Some standard content:
ICS43.020
National Standard of the People's Republic of China
CB16735—2004
Generation GB/T16735--18$7.GB/T167361997Road Vehicle
Vehicle Identification Number (VIN)
Road yehicleVehicle idenlification number (ViN2004-06-21 Issued
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China Standardization Administration
2004-10-01 Implementation
Normalized documents
Technology and definitions
4 Contents and structure of vehicle identification codes
Standardized format and marking position of vehicle identification codes Vehicle manufacturing and marking declaration
Yi Vehicle identification code abbreviation rules
Appendix A (normative appendix)
Appendix B (informative appendix)
Calculation method of inspection digit
Vehicle type connection description
CB16735—20 04
All technical contents of this standard are mandatory. Foreword
GB16735—2004
This standard is based on [ISO3779:1983 Road Vehicle Vehicle Identification Number (VTN) Internal Designation and Format (US-Italy Version)] (ISO4030,1999 Road Vehicle Vehicle Identification Number (VIN) Internal Designation and Format (English Version) and US Code of Federal Regulations Volume 49 CFR49565 Vehicle Channel Code Internal Designation Requirements, CFR40568 Vehicles with Two-stage or Multi-stage Road Regulations, R1>71.115 Basic Requirements for Vehicle Trial Identification Codes> for technical content. At the same time, according to the actual use of vehicle identification codes in my country's vehicle manufacturers, Liu This standard replaces G3/T16785-1997 Vehicle Identification Number (VIN) Location and Location of Road Vehicles and H/TS736.1997 Vehicle Identification Number (VIN) Content and Composition of Road Vehicles. Compared with B/16735-1997 and GB/T16736-1997, the main changes are as follows:
---This standard is a mandatory national standard;
---The first chapter of the normative documents of the original standard quotes the national standards, and the corresponding national standards are quoted in the first chapter of the normative references of this standard.
In the third, fourth and sixth chapters of this edition, the technical requirements of the original version are retained. At the same time, reference CFR493565 "Vehicle Identification Code Requirements" adds specific requirements for W: In Section 7 of this edition, state requirements for vehicle identification codes are added. The appendixes of this standard are normative appendices, and Appendix B is a scientific appendix. This standard is proposed by the China Association of Automobile Manufacturers. This standard is issued by the National Automobile Standardization Technical Committee: China Automobile Technology Research Center. The participating units of this standard: Nanjing Yifeng Automobile Co., Ltd., Xi'an Xiwo Bus Co., Ltd., Zhejiang Qianjiang Automobile Co., Ltd., Jinjiu Group Co., Ltd., FAW Group Technology Center, Dongmin Auto Engineering Research Institute, and BAIC Motor Corporation. This standard is the original author, and the previous editions of the standard that was replaced by the standard are as follows: GB/T 6733-10U7, CB/T 16F36-1997 1 Scope
Vehicle Identification Code (VIN) for Road Vehicles
CB16735-2004
This standard specifies the content and composition of the vehicle identification code, so as to establish a unified road vehicle identification code system in the world: This standard also specifies the location and fixation requirements of the vehicle identification code on the vehicle. This standard is applicable to automobiles, commercial vehicles, motorcycles and light motorcycles specified in GB/T 3730.1203 and GB/T 5359.11996, as well as other vehicles that need to be marked with VIN. 2 Normative references
The clauses in the following documents become the clauses of this standard through reference in the following standards. All references to this standard are subject to all subsequent amendments (excluding those made in the revised version) and all subsequent revisions (excluding those made in the revised version) of this standard. For undated references, the latest version shall apply to this standard. GB/373U12! Terms and definitions of vehicle types (S38331, MO) GB/5359.11995 Motorcycle and light motorcycle terminology vehicle list (neg1503883, 1977) G31G737-30) 1 World manufacturer identification code for road vehicles (WM1) (TSO3780: 1983, MOD) GB/T1841V-255: Vehicle identification code barcode label 3 Terms and definitions
The following are not defined in this standard, 3. 1
Vehicle Identification NumbervrbickidentirienlionnumberviIn order to identify a vehicle, a group of codes are assigned to the vehicle by the vehicle manufacturer. 3.2
World Manufacturer Identification Number (WMl)WurldManofaciurerdentinler (WMr)The first part of the vehicle identification number (VIN) is used to identify the manufacturer of the vehicle. When this code is set to indicate the manufacturer of the vehicle, it serves as the identification mark of the manufacturer. The world manufacturer identification code, when combined with the remaining part of the vehicle identification code, is sufficient to ensure that the vehicle identification code of all vehicles manufactured and inspected in the country within 3 years is accurate and consistent. 3.3
Vehicle Description PartvehicleDescriptionLiun (vDs)The second part of the vehicle identification number (VIN) is used to describe the characteristics of the vehicle. 3, 4
Vehicle indication part (YS) is the last part of the vehicle identification code (V1V). It is a set of codes that are determined to distinguish different drivers and police officers. This set of codes is the same as the VIS part. It is determined to ensure that the vehicle identification code of each vehicle produced by each vehicle manufacturer within 30 years is unique. 3. 5
Complete vehiclecnapletedvehic.le
Except for adding easily installed parts (such as tires and wheel assemblies) or performing minor expansion operations (such as repairs, it is not necessary to carry out manufacturing operations in accordance with GB16735-2004
to become a vehicle with basic functions: 3.6
Incomplete vehicleincompletewehicle
A vehicle that includes at least a chassis, power unit, transmission, overall system and braking system. This level of vehicle assembly does not require any manufacturing operations in accordance with GB16735-2004
except for adding easily installed parts (such as tires and wheel assemblies) or performing minor expansion operations (such as painting). A vehicle manufacturer is a vehicle manufacturer that assembles some parts to make an incomplete vehicle, none of which can be used alone to make an incomplete vehicle. A vehicle manufacturer that performs manufacturing operations on incomplete vehicles to make them complete vehicles, or a vehicle manufacturer that performs manufacturing operations on complete vehicles. 3. 10
Intermediate stage manufacturer intermediateanufartwrcs A vehicle manufacturer that performs reverse manufacturing operations on an incomplete vehicle. It is not a incomplete vehicle manufacturer. It does not mean that the final stage manufacturer
Year e
The calendar year of the vehicle manufacturing is determined by the axle manufacturing plant. 3.12
Model year modelyetr
Designated by the manufacturer for a single model, it is not necessary to consider the calendar year of the actual manufacturing of the vehicle. As long as the actual period does not exceed two years, it can be different from the calendar year. 3.13
Symbols that separate the various parts of the vehicle identification code (start and end) to demarcate the boundaries of the vehicle identification code (start and end). The two symbols cannot be mixed with the number or the number of the vehicle. 4 Content and composition of the vehicle identification code
4.1 The basic composition of the vehicle identification code is: the source identification code (MI), the vehicle description code (VDS), and the vehicle indication code (VIS), a total of 17 digits, for complete vehicles and/or incomplete vehicles with an annual output of ≤500 vehicles; the first part of the vehicle identification code is the manufacturer identification code (WMJ); the second part is the vehicle description code (VT); and the third part is the vehicle indication code (VIS) (as shown in Figure 1). For vehicle manufacturers with an annual output of ≤500 complete vehicles and/or incomplete vehicles, the first part of the vehicle identification code is the manufacturer identification code (WMJ); the second part is the vehicle description code (VT); and the third part is the vehicle indication code (VIS) (as shown in Figure 1). Manufacturer identification code (WM); the first part is the third, fourth and upper digits of the third part of the vehicle description part (VT) and the three digits of the first part 2
CB16735-2Q04
code together to form the manufacturer identification code (WM1), and the remaining five digits are the vehicle indication part (VIS) (as shown in Figure 2). K
OO0OOO
一·The following are the characters:
stands for table
口口网
--a generation of characters;
——stands for numbers
4.2 Manufacturer identification code ()
0 000000
Production…Sequence
Assembly plant
Each household
1 Characteristic code
Geographical area
D0U00OO0
Production number
Corresponding to the first, second characters
in VIN, may become WM
Railway factory
Control and control
Vehicle property code
Our country
region
World Manufacturing Plant Identification Code (WMI) is the new part of the vehicle identification number, WM1 meets the current provisions of GB16737-200M: 4.3 Vehicle identification part: VTS
4.3.1 The Vehicle Description Section (VLS) is the first part of the vehicle identification code, consisting of six digits (i.e. the fourth to fifth digits of the VTN). If the vehicle manufacturer does not use one or more of the digits, the letter or number selected by the vehicle manufacturer shall be used to fill in the digits. 4.3.2 The first to fifth digits of the VIS The first to eighth digits of the VIN describe the characteristics of the vehicle, and the code and order are determined by the vehicle manufacturer:
4.3.2.1 The VDS can be described in the following ways (the specific description method is shown in Appendix I3) Vehicle Type
Vehicle Structure Characteristics (such as: vehicle model, year of use, type of vehicle, cargo box type) 4.3.2.2 For the following vehicles, the vehicle model characteristics described in the VDS include the following: vehicle type, engine type, number of axles and layout, etc.): 3
GB167352004
Single vehicle equipment characteristics (such as; restraint system type, engine type, inverter type, chassis type, brake type, etc.): Vehicle technical characteristics (such as: vehicle maximum gross vehicle weight, vehicle length and wheelbase, number of seats, etc.). 4.3.2.2 For the following vehicles, the vehicle model characteristics described in the VDS include the characteristics specified in 1, Table 1
Ten-year vehicle
This vehicle includes vehicles and light vehicles
Yuanyi vehicles
Body, engine characteristics| |tt||Body type, vehicle weight, engine characteristics, vehicle length, engine characteristics
Original body, vehicle weight
Vehicle type, traction characteristics
Body type, vehicle weight, engine characteristics, including fuel type, displacement and/or power, b. Brief items for the manufacture or removal of incomplete vehicles for trucks.: For the manufacture or removal of incomplete vehicles for trucks, the engine characteristics include fuel type, engine type and displacement and the description of the vehicle.
4.3.3The first digit of VIS (i.e. the first digit of VIN) is the check digit. The check digit can be any letter "X" from 0 to 1, which is used to check the accuracy of the vehicle identification number record. The check digit should be calculated according to the provisions of Appendix A. 4.4 Vehicle identification code (S)
4.41 Vehicle identification code (VIS) The third digit of the VIS (the 10th to 17th digits of the VIN) shall indicate the year code as specified in Table 2 (cycled every 30 years).
4.4.3 The second digit of the VIS (the 10th digit of the VIN) shall indicate the assembly plant
4.4.4 If the vehicle manufacturer produces more than 35 complete vehicles and/or incomplete vehicles per year, the 12th to 17th digits of this digit (i.e., VIY) shall be used to indicate the production sequence. If the vehicle manufacturer produces more than 35 complete vehicles and/or incomplete vehicles per year, the 12th to 17th digits of this digit (i.e., VIY) shall be used to indicate the production sequence. If the annual production of non-finished vehicles is 500, the second, fourth and fifth digits of this part (the 14th to 15th digits of the VIN) are used together with the third digit of the first part to indicate the vehicle manufacturer. The sixth, seventh and eighth digits (the 157th digit of the VIN) are used to indicate the production serial number. 4.5 Code
The following digits can be used in the vehicle identification code: 4.6 Separation
12H5e7x!0
ARCDHHGHJKZMNPRSTUVWXYZ
(the 1st and 57th digits of the VIN cannot be used)
CB 167352004
The vehicle manufacturer shall handle the vehicle identification code by itself, but shall not use any code (see 4, 5) or any code that may be mixed with the vehicle identification code. For example: ★.5 The fixing method and marking position of the vehicle identification code 5.1 The fixing method of the vehicle identification code
In order to determine the VIN, the vehicle manufacturer can select from the following methods. 51,1 The vehicle identification code is directly printed on the upper left body 5.1.2 The vehicle identification code can also be printed on a plate, but this plate should be located on the internal vehicle structure specified in 5.1.1. 5.2 Position of vehicle identification code 5.2.1 All vehicles must have a unique temporary identification number, which should be marked at a designated position on the vehicle. 5.2.2 The vehicle identification code should be displayed in the first half of the vehicle name. 5.2.3 The vehicle identification code shall also be indicated on the vehicle body. Except for the following: 3. Full-wheeled vehicles and motorcycles: 5.2.4 The vehicle identification code of Class M and V vehicles shall also be indicated on the left dashboard near the windshield pillar. The vehicle identification code can be distinguished from the outside of the vehicle without moving any parts. 5.2.5 The vehicle identification code shall be indicated in at least one maintenance document. 5.3 Requirements for marking the vehicle identification code
5.3.1 Height of the vehicle identification code: If it is directly engraved on the vehicle structure, the height should not be less than 10mm; the height should not be less than 3mm; For vehicles with high speed and light load, the height should not be less than 5mm; the height should not be less than 4mm
5.3.2 The characters of the vehicle identification code should be clear, firm and durable and not easily replaced under any circumstances. 5.3.3 The vehicle identification number can be marked in the form of human-readable code or machine-readable barcode. If barcode is used, it must comply with the requirements of GB/11845-2001.
5.3.4 The vehicle identification code shall be marked on the vehicle or plate, and shall be displayed in one line: it is not necessary to use the separator. The identification code must be marked in two lines, and there should be no blank line between the two lines. The beginning and end of each line shall be separated by a separator. 5.3.5 The vehicle identification code shall be marked on the same line as the vehicle identification number. It is not allowed to use the separator. 6 Vehicle manufacturer's markings
E.1 Each vehicle manufacturer and/or vehicle manufacturer shall mark the vehicle identification code on each vehicle at the marking position and marking level specified in this standard, and the vehicle identification code shall be marked in the accompanying documents as indicated in the marking method. E.2 The intermediate and final sections shall be marked as required! When modifying the product, the original vehicle identification code of the vehicle shall be completely marked on the modification certificate and the vehicle identification code shall be marked on the production label. It shall not be changed, and the vehicle identification code and marking method shall be included in the vehicle documentation. 6.2.1 If the vehicle identification code of the original vehicle is not easily dispersed during the incomplete vehicle manufacturing operation, the manufacturer shall be responsible for the maintenance and inspection of the vehicle identification code.
6.2.2. In the process of manufacturing incomplete vehicles with complete cabs, the manufacturer shall produce modified vehicles in accordance with this standard. The vehicle identification code of the original vehicle shall be marked in the marking position and marking format specified in GB 15735-2004 for N-type vehicles. 7. Vehicle identification code compilation rules The vehicle manufacturer shall formulate its own vehicle identification code compilation rules in accordance with the provisions of this standard, and shall specify the abbreviation rules for each digit of the vehicle identification code, the marking position and marking format of the vehicle identification code, etc. 7.2 Vehicle manufacturer's new vehicle identification code compilation rules shall be submitted to the registration agency of the national automobile competent department for review and filing: 7.3 Vehicle manufacturer shall mark the vehicle identification code of each vehicle product in accordance with the approved and filed vehicle identification code compilation rules.
7.4 Imported vehicles produced by vehicle manufacturers within the territory of the People's Republic of China may be issued vehicle identification numbers in accordance with the local regulations of the place where the vehicles are imported.
Imported vehicle manufacturers may avoid complying with the provisions of 7.1, 3.2 and 7.3. Appendix A (Normative Method) Calculation method of check digit GB16735—2004 The sixth digit of the VIN code (i.e. the sixth digit of the VDS part is the check digit, and the check digit can be any number or letter in the VIN code). After the vehicle license plate manufacturer has determined the total ten-digit code of the VIN, the check digit should be calculated by the following method. The values of the numbers and letters in the vehicle identification code are shown in Table A.1 and Table A.2: Table A.1 The numbers in the VIN and the letters in the VIN are given a weight coefficient according to Table A.3. Table A.3 =) Multiply the two digits other than the check digit by the corresponding value of the letter. Divide the products by 1 and the remainder is the check digit. If the remainder is 1, the check digit is Y. Example
Returning to Table A, Example 4 illustrates how to determine the check digit. 4
The digits in VIN
|VN code
Total of monitoring value
Additional effect
Product
24+42+36—5+15—37266—9+-0+n+10+12+276/1250
After the above calculation, it is determined that the verification code of this VIN code is C, then the wide-band VIN code of this vehicle is, FWADRJF01ICC2346ET
GI 16735—2004
Appendix B
(Data Performance Record)
Model Feature Description
Vehicle manufacturing, "When describing the vehicle features, please refer to the relevant instructions in the record. B.1 Vehicle type
Vehicle type table is classified according to GB/T3730.1-233: and (1T419.1--1S5G, see Table B. Table B. 1
Parallel passenger car, mobile passenger car, high-grade passenger car, small monthly vehicle, collection vehicle, cold station vehicle, standard and extended vehicle
Fixed trailer and authorized trailer
Incomplete vehicle
B2 Vehicle structure characteristics
B, 2. 1 Body type
Knowledge Sichuan car Super group ride car, multi-way Sichuan car, special Sichuan and Sichuan car (the first military, bulletproof military. Teaching ambulance buy this chapter 1
Special project introduction year, notice truck, film delivery truck, supervisor release meeting, special operation rate special truck, etc. Small recording passenger car dismantling force passenger car, long diagnosis car Gasa passenger car, sleeper sales including car change according to the car. No pad tram, the more prosperous T, female enjoy the main guard
: two-wheeled single scan, two-wheeled light road version trailer, business surface positive three sales light change trailer, special Sichuan stop three light change! Deep trailer. Two-wheeled parts through deep this cow, two light road version rate trailer, two Yan highway more prosperous car, commercial wheel shear prosperous flavor trailer, two grab promise also tour road racing, two Highway vehicles, light-ton vehicles, two-wheeled vehicles, special two-wheeled trailers, three-wheeled vehicles, one-wheeled vehicles, one-wheeled vehicles, each vehicle has a seat, three-wheeled vehicles, four-wheeled vehicles, two-wheeled vehicles, etc., which can be described by body shape, driving type, cargo type, bearing or style, etc. The vehicle shape can be long, flat head, flat head, N doors, etc. The cab can be divided into flat driving cab, long head cab, flip cab, single-row seat cab, hanging seat cab, paved cab, etc. The load type can be divided into flat version and railing type. Xiang type, tank type, food type, self-propelled type, nesting type, vehicle type, special station structure classification, load-bearing mode can be divided into fire load-bearing type, semi-load-bearing type, non-load-bearing type, etc. R.2.2, drive type
can be divided into front drive, rear drive, full drive, etc., drive efficiency type can be divided into 1×?, 4×4.6*2.5X4.6X6, 8X1, etc.:
B.3 Vehicle installation characteristics wwW.bzxz.Net
B.3.1 Engine will be marked
for automobiles, the engine type can be divided into engine displacement 1.) or power (fuel type, supply test, engine displacement can be divided into For high-speed trucks and light-duty vehicles: engine type oxygen number, stroke number, engine displacement and layout, cooling type and other characteristics can be described:
D.3.2 Accident system type
The vehicle can be described with features such as front airbags, driver's side airbags, convenience airbags, and space airbags.
B.3.3 Transmission type
The transmission type, gear and other characteristics can be described: D.3.4 Suspension type
The chassis type can be classified according to the provisions of relevant standards. B.3.5 Power type
CB16735-2004
For cars, the brake type can be defined according to GT5/T5520-2H12 Road Vehicle and Car Brake Technical Specification? idt1S)611:1994) provisions for classification 6 transmission mode/turning mode
Transmission mode can be divided into chain transmission, transmission shaft transmission, electric transmission, hydraulic transmission, etc.; dynamic mode can be divided into manual reverse drive, motor start, etc.,
B, 4 car extraction technology to find characteristic substitution
car technology will include size parameters, mass image, etc.,4
VIN
VN code
total of the value
added
product
24+42+36—5+15—37266—9+-0+n+10+12+276/1250
After the above calculation, it is determined that the verification code of the VIN code is C, so the wide-band VIN code of the vehicle is, FWADRJF01ICC2346ET
GI 16735—2004
Appendix B
(Data Performance Record)
Model Characteristics Description
Vehicle manufacturing, "When describing vehicle characteristics, please refer to the relevant instructions in the record. B.1 Vehicle Type
Vehicle type table is classified according to GB/T3730.1-233: and (1T419.1--1S5G, see Table B. Table B. 1
Parking car, live car, high-grade car, small monthly car, collection car, cold station car, model and extended car
Fixed car and authorized rate car
Incomplete vehicle
B2 Vehicle structure characteristics
B, 2. 1 Body type
Zhiwenchuan car super passenger car, multi-chuan road to Sichuan car, special Sichuan and Sichuan car (the first military, bulletproof military. Teaching ambulance buy this chapter 1
special project introduction year, notice truck, film delivery truck, supervisor release meeting, special operation rate special truck, etc. small recording passenger car dismantling force passenger car, long diagnosis departure car Gasa passenger car, sleeper sales including car change according to the car. No pad tram, Yuewang, etc. T, female enjoy main guard
: two-wheeled single scan, two-wheeled light road version trailer, business surface three-pin light change trailer, special Sichuan stop Three light changes! Deep trailer. Two-wheeled parts through deep this cattle, two light road version of the rate trailer, two Yan highway over Wang car, commercial wheel cut Wang flavor trailer, two grab also tour road racing, two grab highway Shun car, need light tons of wild wear, two grab resistance type car, special two-wheeled rate trailer, lift adjustment effect three-wheeled original and car, one-wheeled change car, according to the evil up to a warehouse sweep car, each car on a grab seat upgrade, special manual three motorcycles, four can a field training chapter refers to the car, two wheels with dynamic single ten etc. test starting point (one bed blood!, no learning fast leave blood: two bottom), body shape, The vehicle can be described by the type of driver, cargo type, load bearing or style, etc. The vehicle appearance can be long, flat head, double-layer, and N-door, etc. The cab configuration can be divided into flat cab, long head cab, flip-up cab, single-row cab, hanging seat cab, paved cab, etc. The load type can be divided into flat plate type, flat plate type, cargo type, tank type, food type, self-supporting, nested type, vehicle type, special structure type, and the load-bearing mode can be divided into load-bearing type, semi-load-bearing type, non-load-bearing type, etc. R.2.2, Driver Drive type
can be divided into driving force type and driving type, driving point type can be divided into front drive, rear drive, all-wheel drive, etc., drive efficiency type can be divided into 1×1, 4×4.6*2.5X4.6X6, 8X1, etc.:
B.3 Vehicle installation characteristics
B.3.1 Engine will be tested
For automobiles, the engine type, engine displacement (1.0) or power (1.0), fuel injection type, fuel injection type, engine exhaust mode and distribution type can be tested. For high-speed trucks and light-duty vehicles: Describe the engine type, number of starts and strokes, engine displacement and layout, cooling type and other features:
D.3.2 Accident system type
The vehicle can be described as having front airbags, driver's side airbags, convenience airbags, spacer airbags and other features.
B.3.3 Transmission type
The transmission type, gear and other features can be described: D.3.4 Suspension type
The chassis type can be classified according to the provisions of relevant standards.
CB16735-2004
For cars, the brake type can be defined according to GT5/T5520-2H12 Road Vehicle and Car Brake Technical Specification? idt1S)611:1994) provisions for classification 6 transmission mode/turning mode
Transmission mode can be divided into chain transmission, transmission shaft transmission, electric transmission, hydraulic transmission, etc.; dynamic mode can be divided into manual reverse drive, motor start, etc.,
B, 4 car extraction technology to find characteristic substitution
car technology will include size parameters, mass image, etc.,4
VIN
VN code
total of the value
added
product
24+42+36—5+15—37266—9+-0+n+10+12+276/1250
After the above calculation, it is determined that the verification code of the VIN code is C, so the wide-band VIN code of the vehicle is, FWADRJF01ICC2346ET
GI 16735—2004
Appendix B
(Data Performance Record)
Model Characteristics Description
Vehicle manufacturing, "When describing vehicle characteristics, please refer to the relevant instructions in the record. B.1 Vehicle Type
Vehicle type table is classified according to GB/T3730.1-233: and (1T419.1--1S5G, see Table B. Table B. 1
Parking car, active car, high-end car, small monthly car, collection car, cold station car, model and extended car
Fixed car and authorized rate car
Incomplete vehicle
B2 Vehicle structure characteristics
B, 2. 1 Body type
Zhiwenchuan car super passenger car, multi-chuan road to Sichuan car, special Sichuan and Sichuan car (the first military, bulletproof military. Teaching ambulance buy this chapter 1
special project introduction year, notice truck, film delivery truck, supervisor release meeting, special operation rate special truck, etc. small recording passenger car dismantling force passenger car, long diagnosis departure car Gasa passenger car, sleeper sales including car change according to the car. No pad tram, Yuewang, etc. T, female enjoy main guard
: two-wheeled single scan, two-wheeled light road version trailer, business surface three-pin light change trailer, special Sichuan stop Three light changes! Deep trailer. Two-wheeled parts through deep this cattle, two light road version of the rate trailer, two Yan highway over Wang car, commercial wheel cut Wang flavor trailer, two grab also tour road racing, two grab highway Shun car, need light tons of wild wear, two grab resistance type car, special two-wheeled rate trailer, lift adjustment effect three-wheeled original and car, one-wheeled change car, according to the evil up to a warehouse sweep car, each car on a grab seat upgrade, special manual three motorcycles, four can a field training chapter refers to the car, two wheels with dynamic single ten etc. test starting point (one bed blood!, no learning fast leave blood: two bottom), body shape, The vehicle can be described by the type of driver, cargo type, load bearing or style, etc. The vehicle appearance can be long, flat head, double-layer, and N-door, etc. The cab configuration can be divided into flat cab, long head cab, flip-up cab, single-row cab, hanging seat cab, paved cab, etc. The load type can be divided into flat plate type, flat plate type, cargo type, tank type, food type, self-supporting, nested type, vehicle type, special structure type, and the load-bearing mode can be divided into load-bearing type, semi-load-bearing type, non-load-bearing type, etc. R.2.2, Driver Drive type
can be divided into driving force type and driving type, driving point type can be divided into front drive, rear drive, all-wheel drive, etc., drive efficiency type can be divided into 1×1, 4×4.6*2.5X4.6X6, 8X1, etc.:
B.3 Vehicle installation characteristics
B.3.1 Engine will be tested
For automobiles, the engine type, engine displacement (1.0) or power (1.0), fuel injection type, fuel injection type, engine exhaust mode and distribution type can be tested. For high-speed trucks and light-duty vehicles: Describe the engine type, number of starts and strokes, engine displacement and layout, cooling type and other features:
D.3.2 Accident system type
The vehicle can be described as having front airbags, driver's side airbags, convenience airbags, spacer airbags and other features.
B.3.3 Transmission type
The transmission type, gear and other features can be described: D.3.4 Suspension type
The chassis type can be classified according to the provisions of relevant standards.
CB16735-2004
For cars, the brake type can be defined according to GT5/T5520-2H12 Road Vehicle and Car Brake Technical Specification? idt1S)611:1994) provisions for classification 6 transmission mode/turning mode
Transmission mode can be divided into chain transmission, transmission shaft transmission, electric transmission, hydraulic transmission, etc.; dynamic mode can be divided into manual reverse drive, motor start, etc.,
B, 4 car extraction technology to find characteristic substitution
car technology will include size parameters, mass image, etc.,
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.