This standard specifies the symbols for operator controls and other display devices on lawn and garden power machinery. GB/T 4269.3-2000 Symbols for operator controls and other display devices on agricultural and forestry tractors and machinery, lawn and garden power machinery Part 3: Symbols for lawn and garden power machinery GB/T4269.3-2000 Standard download decompression password: www.bzxz.net

rcs 65. 060. 10
National Standard of the People's Republic of China
GB/T 4269. 3 2000
idt YSO 3767-3:1995
Tractors, machinery for agriculture and forestry, powered lawn and garden equipment-Symbols for operator controls and other displays-Part 3:Symbols for powered lawn and garden equipment2000-06-05 Issued
2000-11-01 Implementation
Issued by the State Quality and Technical Supervision Commission
GB/T4269.32000
This standard adopts the national standard TS367-3:1 Symbols for operators’ decision making mechanisms and other uses of tractors and machinery for agriculture and forestry and industrial power machinery Part 3: Symbols for use in agricultural and medical power machinery, and is formulated on the basis of the original B667G1993.
Compared with the original JH/6675-103, this standard has the following changes: 1. The indentation of the contents has been greatly adjusted: 2. New symbols have been added to the standard, and the symbols that have been revised have been adjusted: The revised standard has a total of 22 symbols: 20 new symbols have been added
Two previous symbols have been adjusted in the standard
This standard lists part of the standard for symbols used in agricultural and forestry machinery, lawn and gardening power machinery, operators' mechanisms and other indicating devices. This standard includes: Part 1: Applicable equipment numbers; Part 2: Agricultural machinery and equipment symbols; Part 3: Symbols for agricultural machinery and horticultural machinery. The requirements of this standard are artificial standards. This standard is proposed by the National Machinery Industry Association and is under the jurisdiction of the National Agricultural Machinery Standardization Technical Committee. The standard units are: China Agricultural Machinery Research Institute, Luoyang Tractor Research Institute. The original authors of this standard are: Liu Yanbin, Zhang Cheng, Shang Jue, GBT 2269.32003. Preface
International Standards are a joint organization of national bodies (members of which are bodies that use international standards) that establish and regulate the values ​​of international standards. They are the result of the participation of national and international bodies in the development of technical standards. The members of the technical committees of the committees are: International Standards are a joint organization of national and international bodies that establish and regulate the values ​​of international standards. They are the result of the participation of national and international bodies in the development of technical standards. The international standards are formulated by the technical committees of the international standardization bodies and are carried out in accordance with the requirements of the international standards. The second edition of the standard is published in 1944. 5) 176:15 1st edition Installation end 19) 3767 In the general standard to the new agricultural and forestry tractors, lawn and garden power machinery operating mechanism and other display devices of the light 3 points of the following parts:
Part 2: Symbols for tractors and machinery; Part 3: Symbols for power machinery and equipment; Part 4: Symbols for portable forestry machinery; Part 5: Symbols for portable forestry machinery; Appendix A: Light standard recording,
1 National Standard of the People's Republic of China
Tractors and machinery for agriculture and forestry, lawn and garden power machinery - Symbols for operator control mechanisms and other display devices - Part 3: Symbols for lawn and garden power machinery Tractorsimachinrry For agriculture and foresiry poyered lawn and garden equipment—Symbodies foroperator tools and equipment—Part 3:Symbodies for garden tools and equipment—I.G.I./T 4269.3-2000
idl IS 3767-3:1995
This standard specifies the operating mechanisms and common methods of horticultural power machinery and equipment. Product numbers and reference numbers 2 Reference standards
The following are the specifications of this standard: The following are the specifications of this standard: The following are the specifications of this standard: The following are the specifications of this standard: The following are the specifications of this standard: The following are the specifications of this standard: The following are the specifications of this standard: The following are the specifications of this standard: The following are the specifications of this standard: The following are the specifications of this standard: The following are the specifications of this standard: Interoperable symbols with other standard display tables No. 1: General symbols (1S03767-1: 9913G/.-1S9 gas equipment graphic symbols (idIEC417: 1SS4G15273.11596 etc. (107325: 19895: 16273.2-1996 said the signature graphic number machine tool general symbol (ne15000, 1k) B16275.3-15 section spare graphic number welding equipment general month meal number IS70: sGD/T 119n2.1—1997
Drawing number indicates the purchase and installation of the drawing number standard 1: the formation of the shape of the poor number (ccyiS1a4n:1.H96)
3 Specification
Standard adopts the text in Part 1/4269.1
4 General requirements
4.1 The provisions of the corresponding provisions of the vehicle shall be followed as much as possible. Except for the special symbols indicated, the symbols and space symbols of the old wheel drawings of this standard shall be used. The visual effect of the year's visual effect is allowed to be reproduced. 4.2 Limitations: Some development and display skills may require additional line thickness or other minor changes to the symbols. As long as the basic elements remain unchanged, similar modifications are allowed. 3. To improve the appearance of the repair symbol, the group can recognize the production, or the old equipment structure used by the worker, the number of questions, the quantity of the line, the white negative angle of the line, or the number of the line. Usually, you only need to keep the case of the general number of evidence, and the dramatic shape of the card can be treated at will. The national quality and technical supervision 2000-06-05 batch 2000-11-01 implementation
GB/4269.3-7000
No. ... 4.4 In actual use, all symbols should be large enough for the operator to recognize them easily. The appropriate size can be found in the specification B/18912.1. Except for some special symbols, the size and use should be determined according to the production standard. 4.5 Most symbols are combined with other symbols, that is, various symbols and methods will be combined in the new symbols.
4.6 If the symbol is a machine or a machine part, it is considered fashionable. It is necessary to paste the machine symbol in the standard way. From the stone to the left: if the symbol in the machine domain machine city department is mentioned as Xie said doctor, then the climbing number in the machine treatment unique direction can be "upward: 4. The soft infant machine control and display on the special number and its Kenjingke quality contrast, most people like the soft machine symbol layer algae back book my color teaching number. The display device symbol guide can use a dark background quality relief color symbol, or a light background prohibition dark symbol guide, can reveal a kind of good visual effect. If it is a science image that can be transformed (for example, the attribute variable door 4.8 The symbol should be in the correct position to indicate the mechanism or display or be located on the symbol. A control mechanism needs a symbol on the table, and the position of the symbol should be consistent with the control mechanism, so that the direction of movement of the control mechanism and the force at the end of the symbol are consistent. 2.9 The symbols used should comply with the provisions of 3.122. The original code of the symbol should match 116. 4.10 The standard of the symbol should be consistent with 116. The symbols of 2S/1 are given in the special register. For register numbers below 5000, see G/T11272.1~6273.3. For register numbers above 5000, see GB/TG465.2.
4.11 The symbols in this standard are the original IS0 selection number for the square cabinet of 24m (32% of the original size). The corner mark is the right corner of the box with a length of 7. The corner mark is not a component of the symbol, but is used to ensure that all symbols are represented in a graphical form.
5 acid color
The following chlorine color is used to show the refreshing change on the bone, which means the following: one red: the number of lost cases is revised and reduced: the document needs to be revised and reduced, and the evil loan or the world amber position is required: the normal working range is outside: a normal working state.
E Mowing Equipment Symbols
Above Number
Symbol Form/Shape
Symbol Content/Application
Basic Symbol of Cutting Components
Control Components·High Section
1S/IE Registration Number
1Symbol Number
Symbol Shape/Shape
GB/T 4269.32000
Symbol Content/Application
Cutting Components - Engagement
Good Component Separation
Mounting Element - Reverse Drive Mechanism Engagementbzxz.net
Reverse Drive Mechanism - Separation
Roller - Adjustment during Cutting
Mounting Element·Basic Symbol
(Transmission Auxiliary (Text) Time Chemical Generation
IS0/FC Note number
Bell number
Screen number form/shape
GB/T4269.320Q0
Symbol meaning/use
Cutting device-open
((branch) allowed at any time·
Cutting device-lowering
(When assisting (branch) lemon allowed at any side
【Enough to assist (branch) kidney not allowed at any time
Cutting device stomach Ze moving
(Assisting (method #) stopping allowed at any side
Sweep and load - input - base six symbols
《Auxiliary support report allows in any
plan to transport
(shop (support) kidney allows in the time
15O/EC registration number
village number library
tillage machine symbols
symbol sequence
special symbols for writing machines
symbol sequence number
special shape comparison/shape makeup
symbol sequence/shape makeup
symbol and form/shape makeup
GBT 4769.3—2000
Character special management and use
cut kidney-down from the transport position
"Auxiliary (support) replacement is allowed in any ·
. Symbols contain text/application
spindle learning base public symbol
throwing machine-wheel base line number
ground horse machine collector spiral base car special number
micro-when number and increase-high thanks-to
1SOFC certificate number
ISTEL registration number
50/registration number||t t||Fu Lijing number
Fu Danyan style/shape
GH/T4269.3—20
Symbol meaning/section
Snow thrower-snow guide-degree adjustment-can
Snow tractor snow guide grid turns left
Snow blower-snow guide tower-centripetal spiral
ISO/EC note number
41 Scope
B/r4269.3—200
Attachment A
(Annex to the standard)
GB/T 4269 General special symbols for other parts
The symbols specified in this appendix are extracted from GB/T 4265 and are used for power equipment or mechanical equipment: those not given in this appendix may also be used as special symbols if applicable. A2 General symbols
Symbol number
Symbol form/shape
Symbol meaning/application
Power auxiliary output shaft (PIU)
Emergency stop
[Note: When the symbol is used in combination, the border
is red, the outer ring is red, and the outer ring is white]
ISO/IEC registration number
From GB/T 4763.J
Extracted from 150 3767-
Application example
Extracted from GB/T4259,
Flow engraving
Extracted from GB/T4259.1
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.