JB/T 10120-1999 Machine tool fixture parts and component clamps
Basic Information
Standard ID:
JB/T 10120-1999
Standard Name: Machine tool fixture parts and component clamps
Chinese Name:
机床夹具零件及部件 夹板
Standard category:Machinery Industry Standard (JB)
state:in force
Date of Release1999-08-06
Date of Implementation:2000-01-01
standard classification number
Standard ICS number:General, Terminology, Standardization, Documentation>>Vocabulary>>01.040.29 Electrical Engineering (Vocabulary)
Standard Classification Number:Machinery>>Process Equipment>>J44 General Fixture
Publication information
other information
Focal point unit:Mechanical Science Research Institute
Publishing department:Mechanical Science Research Institute
Introduction to standards:
JB/T 10120-1999 This standard specifies clamps for workpieces with a diameter of 20 to 150 mm. This standard was first published in 1983 as JB 3394-83 and revised for the second time in 1991 as GB/T 12885-91. JB/T 10120-1999 Clamps for machine tool fixture parts and components JB/T10120-1999 Standard download decompression password: www.bzxz.net
Some standard content:
IC5 28.060.41
Machinery Industry Standard of the People's Republic of China
The parts and units of jigs and fixtures1999-08-06Promulgated
State Machinery Industry Bureau
2000-01-01Implementation
■Scope
Machinery Industry Standard of the People's Republic of China
The parts and units of jigs and fixturesClampplate
This standard specifies the parts applicable to the jigs with a diameter of 20~150mm. 2 Dimensions
The dimensions are shown in the following table.
Small quantity upper piece straight
Nominal diameter
Applicable piece diameterbZxz.net
30-150
Approved by the State Machinery Industry Bureau on August 6, 1999310
JB/T10120-1999
Implementation on January 1, 20100
3 sister notes
3.1 Marking example:
Nominal diameter of 20~100mm plate
1121-—1999
JB.T10120—1999
20~100
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.