JB/T 7764-1995 Square bale baler types and basic parameters
Basic Information
Standard ID:
JB/T 7764-1995
Standard Name: Square bale baler types and basic parameters
Chinese Name:
方草捆压捆机 型式与基本参数
Standard category:Machinery Industry Standard (JB)
state:in force
Date of Release1995-06-16
Date of Implementation:1996-07-01
standard classification number
Standard Classification Number:Agriculture, Forestry>>Agricultural and Forestry Machinery and Equipment>>B92 Livestock and Poultry Machinery and Equipment
associated standards
Publication information
other information
Focal point unit:Hohhot Animal Husbandry Machinery Research Institute
Publishing department:Hohhot Animal Husbandry Machinery Research Institute
Introduction to standards:
This standard specifies the types and basic parameters of square hay balers. This standard applies to balers that collect hay and press it into square hay bales with ropes or wires as binding materials. JB/T 7764-1995 Types and basic parameters of square hay balers JB/T7764-1995 Standard download decompression password: www.bzxz.net
Some standard content:
Machinery Industry Standard of the People's Republic of China
JB/T7764-95
Square hay baler
Type and basic parameters
Published on June 16, 1995
Ministry of Machinery Industry of the People's Republic of China
Implemented on July 1, 1996
Machinery Industry Standard of the People's Republic of China
Square hay baler
Type and basic parameters
Subject content and scope of application
This standard specifies the type and basic parameters of square hay balers. This standard applies to balers that pick up hay and press it into square hay bales with ropes or wires as binding materials. Reference Standards
NJ416 Animal Husbandry Machinery
According to the operation mode:
Fixed baler:bZxz.net
Traction baler;
Self-propelled baler;
Product numbering rules
Baler driven by its own engine.
3.2According to the material used to tie the bales:
Rope baler;
Wire baler.
Basic Parameters
Main Parameters
The width of the picker is the main parameter.
4.2Each basic parameter shall comply with the provisions of Table 1. Table 1
Working width
Compression chamber cutting dimensions
Piston reciprocating times
Times/min
Matching power
Approved by the Ministry of Machinery Industry on 1995-06-16
360×460
JB/T7764-95
360×460
Implemented on 1996-07-01
Model of 5-square bale press
JB/T7764-95
The representation method of product model shall comply with the provisions of NJ416. Additional remarks:
This standard is under the jurisdiction of the Hohhot Animal Husbandry Machinery Research Institute of the Ministry of Machinery Industry. This standard was drafted by the Hohhot Animal Husbandry Machinery Research Institute of the Ministry of Machinery Industry. The main drafters of this standard are Wang Jianping and Wang Zhenchen.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.