This standard specifies the nomenclature of the main parts of auxiliary devices for diesel locomotives. This standard applies to auxiliary devices for diesel locomotives. GB/T 3367.3-2000 Railway locomotive terminology Diesel locomotive auxiliary device parts nomenclature GB/T3367.3-2000 Standard download decompression password: www.bzxz.net

1c5,01.040.45
National Standard of the People's Republic of China
GB/T 3367. 3—2000
Glossary of terns for railway locomotiveNames of component parts for diesellacomotiveauxiliarydevice
Promulgated on 2000-10-25
Implementation on 2001-08-01
Promulgated by the State Administration of Quality and Technical Supervision
GB/T 3367.3-2000
This standard is a part of the cumulative standards of "Technical Requirements for High-speed Locomotives". This series of standard tours include: GB/T 3367.1-2000
GR/T 336T. 2--2000
GBT3367.3200
GH5/1 3367. 4--2000
GB/T 3367. 5 -200m
GH/T 3317. 6- 2000
GB/T 3367.7 -2000
G/T 3357.8—20002
CB/T 3367.9-1984
Technical certification for railway locomotives
Multiple-terminal terms for railway locomotives
Terminology for railway locomotive names
Terminology for railway locomotive transfer
Terminology for railway locomotive names
Terminology for locomotive names
Terminology for locomotives
Terminology for locomotives
Terminology for locomotive names
G/T 33.10-1934
Names of diesel locomotive parts
Terms of diesel locomotive auxiliary equipment parts
Names of diesel locomotive body and transmission parts
Names of air brake equipment parts
Diesel locomotive six types
Electric machinery
Hydraulic transmission
Electrical equipment
Terms of various locomotive equipment
Names of civil equipment
This standard is compiled for implementation. From the date of entry into force, this standard shall be replaced by GB/T37.-1. This standard is under the jurisdiction of the Dalian Diesel Locomotive Research Institute of the Ministry of Railways of the People's Republic of China. This standard will be revised by the Dalian Diesel Locomotive Research Institute of the Ministry of Railways of the People's Republic of China. This standard is revised by the Dalian Diesel Locomotive Research Institute of the Ministry of Railways of the People's Republic of China. This standard mainly includes the following revisions: Xi Weiqian
1 Scope
National Standard of the People's Republic of China
Terms for railway locomotives
Glossary or terms for railway locomotives Names or component parts for diesel locomotive auxdliary devices
This standard specifies the names of components for diesel locomotive auxiliary devices. This standard is applicable to auxiliary devices of diesel locomotives. 2 Cooling water pump
Water system of cooling water system.
2.1 Water pump body waler pump body
2.2 Water pump cover
Water pump cover
2.3 Water pump shaft
Waker pump shaft
2.4 Volute hteeasing
The weak shell of the water pump.
2.5 Impeller impeller
It is installed on the water pump. It has a rotor with curved blades. 2.6 Water pump gear nterpnnipgear
It is a step wheel at the end of the water pump to drive the water pump to rotate. 2.7
capnut
restriny
The non-moving part of the water pump, and the relatively moving dynamic ring structure, 2.9 moving ring
is used for the rotating part of the water pump, and the friction connection with the rotating static ring. 3 Expansion tank. Expansion tank. GB/T3367.3—2000
(3357158
Installed at the highest point of the water system, it is used to add water to the cooling water pipe and exhaust gas. It also provides space for hot and cold water.
3.1 Tank huty
3.2 Overflow pipe
Water fittings at the top of the water tank.
3.3 Water waler inlet
It is used to add water to the water inlet.
National Quality Supervision Bureau 2000 10-25 approved 2001-08-01 implementation
3.4 ​​glass water level gauge glassgalige
4. Radiator
radiator
sensitive heat treatment components:
GB/T3367.3—2000
4.1 tubular and corrugate radiator type radiator composed of two plates, inner fins and outer fins 2.3 tube fin radiator glledtuheradiater radiator dmihlefuidpassageradiatnr 4.4
in a group of high and low temperature radiators, low silver radiator layout On the windward side, the air passing through the radiator can be fully utilized, thereby improving the heat dissipation efficiency of the heat energy: the junction box is installed at the radiator end, connected to the flow tube plate, and the half box structure is sensitive to the water flow. 4.6 Tube plate tuheplate ... lube
It is a heat sink between two plates.
4.9 Heat sink adaugfin
It is a thin metal sheet with high heat dissipation capacity on the heat sink (or branch pipe). 4.10 Heat sink radiantringrrugatedrihhan It is a metal screen tape installed on the heat sink (or branch pipe) to improve the heat dissipation capacity. 4.11 Side protecting plate sideprotectingplate1. 12
Fin
It is a micro-step with shaped ribs.
4.3 Separatorplate
Endplue
5 Cooling fan coolingtan
It is used to cool the components of the heat sink by rotating the plate to maintain air flow. 5.1 Wheel wing
Wheel mh
5. 2 Hub
Wheel centre
Guide guard
5.2 Balancing weight
Balturee elgh
5.5 Blade
Bending shape installed on the wheel
5 Fan
Blower
Cooling rate motor or other sound parts.6.1 Blowing urning
6.2 Air inlet
6.3 Blastersear
6.4 Fan shaft
Blower shuft
6.5 Impeller
GB/T 3367.3- ·-2000
Installation process includes shaft, blade, warp, rear report, wheel light and balance loss generation expansion travel parts: 6.6 blade blude
Installation" The fan blades between the front and rear of the wheel change the direction of the airflow when rotating, the flow rate, pressure well and the air volume, 6.7
Impeller front plate impellerrrontplete
A disc connected to the blades.
8Impeller rear plate impellerrearplate
A circular segment connected to the hub and blades.
6. 9 Wheel hul
Inner connecting piece between the shaft and the impeller.
6.10 Balance weight
6.11 Bearing box bearingbux
7 Preheating boiler preheating bailer
Diesel power. Before starting. Used to heat the coolant water in the steel furnace: not suitable for over-circulation, the water, fuel oil and engine oil to be cooled reach a certain degree, 7.1 Boiler body boiler audy
7.2 Spiral cooling tube
Sphral cooling tube
Installed in the furnace body of the combustion spiral water pipe
7.3 Upper water tank
7.4 Lower water tank
7.5 Upper plate
7.6 Lower tube plate
Combustion chamber
upper water tank
lower woler 1ank
upper tube plate
lower tube plate
conabustien chamber
located in the middle of the upper water tank, airtight and airtight chamber, wind turbine and other longitude. 7.8 vortex swirler
combustion body under the full uniform medical simple: the inner blades but blow into the magnetic narrow wind-resistant axillary exhaust flow. 7.9 injection ignition device injeeliunaadignilionunlt7.10 injection need spruy noz2le
7.11 deep oil il strziner
f-12 ignition electrode Ignltioneleetnnde7.13 fan motor unit hewernoursy
left centrifugal wind meter and DC seven units skin unit. Throttle device throulemlt
Tao City wind suitable for small installation:
Fuel pump motor assembly fulpumpundmorassemhly7.15
Shengka wheel oil pump and direct construction also unit blowing change · Inter combustion chamber supply basket impulse unit. 7.16 Water pump motor assembly walerpumpandmotorassembly Japanese centrifugal water system and when the current composed of the machine distance. Make the cooling water of the machine water system flow through the quality heat steel protection cycle. Japanese fuel delivery pump fuelfeedpump
Gear pump that delivers fuel to the fuel control.
日.1 Pump body
8.2 Pump disc
8. 3 Driving gear shaftB.4 Driven gear shaft
8. 5 Shaft sleeve
8-6 Oil seal cover
9 Fuel prefilter
GB/T 3367.3 2000
Filter impurities in the fuel, and the filtering end is low. Close the fuel filter. 9. 1 prefilter cover
9.2 prefilter body
9.3 outside strainer
9. 4 inside strainer
prefilter body
outside strainer
inaide strainer
9. 5 caver of filter core
9. 6 bottom cover or filter core
hollow rod
cnicalspring
9.8 chain spring
9.9 changeover valve
used for opening and closing when cleaning one of the filters. \nFuel refiner fuelprecisionfilter The oil refiner that removes impurities and high viscosity from fuel 10.1 refiner filter body 10.2 filter core
It is composed of filter material and other basic components.
Oil filter core spindle
10.4 spindle rad
10.5 bypass valve
10.6 triple valve
10.7 bypass valve
10.B vent plug
11 oil pump
luhricating oil pump
When the diesel engine is working, it continuously delivers lubricating oil to the engine surface and gearbox. 11.1
pupbody
pupcover
bearing inner seat platebearing outer seat platebearing shaftdriving shaft
driven shuft
driving gear
driving synchronizing gear
GB/T 3367.3—2000
11:1synchronizing gear11.11driving gear
11.12gear bushing
11.13pressure limitiny val limit the valve of the outlet force of the standard system,
12 starter oil pump ...
13Auxiliary lubricating wilpumpThe gear pump sends the diesel oil through the engine housing to the oil heat exchanger. 14Oil filter lubricating ollrilterThe impurities in the oil are removed by this process. 14.1 Filter upper body14. 2 Filter lower body14.3 Filter body cover14.4 Filter core07
Impurities in the filter element:
14. 5 Bypass valve lhy-pnss valve
15Centrifugal oil filterRentrifugal oil filterA centrifugal oil filter uses the centrifugal energy in the oil to purify the oil. 15. 1 Filter 15.2 filter cover filtercover 15.3 rotor rntor
high speed can generate centrifugal force to separate impurities in the engine oil. 15. 4 rotor body rotnr hhek
15. 5 rotor caver
5. 6 hand shaft
utarsbu
15.7 hollow shaft hollo+haft
the oil is drawn from the lower end of the rotor into the rotor through the hole above the shaft, 15.8 oil inlet pipe oll inlet pipc
the pipe of the engine oil cleaner, with a 15.9 oil curtain bend at the bottom of the engine body
nfl collec.tingpipe
GBT 3367.3—2000
the clean oil separated in the reverse rotor enters the nozzle of the tear stem, and is cast on the abandoned rotor. 15. 10 Nozzle 102le
16 Turbocharger oil fine filter ollprecislonfiiterofturbocharer The oil entering the turbocharger is filtered again and filtered by the precision light oil filter: 16.1 Auxiliary filter bodyprecisionfiterbody16-2 Fine filter poly cap pneislon filter uver16.3 Filter element lltercore
164 Centrifuge centread
17 Oil heat exchanger luhricatingnitheatrxchanger uses cold water to cool the hot oil. 17.1 Body
17.2 Cover
17.3 Copper pipe
17.4 Fixed plate
17.5 Movable plate17.6 Latfleplate
17.7 Pressure ring
18 Sleel sheet niesh type air filter Sleel sheet niesh type air filter Used for oil absorption in extreme cases. 18. 1 Air filter paskage
18.2 connecting hose coinecting hose
18.3 frame chaals
18.4 filter filter
A filter element composed of two filter screens with a filter screen in the middle. 18.5 steel sheet mesh
A filter element composed of two filter screens with a filter screen in the middle. 18.6 spring break
19 air filter that allows the air to be circulated in the air purifier to separate the impurities: 19. Front body
is a three-dimensional filter with wind blades on the inside of the purlin to make the air passing through the purlin circulate along the wind guide to separate the impurities, 19.2 rear body
is a small filter that can pass through the front body and can be discharged from the rear cyclone, 20 starting gearbox starting tranymissiun genr bo1 is a starting engine, driving the fan, starting motor, stator and control generator are equipped with a standard variable gearbox. 20-1 upper box body
20.2 lower box body
203 oil dipstick
olldiostickWww.bzxZ.net
20.4 driving shaft
20.5 intermediate shaft
20.6 intermediate shaft
GB/T3367.32000
20. 7 exciter transmission shaft khaft20.8 exciter transmission gearercitertransmissionar2.9 starter generator transmission shaftstartingrnralortransmisyionsuft20.10 starter generator transmission gearstartioeeeneraturtralisimlssiongearflange
20.12 pulley
21 hydraulic transformerboxhydrostaticiransmiskinngearbaxan air box placed to drive the fan after the static pump ring. 21.1 upper box upperboshody
lower hoop lowerbaxhady
rentilator
21.3 breather
21.4 inspection hole coveriuspectinnraver
oil dipstickoildipsilck
driving shaftdrivinyshaPt
number between the left and right negative shafts, small diesel real crankshaft drive. 21.7 driving gear
21.9 driven gear
21.1 rear fan transmission shaft transmissionslinfiorrear transmissionmotor shaft21.11 rear fan transmission geartransmission gearofrear tractor motorblower21.12 bearings cower
22 transmission shaft transmisslonshaft
auxiliary device used to transmit power 23 nylon rope coupling nylonstringroupling consists of two half couplings, nylon runners, etc., and is composed of two type 1 instant bolts and a dragon rope. The internal transmission components are swept as ten elastic transmission cats
24 eardansbaft
25 hydrostatic transmission actuating shaft trarumtssiunshuftfkydrustutierunsmissiunguarlyax diesel engine crankshaft is a special shaft designed with a belt and a net wave pressure speed change range 25.1 hollow shaft hlluwslutt
The hollow shaft installed between the universal joint thread head and the spline shaft is divided into two sections, connected by a natural flange in the middle 25.2 spline shaft spline ghaft
one end is hollow and connected to the hollow shaft: the other end is a chain, 25.3 Universal joint fork: B/T3367.3—2000
one end is installed in the center of the case and connected to the universal joint. 25.4 Universal joint joinl
On the head, an axle, electric and bearing are considered. Its comparison can make three, and there is a certain degree of tension between the driven standard. 25-5 Hollow shaft flange ulkuwshaflnge
Two hollow shafts are used for connection. The two flanges are welded at the two hollow ends. 25.6 Torked flange torkedflange
The head part is connected with the half shaft of the joint. The flange has eight holes for mounting rubber and pins. 75.7 Spline flange uplinehouslineTlanige and the inner hole of the head method note have spline lithium The flange behind. 26 coupling c011p
auxiliary device in the transmission and the connection device. 26.1 elastic coupling ruhherelasticcoupling out of the connection plate, double center flange, connection degree change, screw selection and sleeve and other trees into a type of elastic coupling 26.2 elastic cylindrical coupling elasticparulelpinscnupling rubber trapped, support pin and core use some of the group reduction, the suction is better. Need a elastic coupling benefit of a blow, 26.3 steel sheet coupling steelshee1cnuplin parts by steel sheet and Darlan. Semi-rigid family shaft: 27 static hydraulic pump hydrnstaticpump
installed on the screen pressure speed change pin, three months card in the rotating blade to convert the work continent into high! Oil, static fluid is injected into the fan, 27.1 front pump body
27.2 rear pump body
27.3 spindle drive shuti
Installation of the pump body with a small chain and static pressure transformer, the inner chain of the spindle is connected to the inner end of the spindle, and the inner end is connected to the head of the main shaft:
27.4 spindle
27.5 cylinder body
27.6 distribution disk
distrihuting disk
27. / clamping plate
27.6 Piston
piston
rnnnectfug rnd
hydraulic motor hydrstis
equipped with a cold-pressed structure, converting the high positive impulse potential energy of the hydrostatic wax into expansion energy to drive the downward wind to rotate. The basic structure of the pressure wave is as follows: 29. Safety valve body The commercial oil of the hydrostatic system does not exceed the specified pressure: 29.1 Valve body 29.2 Lubricating valve 29.3 Conical valve 29.4 Conical valve body 29.5 Pilot valve 29.6 Pilot valve body 29.7 Lower valve hady
29.8 Shock absorber body
29.9 Shock absorber valve
29.tD Dumpers spring 29.11 Adjusting screw adjusting screw
Damper plug
GB/T3367.3—2000
30 Temperature control temperature catrolvalve and transmission system, according to the temperature change of cooling machine, the oil supply length of the dynamic pressure motor can be adjusted to adjust the speed and reach the automatic oil temperature or water virtual device
39.1 Constant temperature element thermotalieelement, such as diaphragm, push rod, etc., can change the position according to the change of oil and water temperature, so as to adjust the injection standard:
vulre body
30-2 body
30.3 slide valve
slidevalve
30-4 valve cover
YAIECUYUr
30.5 spring
spring
shutter cylinder
oil cyliuder nf shutter
has real control on the well, closed,
rylinder bade
3°.1 cylinder body
31. 2 piston
31.3 sleeve
spindle seere
31. 4 ball head nut
bahendant
31.5 steel ball
Ateel hall
32 oil tank for hydrcstatic system oil for hydrcstatic system,
32. 1 oil tank body
32.2 oil gauge
32.3 phosphorus filter32.4 upper nozzle32.5 lower nozzle
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.