to the method of JB/T6154. 5.9 Operation test, life test and reliability test In the above tests, the comprehensive version and the all-black version are used for sampling inspection, and the consumption version is used during operation.14 Reverse text area
The reverse text area of the comprehensive version (the pattern marked 14 in Figure 2) is 24-pound reverse black font. 3.3 Laser printer test version—
All black version
3.3.1 Pattern and structure diagram
The pattern of the all black version is shown in Figure 3, and the structure diagram of the all black version is shown in Figure 4. The maximum format of the all black version is 297mm×210mm. 3.3.2 Header
The header of the all black version (the pattern marked 1 in Figure 4) is 25-pound reverse Zhu font. 3.3.3 Recording area
The recording area of the all black version (the pattern marked 2 in Figure 4) is 13-pound Song font. 3.3.4 Reverse text area
The reverse text area of the all black version (the pattern marked 3 in Figure 4) is 24-pound reverse black font. 3.3.5 Footer
The footer of the all-black version (the pattern marked with number 4 in Figure 4) is in 14-pound reverse black font. 3.4 Laser Printer Test Version Consumable Version
3.4.1 Pattern and Structure
The pattern of the consumable version is shown in Figure 5, and the structure of the consumable version is shown in Figure 6. The effective format of the consumable version is 281mm×196mm. 3.4.2 Image Coverage
The image coverage of the consumable version is 5%.
3.4.3 Header
The header of the consumable version (the pattern marked with number 1 in Figure 6) is in 25-pound Song font. 3.4.4 E Font Area
The E Font Area of the consumable version (the pattern marked with number 2 in Figure 6) is in 10-pound Song font. 3.4.5 Recording area
Consumable version recording area (the pattern marked as 3 in Figure 6) is in 13-pound Song font. 3.4.6 Text area
Consumable version text area (the pattern marked as 4 in Figure 6) is in 24-pound bold font. 3.4.7 Footer
Consumable version footer (the pattern marked as 5 in Figure 6) is in 14-pound bold font. 4
-All black version
Laser printer test version-
JB/10334--2002
Machine model: HPLaserJetol
Test date: 01-9-14, batch number: Batch 2 Temperature: 18°C Relative humidity: 55% Correction rate: kdp
CSBTS/TC 147
All rights reserved by National Technical Committee for Standardization of Copying Machinery
Copying is subject to prosecution
Figure 3 Laser printer test version
Full black version pattern
JB/T10334—2002
JB/T10334—2002
Header word: 2—Recording area: 3—Reverse text area: 4—End word Figure 4 Laser printer test version—Full black version structure diagramEEEEEEEEE
EEEEEEEEE
EEEEEEEEE|| tt||Laser printer test version
Consumable version
JB/T103342002
EEEEEEEEE
EEEEEEEEE
EEEEEEEEE
EEEEEEEEE
JB/T10334—2002
EEEEEEEEE
EEEEEEEEE
EEEEEEEEE
EEEEEEEE EEEEEEE EE EEEE EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE||EEEE EEE EEEEEEEEEEEEEEEEEEEEEEEEEEEE
EE EEEE EEEEEEEEEEEEEEE EEEEEEEEE EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE
EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE EEEEEEEEEEEEEEEEEEE
EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE EEEEEEEE EEBEEE EEEEEEEEE EEEEEE EEE EE EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE EEEE EEE EEEEEE
EEEEEEEEEEEEEEEE
EEE EEEEE E EE EEEEEEEEEEEEEEEEE EEEEEEEEEEEEEE
EEEE EEE EEEEE
Machine model: HPLaserJet6L
Test date: 01-8-16Batch number: Batch 3Temperature: 22℃_Relative humidity: 55%_Resolution: 600dpiCSBTS/TC147
National Technical Committee for Standardization of Copying MachineryAll rights reserved. Copying is prohibited
Figure 5 Laser printer test version - consumable version patternJB/T10334-2002
1Header word: 2-E word area: 3-Record area: 4Text area: 5-end word. Figure 6 Laser printer test version - consumable version structure diagram5
4Usage method
Figure 7 Laser printer test version - comprehensive version resolution diagramFor usage, please refer to the instructions on the CD.
5 Evaluation method of print output image quality
5.1 Image density
Measure the density of the two solid circles in the middle of the composite plate. For evaluation methods, refer to 6.2 of GB/T10073-1996. 5.2 Bottom gray
JB/T10334-2002
Measure the density of the five blank spaces at the upper left, upper right, middle, lower left and lower right of the composite plate. For evaluation methods, refer to 6.3 of GB/T10073. 5.3 Density non-uniformity
Measure the density of the six solid circles on the composite plate and calculate according to the provisions of 6.4 of GB/T10073-1996. 5.4 Gradient
Visually inspect the maximum number of continuous levels in the 16 gray levels on the composite plate. For evaluation methods, refer to 6.6 of GB/T10073-1996. When visual inspection is indistinguishable, use a reflection densitometer to measure, and the density difference between the two levels shall not be less than 0.04. 5.5 Resolution
Use a 10× magnifying glass to check the number of resolution line pairs in the 3rd and 4th lines of the three resolution diagrams on the integrated plate. For evaluation methods, refer to 6.7 of GB/T10073-1996.
5.6 Fixing fastness
Measure the fastness of any of the two solid circles in the middle of the integrated plate. For test and evaluation methods, refer to 6.13 of GB/T10073-1996.
5.7 Effective format
Use a steel ruler with a scale of 0.5mm to measure the effective area of the printed output full black image. For evaluation methods, refer to 6.20 of GB/T10073-1996.
5.8 Toner (Developer) Consumption
Measure the toner consumption according to the method of JB/T6154. 5.9 Operation test, life test and reliability test In the above tests, the comprehensive version and the all-black version are used for sampling inspection, and the consumption version is used during operation.14 Reverse text area
The reverse text area of the comprehensive version (the pattern marked 14 in Figure 2) is 24-pound reverse black font. 3.3 Laser printer test version—
All black version
3.3.1 Pattern and structure diagram
The pattern of the all black version is shown in Figure 3, and the structure diagram of the all black version is shown in Figure 4. The maximum format of the all black version is 297mm×210mm. 3.3.2 Header
The header of the all black version (the pattern marked 1 in Figure 4) is 25-pound reverse Zhu font. 3.3.3 Recording area
The recording area of the all black version (the pattern marked 2 in Figure 4) is 13-pound Song font. 3.3.4 Reverse text area
The reverse text area of the all black version (the pattern marked 3 in Figure 4) is 24-pound reverse black font. 3.3.5 Footer
The footer of the all-black version (the pattern marked with number 4 in Figure 4) is in 14-pound reverse black font. 3.4 Laser Printer Test Version Consumable Version
3.4.1 Pattern and Structure
The pattern of the consumable version is shown in Figure 5, and the structure of the consumable version is shown in Figure 6. The effective format of the consumable version is 281mm×196mm. 3.4.2 Image Coverage
The image coverage of the consumable version is 5%.
3.4.3 Header
The header of the consumable version (the pattern marked with number 1 in Figure 6) is in 25-pound Song font. 3.4.4 E Font Area
The E Font Area of the consumable version (the pattern marked with number 2 in Figure 6) is in 10-pound Song font. 3.4.5 Recording area
Consumable version recording area (the pattern marked as 3 in Figure 6) is in 13-pound Song font. 3.4.6 Text area
Consumable version text area (the pattern marked as 4 in Figure 6) is in 24-pound bold font. 3.4.7 Footer
Consumable version footer (the pattern marked as 5 in Figure 6) is in 14-pound bold font. 4
-All black version
Laser printer test version-
JB/10334--2002
Machine model: HPLaserJetol
Test date: 01-9-14, batch number: Batch 2 Temperature: 18°C Relative humidity: 55% Correction rate: kdp
CSBTS/TC 147
All rights reserved by National Technical Committee for Standardization of Copying Machinery
Copying is subject to prosecution
Figure 3 Laser printer test version
Full black version pattern
JB/T10334—2002
JB/T10334—2002
Header word: 2—Recording area: 3—Reverse text area: 4—End word Figure 4 Laser printer test version—Full black version structure diagramEEEEEEEEE
EEEEEEEEE
EEEEEEEEE|| tt||Laser printer test version
Consumable version
JB/T103342002
EEEEEEEEE
EEEEEEEEE
EEEEEEEEE
EEEEEEEEE
JB/T10334—2002
EEEEEEEEE
EEEEEEEEE
EEEEEEEEE
EEEEEEEE EEEEEEE EE EEEE EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE||EEEE EEE EEEEEEEEEEEEEEEEEEEEEEEEEEEE
EE EEEE EEEEEEEEEEEEEEE EEEEEEEEE EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE
EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE EEEEEEEEEEEEEEEEEEE
EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE EEEEEEEE EEBEEE EEEEEEEEE EEEEEE EEE EE EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE EEEE EEE EEEEEE
EEEEEEEEEEEEEEEE
EEE EEEEE E EE EEEEEEEEEEEEEEEEE EEEEEEEEEEEEEE
EEEE EEE EEEEE
Machine model: HPLaserJet6L
Test date: 01-8-16Batch number: Batch 3Temperature: 22℃_Relative humidity: 55%_Resolution: 600dpiCSBTS/TC147
National Technical Committee for Standardization of Copying MachineryAll rights reserved. Copying is prohibited
Figure 5 Laser printer test version - consumable version patternJB/T10334-2002
1Header word: 2-E word area: 3-Record area: 4Text area: 5-end word. Figure 6 Laser printer test version - consumable version structure diagram5
4Usage method
Figure 7 Laser printer test version - comprehensive version resolution diagramFor usage, please refer to the instructions on the CD.
5 Evaluation method of print output image quality
5.1 Image density
Measure the density of the two solid circles in the middle of the composite plate. For evaluation methods, refer to 6.2 of GB/T10073-1996. 5.2 Bottom gray
JB/T10334-2002
Measure the density of the five blank spaces at the upper left, upper right, middle, lower left and lower right of the composite plate. For evaluation methods, refer to 6.3 of GB/T10073. 5.3 Density non-uniformity
Measure the density of the six solid circles on the composite plate and calculate according to the provisions of 6.4 of GB/T10073-1996. 5.4 Gradient
Visually inspect the maximum number of continuous levels in the 16 gray levels on the composite plate. For evaluation methods, refer to 6.6 of GB/T10073-1996. When visual inspection is indistinguishable, use a reflection densitometer to measure, and the density difference between the two levels shall not be less than 0.04. 5.5 Resolution
Use a 10× magnifying glass to check the number of resolution line pairs in the 3rd and 4th lines of the three resolution diagrams on the integrated plate. For evaluation methods, refer to 6.7 of GB/T10073-1996.
5.6 Fixing fastness
Measure the fastness of any of the two solid circles in the middle of the integrated plate. For test and evaluation methods, refer to 6.13 of GB/T10073-1996.
5.7 Effective format
Use a steel ruler with a scale of 0.5mm to measure the effective area of the printed output full black image. For evaluation methods, refer to 6.20 of GB/T10073-1996.
5.8 Toner (Developer) Consumption
Measure the toner consumption according to the method of JB/T6154. 5.9 Operation test, life test and reliability test In the above tests, the comprehensive version and the all-black version are used for sampling inspection, and the consumption version is used during operation.2 Header
The full black version header (the pattern marked as 1 in Figure 4) is in 25-pound reverse white Zhuti font. 3.3.3 Recording areabZxz.net
The full black version recording area (the pattern marked as 2 in Figure 4) is in 13-pound Songti font. 3.3.4 Reverse white text area
The full black version reverse white text area (the pattern marked as 3 in Figure 4) is in 24-pound reverse white black font. 3.3.5 Footer
The full black version footer (the pattern marked as 4 in Figure 4) is in 14-pound reverse white black font. 3.4 Laser printer test version Consumable version
3.4.1 Pattern and structure diagram
The pattern of the consumable version is shown in Figure 5, and the structure diagram of the consumable version is shown in Figure 6. The effective format of the consumable version is 281mm×196mm. 3.4.2 Image coverage
The image coverage of the consumable version is 5%.
3.4.3 Header
The header of the consumable version (the pattern marked as 1 in Figure 6) is in 25-pound Song font. 3.4.4 E-character area
The E-character area of the consumable version (the pattern marked as 2 in Figure 6) is in 10-pound Song font. 3.4.5 Record area
The record area of the consumable version (the pattern marked as 3 in Figure 6) is in 13-pound Song font. 3.4.6 Text area
The text area of the consumable version (the pattern marked as 4 in Figure 6) is in 24-pound bold font. 3.4.7 Footer
The footer of the consumable version (the pattern marked as 5 in Figure 6) is in 14-pound bold font. 4
一All black version
Laser printer test version 1
JB/10334-—2002
Machine model: HPLaserJetol
Test date: 01-9-14, Batch number: Batch 2 Temperature: 18℃ Relative humidity: 55% Correction rate: kdp
CSBTS/TC 147
All rights reserved by National Technical Committee for Standardization of Copying Machinery
Copying is subject to prosecution
Figure 3 Laser printer test version
Full black version pattern
JB/T10334—2002
JB/T10334—2002
Header word: 2—Recording area: 3—Reverse text area: 4—End word Figure 4 Laser printer test version—Full black version structure diagramEEEEEEEEE
EEEEEEEEE
EEEEEEEEE|| tt||Laser printer test version
Consumable version
JB/T103342002
EEEEEEEEE
EEEEEEEEE
EEEEEEEEE
EEEEEEEEE
JB/T10334—2002
EEEEEEEEE
EEEEEEEEE
EEEEEEEEE
EEEEEEEE EEEEEEE EE EEEE EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE||EEEE EEE EEEEEEEEEEEEEEEEEEEEEEEEEEEE
EE EEEE EEEEEEEEEEEEEEE EEEEEEEEE EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE
EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE EEEEEEEEEEEEEEEEEEE
EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE EEEEEEEE EEBEEE EEEEEEEEE EEEEEE EEE EE EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE EEEE EEE EEEEEE
EEEEEEEEEEEEEEEE
EEE EEEEE E EE EEEEEEEEEEEEEEEEE EEEEEEEEEEEEEE
EEEE EEE EEEEE
Machine model: HPLaserJet6L
Test date: 01-8-16Batch number: Batch 3Temperature: 22℃_Relative humidity: 55%_Resolution: 600dpiCSBTS/TC147
National Technical Committee for Standardization of Copying MachineryAll rights reserved. Copying is prohibited
Figure 5 Laser printer test version - consumable version patternJB/T10334-2002
1Header word: 2-E word area: 3-Record area: 4Text area: 5-end word. Figure 6 Laser printer test version - consumable version structure diagram5
4Usage method
Figure 7 Laser printer test version - comprehensive version resolution diagramFor usage, please refer to the instructions on the CD.
5 Evaluation method of print output image quality
5.1 Image density
Measure the density of the two solid circles in the middle of the composite plate. For evaluation methods, refer to 6.2 of GB/T10073-1996. 5.2 Bottom gray
JB/T10334-2002
Measure the density of the five blank spaces at the upper left, upper right, middle, lower left and lower right of the composite plate. For evaluation methods, refer to 6.3 of GB/T10073. 5.3 Density non-uniformity
Measure the density of the six solid circles on the composite plate and calculate according to the provisions of 6.4 of GB/T10073-1996. 5.4 Gradient
Visually inspect the maximum number of continuous levels in the 16 gray levels on the composite plate. For evaluation methods, refer to 6.6 of GB/T10073-1996. When visual inspection is indistinguishable, use a reflection densitometer to measure, and the density difference between the two levels shall not be less than 0.04. 5.5 Resolution
Use a 10× magnifying glass to check the number of resolution line pairs in the 3rd and 4th lines of the three resolution diagrams on the integrated plate. For evaluation methods, refer to 6.7 of GB/T10073-1996.
5.6 Fixing fastness
Measure the fastness of any of the two solid circles in the middle of the integrated plate. For test and evaluation methods, refer to 6.13 of GB/T10073-1996.
5.7 Effective format
Use a steel ruler with a scale of 0.5mm to measure the effective area of the printed output full black image. For evaluation methods, refer to 6.20 of GB/T10073-1996.
5.8 Toner (Developer) Consumption
Measure the toner consumption according to the method of JB/T6154. 5.9 Operation test, life test and reliability test In the above tests, the comprehensive version and the all-black version are used for sampling inspection, and the consumption version is used during operation.2 Header
The full black version header (the pattern marked as 1 in Figure 4) is in 25-pound reverse white Zhuti font. 3.3.3 Recording area
The full black version recording area (the pattern marked as 2 in Figure 4) is in 13-pound Songti font. 3.3.4 Reverse white text area
The full black version reverse white text area (the pattern marked as 3 in Figure 4) is in 24-pound reverse white black font. 3.3.5 Footer
The full black version footer (the pattern marked as 4 in Figure 4) is in 14-pound reverse white black font. 3.4 Laser printer test version Consumable version
3.4.1 Pattern and structure diagram
The pattern of the consumable version is shown in Figure 5, and the structure diagram of the consumable version is shown in Figure 6. The effective format of the consumable version is 281mm×196mm. 3.4.2 Image coverage
The image coverage of the consumable version is 5%.
3.4.3 Header
The header of the consumable version (the pattern marked as 1 in Figure 6) is in 25-pound Song font. 3.4.4 E-character area
The E-character area of the consumable version (the pattern marked as 2 in Figure 6) is in 10-pound Song font. 3.4.5 Record area
The record area of the consumable version (the pattern marked as 3 in Figure 6) is in 13-pound Song font. 3.4.6 Text area
The text area of the consumable version (the pattern marked as 4 in Figure 6) is in 24-pound bold font. 3.4.7 Footer
The footer of the consumable version (the pattern marked as 5 in Figure 6) is in 14-pound bold font. 4
一All black version
Laser printer test version 1
JB/10334-—2002
Machine model: HPLaserJetol
Test date: 01-9-14, Batch number: Batch 2 Temperature: 18℃ Relative humidity: 55% Correction rate: kdp
CSBTS/TC 147
All rights reserved by National Technical Committee for Standardization of Copying Machinery
Copying is subject to prosecution
Figure 3 Laser printer test version
Full black version pattern
JB/T10334—2002
JB/T10334—2002
Header word: 2—Recording area: 3—Reverse text area: 4—End word Figure 4 Laser printer test version—Full black version structure diagramEEEEEEEEE
EEEEEEEEE
EEEEEEEEE|| tt||Laser printer test version
Consumable version
JB/T103342002
EEEEEEEEE
EEEEEEEEE
EEEEEEEEE
EEEEEEEEE
JB/T10334—2002
EEEEEEEEE
EEEEEEEEE
EEEEEEEEE
EEEEEEEE EEEEEEE EE EEEE EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE||EEEE EEE EEEEEEEEEEEEEEEEEEEEEEEEEEEE
EE EEEE EEEEEEEEEEEEEEE EEEEEEEEE EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE
EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE EEEEEEEEEEEEEEEEEEE
EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE EEEEEEEE EEBEEE EEEEEEEEE EEEEEE EEE EE EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE EEEE EEE EEEEEE
EEEEEEEEEEEEEEEE
EEE EEEEE E EE EEEEEEEEEEEEEEEEE EEEEEEEEEEEEEE
EEEE EEE EEEEE
Machine model: HPLaserJet6L
Test date: 01-8-16Batch number: Batch 3Temperature: 22℃_Relative humidity: 55%_Resolution: 600dpiCSBTS/TC147
National Technical Committee for Standardization of Copying MachineryAll rights reserved. Copying is prohibited
Figure 5 Laser printer test version - consumable version patternJB/T10334-2002
1Header word: 2-E word area: 3-Record area: 4Text area: 5-end word. Figure 6 Laser printer test version - consumable version structure diagram5
4Usage method
Figure 7 Laser printer test version - comprehensive version resolution diagramFor usage, please refer to the instructions on the CD.
5 Evaluation method of print output image quality
5.1 Image density
Measure the density of the two solid circles in the middle of the composite plate. For evaluation methods, refer to 6.2 of GB/T10073-1996. 5.2 Bottom gray
JB/T10334-2002
Measure the density of the five blank spaces at the upper left, upper right, middle, lower left and lower right of the composite plate. For evaluation methods, refer to 6.3 of GB/T10073. 5.3 Density non-uniformity
Measure the density of the six solid circles on the composite plate and calculate according to the provisions of 6.4 of GB/T10073-1996. 5.4 Gradient
Visually inspect the maximum number of continuous levels in the 16 gray levels on the composite plate. For evaluation methods, refer to 6.6 of GB/T10073-1996. When visual inspection is indistinguishable, use a reflection densitometer to measure, and the density difference between the two levels shall not be less than 0.04. 5.5 Resolution
Use a 10× magnifying glass to check the number of resolution line pairs in the 3rd and 4th lines of the three resolution diagrams on the integrated plate. For evaluation methods, refer to 6.7 of GB/T10073-1996.
5.6 Fixing fastness
Measure the fastness of any of the two solid circles in the middle of the integrated plate. For test and evaluation methods, refer to 6.13 of GB/T10073-1996.
5.7 Effective format
Use a steel ruler with a scale of 0.5mm to measure the effective area of the printed output full black image. For evaluation methods, refer to 6.20 of GB/T10073-1996.
5.8 Toner (Developer) Consumption
Measure the toner consumption according to the method of JB/T6154. 5.9 Operation test, life test and reliability test In the above tests, the comprehensive version and the all-black version are used for sampling inspection, and the consumption version is used during operation.3Header
The masthead of the consumable version (the pattern marked as 1 in Figure 6) is in 25-pound Song font. 3.4.4E character area
The E character area of the consumable version (the pattern marked as 2 in Figure 6) is in 10-pound Song font. 3.4.5Record area
The record area of the consumable version (the pattern marked as 3 in Figure 6) is in 13-pound Song font. 3.4.6Text area
The text area of the consumable version (the pattern marked as 4 in Figure 6) is in 24-pound bold font. 3.4.7Tail
The tail of the consumable version (the pattern marked as 5 in Figure 6) is in 14-pound bold font. 4
一All black version
Laser printer test version 1
JB/10334-—2002
Machine model: HPLaserJetol
Test date: 01-9-14, Batch number: Batch 2 Temperature: 18℃ Relative humidity: 55% Correction rate: kdp
CSBTS/TC 147
All rights reserved by National Technical Committee for Standardization of Copying Machinery
Copying is subject to prosecution
Figure 3 Laser printer test version
Full black version pattern
JB/T10334—2002
JB/T10334—2002
Header word: 2—Recording area: 3—Reverse text area: 4—End word Figure 4 Laser printer test version—Full black version structure diagramEEEEEEEEE
EEEEEEEEE
EEEEEEEEE|| tt||Laser printer test version
Consumable version
JB/T103342002
EEEEEEEEE
EEEEEEEEE
EEEEEEEEE
EEEEEEEEE
JB/T10334—2002
EEEEEEEEE
EEEEEEEEE
EEEEEEEEE
EEEEEEEE EEEEEEE EE EEEE EE EEEEEEEE EEE EEEE EEEEEEEEEEEEEEE EEEEEE EEEEEE EEEEEEE EE EEEE EE EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE
EEEE EEE EEEEEE EEEEEEE EE EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE
EEEEEE EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE EEEEEE
EEEEEEEEEEEEEEEEEEEEEEEEEEEEEE EEEEEEEEEEEEEEEEEEE
EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE EEBEEE EEEEEEEEE EEEEEE EEE EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE EEEE EEE EEEEEE
EEEEEEEEEEEEEEEE
EEEEE E EE EEEEEEEEEEEEE EEE EEEEEEEEEEEEEE
EEEE EEE EEEEE
Machine model: HPLaserJet6L
Test date: 01-8-16Batch number: Batch 3Temperature: 22℃_Relative humidity: 55%_Resolution: 600dpiCSBTS/TC147
National Technical Committee for Standardization of Copying MachineryAll rights reserved. Copying is prohibited
Figure 5 Laser printer test version - consumable version patternJB/T10334-2002
1Header word: 2-E word area: 3-Record area: 4Text area: 5-end word. Figure 6 Laser printer test version - consumable version structure diagram5
4Usage method
Figure 7 Laser printer test version - comprehensive version resolution diagramFor usage, please refer to the instructions on the CD.
5 Evaluation method of print output image quality
5.1 Image density
Measure the density of the two solid circles in the middle of the composite plate. For evaluation methods, refer to 6.2 of GB/T10073-1996. 5.2 Bottom gray
JB/T10334-2002
Measure the density of the five blank spaces at the upper left, upper right, middle, lower left and lower right of the composite plate. For evaluation methods, refer to 6.3 of GB/T10073. 5.3 Density non-uniformity
Measure the density of the six solid circles on the composite plate and calculate according to the provisions of 6.4 of GB/T10073-1996. 5.4 Gradient
Visually inspect the maximum number of continuous levels in the 16 gray levels on the composite plate. For evaluation methods, refer to 6.6 of GB/T10073-1996. When visual inspection is indistinguishable, use a reflection densitometer to measure, and the density difference between the two levels shall not be less than 0.04. 5.5 Resolution
Use a 10× magnifying glass to check the number of resolution line pairs in the 3rd and 4th lines of the three resolution diagrams on the integrated plate. For evaluation methods, refer to 6.7 of GB/T10073-1996.
5.6 Fixing fastness
Measure the fastness of any of the two solid circles in the middle of the integrated plate. For test and evaluation methods, refer to 6.13 of GB/T10073-1996.
5.7 Effective format
Use a steel ruler with a scale of 0.5mm to measure the effective area of the printed output full black image. For evaluation methods, refer to 6.20 of GB/T10073-1996.
5.8 Toner (Developer) Consumption
Measure the toner consumption according to the method of JB/T6154. 5.9 Operation test, life test and reliability test In the above tests, the comprehensive version and the all-black version are used for sampling inspection, and the consumption version is used during operation.3Header
The masthead of the consumable version (the pattern marked as 1 in Figure 6) is in 25-pound Song font. 3.4.4E character area
The E character area of the consumable version (the pattern marked as 2 in Figure 6) is in 10-pound Song font. 3.4.5Record area
The record area of the consumable version (the pattern marked as 3 in Figure 6) is in 13-pound Song font. 3.4.6Text area
The text area of the consumable version (the pattern marked as 4 in Figure 6) is in 24-pound bold font. 3.4.7Tail
The tail of the consumable version (the pattern marked as 5 in Figure 6) is in 14-pound bold font. 4
一All black version
Laser printer test version 1
JB/10334-—2002
Machine model: HPLaserJetol
Test date: 01-9-14, Batch number: Batch 2 Temperature: 18℃ Relative humidity: 55% Correction rate: kdp
CSBTS/TC 147
All rights reserved by National Technical Committee for Standardization of Copying Machinery
Copying is subject to prosecution
Figure 3 Laser printer test version
Full black version pattern
JB/T10334—2002
JB/T10334—2002
Header word: 2—Recording area: 3—Reverse text area: 4—End word Figure 4 Laser printer test version—Full black version structure diagramEEEEEEEEE
EEEEEEEEE
EEEEEEEEE|| tt||Laser printer test version
Consumable version
JB/T103342002
EEEEEEEEE
EEEEEEEEE
EEEEEEEEE
EEEEEEEEE
JB/T10334—2002
EEEEEEEEE
EEEEEEEEE
EEEEEEEEE
EEEEEEEE EEEEEEE EE EEEE EE EEEEEEEE EEE EEEE EEEEEEEEEEEEEEE EEEEEE EEEEEE EEEEEEE EE EEEE EE EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE
EEEE EEE EEEEEE EEEEEEE EE EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE
EEEEEE EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE EEEEEE
EEEEEEEEEEEEEEEEEEEEEEEEEEEEEE EEEEEEEEEEEEEEEEEEE
EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE EEBEEE EEEEEEEEE EEEEEE EEE EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE EEEE EEE EEEEEE
EEEEEEEEEEEEEEEE
EEEEE E EE EEEEEEEEEEEEE EEE EEEEEEEEEEEEEE
EEEE EEE EEEEE
Machine model: HPLaserJet6L
Test date: 01-8-16Batch number: Batch 3Temperature: 22℃_Relative humidity: 55%_Resolution: 600dpiCSBTS/TC147
National Technical Committee for Standardization of Copying MachineryAll rights reserved. Copying is prohibited
Figure 5 Laser printer test version - consumable version patternJB/T10334-2002
1Header word: 2-E word area: 3-Record area: 4Text area: 5-end word. Figure 6 Laser printer test version - consumable version structure diagram5
4Usage method
Figure 7 Laser printer test version - comprehensive version resolution diagramFor usage, please refer to the instructions on the CD.
5 Evaluation method of print output image quality
5.1 Image density
Measure the density of the two solid circles in the middle of the composite plate. For evaluation methods, refer to 6.2 of GB/T10073-1996. 5.2 Bottom gray
JB/T10334-2002
Measure the density of the five blank spaces at the upper left, upper right, middle, lower left and lower right of the composite plate. For evaluation methods, refer to 6.3 of GB/T10073. 5.3 Density non-uniformity
Measure the density of the six solid circles on the composite plate and calculate according to the provisions of 6.4 of GB/T10073-1996. 5.4 Gradient
Visually inspect the maximum number of continuous levels in the 16 gray levels on the composite plate. For evaluation methods, refer to 6.6 of GB/T10073-1996. When visual inspection is indistinguishable, use a reflection densitometer to measure, and the density difference between the two levels shall not be less than 0.04. 5.5 Resolution
Use a 10× magnifying glass to check the number of resolution line pairs in the 3rd and 4th lines of the three resolution diagrams on the integrated plate. For evaluation methods, refer to 6.7 of GB/T10073-1996.
5.6 Fixing fastness
Measure the fastness of any of the two solid circles in the middle of the integrated plate. For test and evaluation methods, refer to 6.13 of GB/T10073-1996.
5.7 Effective format
Use a steel ruler with a scale of 0.5mm to measure the effective area of the printed output full black image. For evaluation methods, refer to 6.20 of GB/T10073-1996.
5.8 Toner (Developer) Consumption
Measure the toner consumption according to the method of JB/T6154. 5.9 Operation test, life test and reliability test In the above tests, the comprehensive version and the full black version are used for sampling inspection, and the consumption version is used during operation.7. The footer of the consumption version (the figure with the label number 5 in Figure 6) is 14-pound boldface. 4. All-black version. Laser printer test version. JB/10334-2002. Machine model: HP Laser Jetol. Test date: 01-9-14, batch number: Batch 2. Temperature: 18°C. Relative humidity: 55%. Correction rate: kdp. CSBTS/TC 147
All rights reserved by National Technical Committee for Standardization of Copying Machinery
Copying is subject to prosecution
Figure 3 Laser printer test version
Full black version pattern
JB/T10334—2002
JB/T10334—2002
Header word: 2—Recording area: 3—Reverse text area: 4—End word Figure 4 Laser printer test version—Full black version structure diagramEEEEEEEEE
EEEEEEEEE
EEEEEEEEE|| tt||Laser printer test version
Consumable version
JB/T103342002
EEEEEEEEE
EEEEEEEEE
EEEEEEEEE
EEEEEEEEE
JB/T10334—2002
EEEEEEEEE
EEEEEEEEE
EEEEEEEEE
EEEEEEEE EEEEEEE EE EEEE EE EEEEEEEE EEE EEEE EEEEEEEEEEEEEEE EEEEEE EEEEEE EEEEEEE EE EEEE EE EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE
EEEE EEE EEEEEE EEEEEEE EE EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE
EEEEEE EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE EEEEEE
EEEEEEEEEEEEEEEEEEEEEEEEEEEEEE EEEEEEEEEEEEEEEEEEE
EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE EEBEEE EEEEEEEEE EEEEEE EEE EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE EEEE EEE EEEEEE
EEEEEEEEEEEEEEEE
EEEEE E EE EEEEEEEEEEEEE EEE EEEEEEEEEEEEEE
EEEE EEE EEEEE
Machine model: HPLaserJet6L
Test date: 01-8-16Batch number: Batch 3Temperature: 22℃_Relative humidity: 55%_Resolution: 600dpiCSBTS/TC147
National Technical Committee for Standardization of Copying MachineryAll rights reserved. Copying is prohibited
Figure 5 Laser printer test version - consumable version patternJB/T10334-2002
1Header word: 2-E word area: 3-Record area: 4Text area: 5-end word. Figure 6 Laser printer test version - consumable version structure diagram5
4Usage method
Figure 7 Laser printer test version - comprehensive version resolution diagramFor usage, please refer to the instructions on the CD.
5 Evaluation method of print output image quality
5.1 Image density
Measure the density of the two solid circles in the middle of the composite plate. For evaluation methods, refer to 6.2 of GB/T10073-1996. 5.2 Bottom gray
JB/T10334-2002
Measure the density of the five blank spaces at the upper left, upper right, middle, lower left and lower right of the composite plate. For evaluation methods, refer to 6.3 of GB/T10073. 5.3 Density non-uniformity
Measure the density of the six solid circles on the composite plate and calculate according to the provisions of 6.4 of GB/T10073-1996. 5.4 Gradient
Visually inspect the maximum number of continuous levels in the 16 gray levels on the composite plate. For evaluation methods, refer to 6.6 of GB/T10073-1996. When visual inspection is indistinguishable, use a reflection densitometer to measure, and the density difference between the two levels shall not be less than 0.04. 5.5 Resolution
Use a 10× magnifying glass to check the number of resolution line pairs in the 3rd and 4th lines of the three resolution diagrams on the integrated plate. For evaluation methods, refer to 6.7 of GB/T10073-1996.
5.6 Fixing fastness
Measure the fastness of any of the two solid circles in the middle of the integrated plate. For test and evaluation methods, refer to 6.13 of GB/T10073-1996.
5.7 Effective format
Use a steel ruler with a scale of 0.5mm to measure the effective area of the printed output full black image. For evaluation methods, refer to 6.20 of GB/T10073-1996.
5.8 Toner (Developer) Consumption
Measure the toner consumption according to the method of JB/T6154. 5.9 Operation test, life test and reliability test In the above tests, the comprehensive version and the all-black version are used for sampling inspection, and the consumption version is used during operation.7. The footer of the consumption version (the figure with the label number 5 in Figure 6) is 14-pound boldface. 4. All-black version. Laser printer test version. JB/10334-2002. Machine model: HP Laser Jetol. Test date: 01-9-14, batch number: Batch 2. Temperature: 18°C. Relative humidity: 55%. Correction rate: kdp. CSBTS/TC 147
All rights reserved by National Technical Committee for Standardization of Copying Machinery
Copying is subject to prosecution
Figure 3 Laser printer test version
Full black version pattern
JB/T10334—2002
JB/T10334—2002
Header word: 2—Recording area: 3—Reverse text area: 4—End word Figure 4 Laser printer test version—Full black version structure diagramEEEEEEEEE
EEEEEEEEE
EEEEEEEEE|| tt||Laser printer test version
Consumable version
JB/T103342002
EEEEEEEEE
EEEEEEEEE
EEEEEEEEE
EEEEEEEEE
JB/T10334—2002
EEEEEEEEE
EEEEEEEEE
EEEEEEEEE
EEEEEEEE EEEEEEE EE EEEE EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE||EEEE EEE EEEEEEEEEEEEEEEEEEEEEEEEEEEE
EE EEEE EEEEEEEEEEEEEEE EEEEEEEEE EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE
EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE EEEEEEEEEEEEEEEEEEE
EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE EEEEEEEE EEBEEE EEEEEEEEE EEEEEE EEE EE EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE EEEE EEE EEEEEE
EEEEEEEEEEEEEE
EEE EEEEE E EE EEEEEEEEEEEEEEEEE EEEEEEEEEEEEEE
EEEE EEE EEEEE
Machine model: HPLaserJet6L
Test date: 01-8-16Batch number: Batch 3Temperature: 22℃_Relative humidity: 55%_Resolution: 600dpiCSBTS/TC147
National Technical Committee for Standardization of Copying MachineryAll rights reserved. Copying is prohibited
Figure 5 Laser printer test version - consumable version patternJB/T10334-2002
1Header word: 2-E word area: 3-Record area: 4Text area: 5-end word. Figure 6 Laser printer test version - consumable version structure diagram5
4Usage method
Figure 7 Laser printer test version - comprehensive version resolution diagramFor usage, please refer to the instructions on the CD.
5 Evaluation method of print output image quality
5.1 Image density
Measure the density of the two solid circles in the middle of the composite plate. For evaluation methods, refer to 6.2 of GB/T10073-1996. 5.2 Bottom gray
JB/T10334-2002
Measure the density of the five blank spaces at the upper left, upper right, middle, lower left and lower right of the composite plate. For evaluation methods, refer to 6.3 of GB/T10073. 5.3 Density non-uniformity
Measure the density of the six solid circles on the composite plate and calculate according to the provisions of 6.4 of GB/T10073-1996. 5.4 Gradient
Visually inspect the maximum number of continuous levels in the 16 gray levels on the composite plate. For evaluation methods, refer to 6.6 of GB/T10073-1996. When visual inspection is indistinguishable, use a reflection densitometer to measure, and the density difference between the two levels shall not be less than 0.04. 5.5 Resolution
Use a 10× magnifying glass to check the number of resolution line pairs in the 3rd and 4th lines of the three resolution diagrams on the integrated plate. For evaluation methods, refer to 6.7 of GB/T10073-1996.
5.6 Fixing fastness
Measure the fastness of any of the two solid circles in the middle of the integrated plate. For test and evaluation methods, refer to 6.13 of GB/T10073-1996.
5.7 Effective format
Use a steel ruler with a scale of 0.5mm to measure the effective area of the printed output full black image. For evaluation methods, refer to 6.20 of GB/T10073-1996.
5.8 Toner (Developer) Consumption
Measure the toner consumption according to the method of JB/T6154. 5.9 Operation test, life test and reliability test In the above tests, the comprehensive version and the all-black version are used for sampling inspection, and the consumption version is used during operation.9 Operation test, life test and reliability test In the above tests, the comprehensive version and the all-black version are used for sampling inspection, and the consumption version is used during operation.9 Operation test, life test and reliability test In the above tests, the comprehensive version and the all-black version are used for sampling inspection, and the consumption version is used during operation.13.
5.7 Effective format
Measure the effective area of the all-black image printed out with a steel ruler with a scale of 0.5mm. For the evaluation method, refer to 6.20 of GB/T10073-1996.
5.8 Toner (developer) consumption
Measure the toner consumption according to the method of JB/T6154. 5.9 Operation test, life test and reliability test In the above tests, the comprehensive version and the all-black version are used for sampling inspection, and the consumption version is used during operation.13.
5.7 Effective format
Measure the effective area of the all-black image printed out with a steel ruler with a scale of 0.5mm. For the evaluation method, refer to 6.20 of GB/T10073-1996.
5.8 Toner (developer) consumption
Measure the toner consumption according to the method of JB/T6154. 5.9 Operation test, life test and reliability test In the above tests, the comprehensive version and the all-black version are used for sampling inspection, and the consumption version is used during operation.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.