This standard applies to stainless acid-resistant steel spun or cold-rolled (drawn) ultra-thin-wall seamless steel pipes. GB 3089-1982 Stainless acid-resistant steel plate thin-wall seamless steel pipe GB3089-1982 Standard download decompression password: www.bzxz.net
Some standard content:
National Standard of the People's Republic of China GB3089-1982 Stainless acid-resistant steel ultra-thin wall seamless steel pipe 1982-05-10Approved General Administration of Standards 1983-03-01 Page 1 sinoaec.com "Galvanized welded steel pipe for low-pressure fluid transportation" Material Code 3091-1993 1 Dimensions, shape and weight 2 Technical requirements 3 Test methods 4 Inspection rules 5 Packaging,||t t||Mark and quality certificate Page 2 sinoaec.com 《Galvanized welded steel pipe for low-pressure fluid transportation》 This standard applies to stainless acid-resistant steel spinning or cold-rolled (drawing) ultra-thin wall seamless steel pipe area w.sinoaec. 《Steel pipe for low-pressure fluid transportation》 3091-19 Page 3 1.1 Diameter and wall thickness 1 Size, shape and weight The outer diameter and wall thickness of the steel pipe shall comply with the provisions of Table 1. According to the requirements of the purchaser, by agreement between the two parties, steel pipes of other sizes other than those specified in Table 1 can be supplied. Table 1 10.3×0.15 24.4X0.20 40.6×0.30 53.2×0.60 61.0×0.35 70.2X0 .60 83.0X0.50 90.7X0.30 110.9×0.45 1.2 Inner diameter allowable deviation 12.4×0.20 26.4X 0.20 41.0×0.50 55.0×0.50 61.0×0.50 74.0X0.50 89.6X0.30 90.8× 0.40 125.7X0.35 Outer diameter×wall thickness 15.4×0.20 32.4×0.20 41.2×0.60 59.6×0.3 0 61.2×0.60 75.5X0.25 89.8X0.40 95.6×0.30 150.8×0.40 18.4X0. 20 35.0X0.50 48.0×0.25 60.0×0.25 67.6X0.30 75.6X0.30 90.2X0. 40 101×0.50 250.8×0.40 20.4X0.20 40.4×0.20 50.5×0.25 60.0×0.50 67.8×0.40 82.8X0.40 90.5X0.25 102.6X0.30 The inner diameter of the steel pipe is generally not checked and is guaranteed by the core rod diameter. The allowable deviation of the core rod diameter shall comply with the provisions of Table 2. 1.3 Allowable deviation of wall thickness The allowable deviation of the wall thickness of the steel pipe shall comply with the provisions of Table 3. Table 3 Ordinary grade Page 4 "Galvanized welded steel pipe for low-pressure fluid transportation" 3091-1993 Steel pipe size 1.4 Length 1.4.1 Normal length The normal length of the steel pipe is 0.5 to 6m. 1.4.2 Fixed length Ordinary grade Allowable deviation of wall thickness The fixed length of steel pipe should be within the normal length range, and the allowable deviation of its length is 1.4.3 Multiple length Page 5 "Galvanized welded steel pipe for low pressure fluid transportation" Building 3091-1993 The multiple length of steel pipe should be within the normal length range, and a 5mm cut margin should be left for each multiple length. The allowable deviation of the total length is 0mm. 1.5 Curvature The curvature of the steel pipe per meter should not exceed 5mm. WW .sinoa 1.6 Appearance The appearance of the steel pipe is not allowed to be twisted 1.7 Delivery weight The steel pipe is delivered by actual weight. 1.8 Marking example The ultra-thin wall steel pipe made of 1Cr18Ni9Ti steel with an outer diameter of 60mm and a wall thickness of 0.25mm is marked as: Ultra-thin pipe 1Cr18Ni9Ti-60X0.25—GB3089-82 "Low 3091-19 Page 6 2.1 Grade and chemical composition 2 Technical requirements The grade and chemical composition of steel used for steel pipes shall comply with the provisions of Table 4. Table 4 Chemical composition, % ≤0.30≤0.035 8.00~12.00 8.00~11.00 12.00~16.00 11.00~14.00 11.00~14.00 Note: According to the requirements of the purchaser, steel pipes with grades other than those specified in Table 4 can be produced by agreement between the two parties. 2.2 The allowable deviation of the chemical composition of the finished steel pipe shall comply with the provisions of Table 5. Table 5 5(c%-0 5(c%-0 5(c%-0 .02)~ Page 7 Welded Steel Pipe for Low-Pressure Fluid Transportation 3091-1993 Element Name Applicable Range% >0.03~0.20 2.3 Smelting Method Allowable Deviation% Element Name Applicable Range% >10. 00~20. 00 >7.50~20.00 Allowable deviation% Steel shall be smelted in electric furnace or electric slag furnace. Other smelting methods that meet the requirements of this standard may also be adopted by agreement between the two parties. 2.4 Delivery status Steel pipes are delivered in heat-treated state. If the purchaser requires delivery without heat treatment, the bending degree, mechanical properties and intergranular corrosion test of the steel pipe shall not be inspected. 2.5 Mechanical properties The mechanical properties of the steel pipe shall comply with the provisions of Table 6. Serial number 00Cr18Ni1 0 1Cr18Ni9Ti 00Cr17Ni14Mo2Ti 1Cr18Ni12Mo2Ti 1Cr18Ni12Mo3Ti 2.6 Chemical properties Tensile strength o.kgf/mm2(MPa) Not less than 45(441) 56(549) 49(481) 55(539)||tt ||55 (539) Elongation Steel pipes shall be tested for intergranular corrosion tendency according to the T method, and the test results shall not show intergranular corrosion tendency. 2.7 Surface quality The inner and outer surfaces of the steel pipe shall be smooth, and the smoothness shall not be less than 6. The inner and outer surfaces of the steel pipe shall not have cracks, folds, scaly thorns, spots, metal tumors, pitting and mesh corrosion caused by pickling, abrasions with a depth exceeding the negative deviation of the wall thickness, Page 8 Galvanized welded steel pipes for high-pressure fluid transportation》 3091-1993 Pit and indentation. Slight spiral corrugation, silk marks and undamaged concave surface as well as scratches and punctures with a depth not exceeding 0.015mm are allowed. w.sinoaec.comwww.bzxz.net Connecting steel pipes》 《Low-pressure Fluid vehicle Transportation 3091-19 Page 9 3 Test method 3.1 The size of the steel pipe shall be measured one by one with a caliper or micrometer. 3.2 The inner and outer surfaces of the steel pipe shall be inspected one by one with the naked eye3.3 The chemical and mechanical test methods for steel pipes shall comply with the provisions of 7. Table 7 Number of samples taken in each batch, pieces Chemical analysis Tensile test Intergranular corrosion 2 (taken on different steel pipes) 2 (taken on different steel pipes) Test method GB222—63 GB223—63, 81 YB35—78 GB228—76 GB1223—75 Page 10 sinoaec.com "Galvanized welded steel pipe for low-pressure fluid transportation" Material code 3091-1993 w.sinoaec.col Steel pipes are inspected and accepted in batches. Each batch shall consist of steel pipes of the same grade, furnace (tank) number, specification and heat treatment system. 4 Inspection rules The re-inspection and judgment rules of steel pipes shall comply with the provisions of GB2102-80 "Steel Pipe Acceptance, Packaging, Marking and Quality Certificate Inspection and acceptance of steel pipes shall be carried out by the supplier's technical supervision department. The sampling quantity of the tensile test and intergranular corrosion test of steel pipes shall comply with the provisions of Table 7. 4.1 Inspection and acceptance 4.2 Batching rules 4.3 Sampling quantity 4.4 Re-inspection and judgment rules General provisions". Galvanized Welded Steel Pipes for Fluid Transportation》 3091-1993 Page 11 5 Packaging, Marking and Quality Certificate 5.1 Steel pipes should be packed one by one or bundled into small bundles before packing. The packaging box should be lined with moisture-proof wax paper and filled with foam or soft items. There should be labels inside and outside the packaging box, indicating: supplier name, brand, specification, quantity, furnace (tank) number and w.sinoaec. batch number, packaging date. 5.2 Steel pipes should be accompanied by a quality certificate. Indicate: supplier name, contract number, brand, furnace (tank) number and batch number, specifications and quantity, various test results, standard number, galvanized welded steel pipe for fluid transportation, low pressure 3091-1993, page 12 Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.