GB/T 5626.2-1985 Flared tapered thread straight pipe fitting body
Basic Information
Standard ID:
GB/T 5626.2-1985
Standard Name: Flared tapered thread straight pipe fitting body
Chinese Name:
扩口式锥螺纹直通管接头体
Standard category:National Standard (GB)
state:Abolished
Date of Release1985-01-01
Date of Implementation:1986-09-01
Date of Expiration:2008-11-01
standard classification number
Standard ICS number:Fluid systems and general parts>>Pipeline components and pipelines>>23.040.60 Flanges, pipe joints and connecting parts
Standard Classification Number:Machinery>>General Parts>>J15 Pipe Accessories
Publication information
publishing house:China Standards Press
Publication date:1986-09-01
other information
Release date:1985-11-25
Review date:2004-10-14
Drafting unit:Standardization Institute of the Ministry of Machinery Industry
Focal point unit:National Technical Committee for Standardization of Pipe Accessories
Publishing department:China Machinery Industry Federation
competent authority:China Machinery Industry Federation
Introduction to standards:
GB/T 5626.2-1985 Flared tapered thread straight pipe fitting body GB/T5626.2-1985 standard download decompression password: www.bzxz.net
Some standard content:
National Standard of the People's Republic of China
Flared type tube fittings-
Male connector- Body
This standard applies to taper type tube fittings for pipeline systems with oil and gas as the medium. Marking example:
Type A flared chain-burst pipe fitting with an outer diameter D of 10 mm: Fitting body A10GB5626.2—85
National Bureau of Standards 1985-11-25 Issued
UDC 621.643.4
GB 5626.2—85
1986-0901 Implementation
Outer diameter
M12×1.510
M11×1.511.7
MiG ×1.5
GB5626.2—85
12.51.528.5
M18 × 1.515.7|11
M22 ×1.519.7|13
M24 × 1.521.7/15
M27 x1.5|2:.716.520.5
M30×2
/M33×2
M36×2
M39×2
M12 ×2
M45×2
ZM 33
7.510.515
Technical conditions are in accordance with GB5653-85 "Technical conditions for flared pipe joints". Additional notes:
53,1
This standard was proposed by the Ministry of Machinery Industry of the People's Republic of China and approved by the Standardization Research Institute of the Ministry of Machinery Industry. 74-1.5
Mass (steel>
kg/100 pieces*www.bzxz.net
This standard was drafted by the Ministry of Machinery Industry, Shanghai Pressurized Accessories, Shanghai Automobile Research Institute, and Shanghai Hydraulic Excitation Research Institute. The main drafters of this standard are Hu Bi Niu, Li Ningyu, and Zhang Qianlong.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.