GB 4706.78-2005 Safety of household and similar electrical appliances Part 2: Particular requirements for pedestrian-controlled electric lawn mowers
Some standard content:
[CS 25. 140. 2C
National Standard of the People's Republic of China
GB4706.78—2005/1FC60335-2-77.2002 Safety of household and similar electrical appliances-Particular requirements for pedestrian controlled mains-operated lawnmowers
(IFC: 60335 2 77:2002, IDT
2005-01-18 Issued
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China Standardization Administration
2005-08-01 Implementation
Referenced documents
General technical requirements
General conditions for test
Marking and instructions
Protection of live parts of electrical equipment
Starting of electric motors
Power and safety
Safety regulations
Working short, let the end current flow under the condition of gas flow to prove the
Rate...
Quick leakage current and electrical strength
Load protection of transformers and related equipment
Pre-durability||tt ||Non-formal business
Statutory and mechanical hazards….
Sensitive pressure
Recognition department book
Shanyuan connection and external money line
External wiring Rui
Connection pool push implementation
Explosive connection
Fear of the minister's code and deep also absolutely practice him still
Overheat resistant and flame-retardant and electrical starting materials
, and category color courtyard
Appendix AA normative appendix)
Appendix RH (instructional appendix:
Yin record ("(now must be born record)
Appendix protection internal principles
Design and construction
Flying use holding test compilation health fire bottom surface
GB 4756.78—20D5/LEC 60335-2-77:200214
GB4/06.78—2005/IFC60335-2-77.2002Appendix DD (Model Appendix)
Time Appendix EE (Material Appendix)
Figure 103
Figure 101
Figure 105
Figure 108
Figure 109
Figure 112
Figure 113
Dyeing area city
Flying structure test standard and recommended test area Test report and requirements
Front Ruikai limit range single-axis grass scraper
Front belt wellhead limit range belt-multi-axis grass making
is the shape of the test
Handle length
Roller protection
Roller penetration side minimum anti-expansion
The mouth is made of non-slurry and rear discharge equipment drum protection front teaching material to get the equipment of the dense simple rear belt protection
Roller grass flying moon stealing
Shenshi test start bone
Give internal dramatic test
Hand thrown continuous impact test leather set
Figure BB. 1
Because of the heart 2
Determination of standard opening 1
Flying electric material test device
Single grass machine
Each axis cutting Zhuza
Total layout
A test overview:
The test week training
Monitor the city and bottom surface
Wave effect hard according to the development of love and use of test equipment with material test equipment bone heat Li inspection
Test equipment bottom surface distribution diagram|| tt||LingAA,1
Enough scope
G Li Su·
Round color opening and position
Table>,1"5 throw away the test of the mixing camp number system record list table FF.1IEC: the relationship between the clause and ISUEHU5 table EE21K the relationship between the drawing and IS39jin table FFEC appendix and SOSS between
All technical contents of this part are mandatory. Language
GB 4706.78—2005/IEC 60335-2-77:2002 The ES0335 series of electric tools, formulated and issued by the International Safety Committee IESC61F Subcommittee, include: Special requirements for walk-behind and hand-held grass making machines, grass rowing machines (corresponding to 1F335->-91!): Special requirements for electric grass making machines for pedestrians: ECi0235-2-77: Special requirements for scissors-type grass makers (corresponding to 1ECS0335\94); Special requirements for electric lifting machines and loose sand machines controlled by cards (corresponding to 6-2-2): Special requirements for special-purpose blowing and pinning machines, and special requirements for dual-purpose blowing and suction machines (corresponding to 1F:33.-2-1). This type of product range includes the general safety requirements for the two major categories of hand-held and portable tools. In addition to the non-secret provisions of this national standard, this part shall be used in conjunction with IE30335-1:20 (1st edition 3 household micro-electric appliances safety part 1: general requirements. Write "applicable to\" to indicate that the bottom clause of C335-1 is applicable to this part. If the part is called\, the system text in this part shall be used as the basis for this part + write "transfer point", and the corresponding clause of 1E6C335-1 at the end of the table shall be modified by this part. The "armor" in the part is used as the standard, and the "armor" in the text is still used in general: the part written "armor" indicates that in addition to complying with the requirements of E6035-, it also complies with the requirements in this part. The appendixes AA, X, and DD are normative, and the appendix FE is informative. The part is not in accordance with GB\11.2008 standardization work record Shenzhen Part 1: Structure of the standard analysis and compilation of the standard part proposed by the China Electrical Equipment Industry Association and the China Electric Equipment Standardization Technical Committee (AC). This part was drafted by the Shanghai Power Tools Research Institute. This part was mainly drafted by Zheng Dingan and Wen Jiang, and was implemented by the State Council. GB 4705.78 2005/1H: 50335-2-77,2002 Introduction
The above 1 is calculated according to the method of fast maintenance of the tail engineer and the two soldiers that can be used in multiple ways. The safety performance requirements of the two provinces are also different. The international local committee (I:61 technical committee) has formulated the TEC6G715 series electric transfer safety system standard for the 1E:22 series portable electric tools. 1 standard is equivalent to the GBS33 series standard and the GB155 series standard. The piece of hand-held and portable electric tool safety certification is in line with the Yayoi. With the human protection of the natural environment, the development of electric tools used for national art operations has also led to the development of the international electric committee (6:61 technical committee) in the 21st century. The group of members of the international standard (61) has not yet completed the research on the safety standards of electric tools for operation, and the first edition was released in 19. In 203, the second edition was formed: F/452/D15) and voting consultation? Standard document wood. Voting report gas 1F/472/RVD.
FS61F is the 61st academic addition "real. And class collection Jin road nine equipment safety and sharing of the division of the committee to develop automatic two equipment safety certification, electric tools most dynamic, its small category products. The beginning of this chapter is for the training of the people and professionals to enter the fast, wood part of the recognized technical instructions is the international public to the equipment according to the instructions before manufacturing when the normal operation of the mountain to prevent the electrical, mechanical. Overheating, fire and radiation hazards of the technical instructions. The technical division also includes the application of the visible abnormal light replacement as part of the six parts of the B15\ requirements, so that when the device is connected to the online rules soldiers have a huge capacity. If the standard of this section is also equipped with (706 part 2 protection tour and other equipment can be state! Medical price material function before the corresponding part 2 applies: if more meters, should consider the uniform performance of the 5 parts of the core light management is a safe product travel standard: Uber" involves other standards in the day car standard delivery of the specific structure does not have to consider the actual safety principles of other standards, if the registration and test to show the reaction to the full level of the book to negotiate other features if the equipment adopts part of the requirements outside the requirements, then the safety limit outside this part of the content for the whole test and test is complete, etc., called the error in the part R6 electric model [
1 range
GB4706.78-2CD5/[IC 60335-2-77:2002 Safety of household and similar electrical appliances Particular requirements for pedestrian-controlled electric lawn mowers TEC-1 This part applies to the safety of pedestrian-controlled electric lawn mowers intended for domestic and similar purposes, including rotary or rotary machines whose fixed power supply is a single-phase or multiple-phase device, or a rotary machine with multiple non-residual components. These cutting devices are designed to be centrifugal and have a single-phase control unit. The device is not kinetic energy 1. And the cutting device cannot be replaced by the manufacturer's metal pressure or other rigid materials. This part does not consider: the use of the device under the condition of no monitoring, the single session can play properly. The standard situation wave: the department does not include the machine grass science. The standard reference is established. Except for the following documents, this part of 0335-1 is applicable to this month: Measures: G/422 paper I Kang's standard tS275620 01)
420-2 square machine city company body shape counter-planning and hundred peach small room (IS3:) work absolutely. Agricultural heat pulling machine and machine manufacturing, flat and four-power machine shaking replacement notification camera machine specifications and other indications and symbols Part 1: Communication number () 37-: 1991) G69.320: Agricultural traction technology and enjoyment of bad and art movement long work consideration number machine will be the actual six installation calculation number Part 1: Benefit social return art movement hunger symbol (137573: 199122320] safety color ecS088
B3-1906 safety mark 1S1 86: 1084)
395: 19 Automatic grass making machine, station tractor. Single-terrain and state-owned tractor with scraper and cutting device. Definition, installation requirements and test procedures!
3 Definition
In addition to the following provisions: E6335. This competition is suitable for 3.! .90 is converted to:
Normal operation
The device shall operate under the following conditions:
It can operate under the specified power and its load must reach the rated age. 3. 101
J||blade
when used in warnings and instructions for use: terminology for devices! 1
GH 4706.78—2055/IEC 60335-2-77,20023.102
brake system
: combination of one or more brakes and related operating devices and control solutions3.103
controllernntrml
controls a device or structure that only operates or directs a specific media. 3.104
cutting to the axis cuttingmeans
! The agent is also! The body of the witness3.105
cutting judgment device (military light)cottlngmeanscnclusurehansingpressure" for planning control to provide protection for the country or other parts. 3.106
cutting device tip valve
cutting nkeuus tip cirle
the scraper stomach total external point system its axis rotation through the described end mountain track. 3.107
cutting position cuungmsitian
brake machine manufacturer world designed cutting device to hit the high pursuit of no compensation, 3. 100
cutting width
upward feeding time, cutting device can be, the piece by the cutting ruler or cutting line to be calculated by the line bottom
crushing drum type apple machine limclemnwer
information and a system of two-beat residual water, with a fixed knife or tool as the shearing fee of the cutting device world machine 3. 10
discharge description discharge chute
cutting machine non-opening part, used to control the material from the cutting agent to the world 3.111
dischurgeopening
can be used as a cutting machine, which has only one cutting unit rotating on the axis of the cutting plane and cuts by force
sharing device rasycateher
using a female Zhuo or releasing part or a combination of parts, 3. 114
a device or accessory that can protect the operator and the present person, 3. 115
handlehandle
{what may be required in normal use to control the front part of the device. 3.116
Important inspection of projectiles in all relevant layers of the board material, 3.117
Floating lawn mowers herm(nre
Using air lift instead of rollers as ground support, 3.119
Intended use intentionlust
C8 4706.78—2906/1EC:60235-2-772002 Any use in accordance with the instructions of the society, ... 120
lawn edge trimmer
lawn edge trimmer
surface trim your lawn.
lawn edge trimmer (lawnmnwer (amawer) its scraping bone rotates in a plane approximately parallel to the ground, the height of the cutting head is determined by the drop wheel, air guard or guide rail, etc. The motor is used as the driving method! Single tool, 3.122
excellent trimmer lawn edge trimmer
Replacement of the convex cutting device with a flat surface and high-quality electric scraper, which may be assisted by rollers or guides, etc. 3.123
Version high motor speed asipeligmutured as specified by the manufacturer and/or the instruction manual: the following extension when 1 port, the machine reaches the extension of the high swivel seat, 3.124
Mowing attachment
Equipped with a swivel attachment that can be easily removed from the appliance, usually to restore the appliance to its original position on the ground, 3. -25
The minimum value available under rated load or (for rolling simple type single machine, the actual rating value is not rolling simple: : 3.127
apetnrconirol
Operator controller
What is the need for the operator to frequently perform the specified function of the cooling device 3
4706.78—7C05/[C60335-2//.2023.12B
peratorpresenee 3.129
Operator's operating area
The lawn mower can be switched to a stand or as shown in Figure 101. 3.130
parkinubruke
park the lawn mower
A kind of equipment in the machine, which can benefit you! After operation, in the absence of the operator, the lawn mower can be operated and stopped from the upper part, and the technical function of the lawn mower is maintained. The lawn mower with pedestrian control is a lawn mower that is controlled by the operator and needs to be manually operated or disconnected. 3.132
pwer gear
power regulator
motor for point-to-point motion and rotational motion to provide mechanical energy. 3.133
Irolary mower
disc mower
machine with internal components that are not cut, vertically above the surface of the machine, 3.134
travel brake
service brake
main brake used to reduce the speed of travel and stop the machine. 3.135
machine with blades or blades that form a shearing motion. 3.1.36
Braking time siagpinglim
The time for the part to come to rest
The maximum rate of throw line (drum mower) thruwliue (cylindernrwer) in the vertical plane, in direct load-carrying direction and in contact with the cutting roller, without contact with other devices or other distribution devices: Figure
The dangerous thrownobjcelhuazunl operation of the flying object requires the use of a moving object to allow the device to start from the east. 3.139
The traction mechanism traetiundrise
Used to transmit the force source to the ground to send the moving device back to the ground) 4 General requirements
Except as specified in the accompanying document E331 - This is not applicable. 4.1 For the accessories of the equipment which are manufactured and put into use by the ten countries, the equipment still complies with the requirements of this part of the electrical and mechanical standards, and the following provisions are added: 1.5.5 of this chapter of E335-1: CD 4706.78—2005/FC60335-2-77:2002. In the test period, the test conditions and lubrication requirements specified in the instruction manual shall be followed. In the case of the adjustment rate of the commercial type, the adjustment control device shall be increased in the case of the increase in the continuous speed of the control device. In addition, the following provisions of this category apply: 6.5.1 of this chapter of E335-1: CD 4706.78—2005/FC60335-2-77:2002. In the test period, the test conditions and lubrication requirements specified in the instruction manual shall be followed. In the case of the adjustment rate of the commercial type, the adjustment rate of the control device shall be increased in the case of the increase in the continuous speed of the control device. 6.1 is changed to:
In terms of protection against electric shock, it shall be classified as Class II and shall be tested by appropriate tests.
6.2 Add:
The appliance shall be of type 1P4 at least.
7. Marking and instructions
The following provisions apply to this clause of [IEC6035-1]. 7.1]:
The appliance shall be marked with the rated input power
The warning symbol shall be located at the visible part of the appliance. The full text shall be 1mr, yellow and black, with appropriate 1EC/5 symbols or pictograms, and the marking shall be displayed. The symbol giving the warning information shall be located near the hazard. General:
Before maintenance, cleaning or repair, or before untangling the mains or checking whether it is damaged, remove the plug from the mains. Read the instruction manual; do not let soft power supplies get close to cutting tools; after the machine power is turned off, its parts are rotating; the pull-plate type brake car should be marked with a blue connector; when using the blue connector, the driver should use the blue connector in this position. When there is enough soft power, the grass making machine can be used. 7.6 Note: The following paragraphs shall be amended as follows: For example, for the control devices specified in 2.-.1, except for the obvious purpose, the rest of the devices shall have a label or certificate clearly indicating the operating direction. 7.12 shall be amended as follows: (-50:28) GB 47C6.78—2005/1EC 60335-2-77:2002 Instructions for use should be included with the device. The instructions for use should include the following: a) Requirements and practical operation steps according to the specifications. b) The device is not equipped with a complete manual. The instructions for use should include the following: a) Warnings and practical operation steps according to the specifications. b) Warnings and practical operation steps. The instructions for use should include the following: a) Warnings and practical operation steps according to the specifications. b) Warnings and practical operation steps. The instructions for use should include the following: The suggestion is that the device should only be activated by a residual current of no more than 0mA. According to the RCD1 circuit, the user should use the following circuit breaker:
The selection of the external conductor used and the maximum length (not less than the requirements in 23.7) are included in the suggestion, that is, the device should only be activated by a residual current of no more than 0mA. According to the RCD1 circuit, the user should use the following circuit breaker:
The selection of the external conductor used and the maximum length (not less than the requirements in 23.7) are included in the suggestion: 5: Suitable for use, click on the following list:
1 training plan
storage system Read the instructions and make sure not to use the device properly: do not allow children to touch or scratch the device at any time. Understand the instructions and use the device. 3. Do not use the device when children or other people are around. 4. Do not use the device in a manner that may cause external injury or danger to others. 5. Always wear sturdy socks and other items when using the device. Do not open the device.
Check the working area of the balancer, eliminate the stones, debris, rope bones and other objects saved, and use the inner eye bag before use. Pay attention to the rotation parts and blade parts without wear and damage, and replace the parts without moisture or damage in a timely manner to keep the semi-capable
one-to-many knives can be used, and the force should be clean. Only the rotation of the hole will cause other rotations. 3. Use the tool under one month or good artificial light:! Avoid stopping the vehicle on wet ground if possible; Walk, don't run, always stop on slopes, don't stand straight down; Be careful when going over a slope, be careful when backing up or pulling; When moving the equipment to the working area or high ground, do not move the equipment; Do not select the gear that is not defective or to be completed; Do not turn the motor when it is warm or when the parts are light; Do not delay the movement of the electric motor. But there must not be a slight side of the number of equipment hazards, this situation is only the pre-planned cost of the equipment must not exceed the actual need to be repaired, the child instrument mentioned its operation down the first part, deep its general ground before, to ensure that it is in the replacement position: do not put the parts of the turntable near it. The turntable control machine. The high-speed discharge port can only be cleaned when the motor is running, the cutting support is or the belt device! In the following circumstances, remember, etc. to pick up the oil head and pull it off: the oil can be removed from the lifting device;
Before clearing the blockage:
Before inspecting, staining or maintaining the H:
GR4706.78-2005/TFF60335-2-77:2002 group to the foreign body after the specification of the equipment as much as possible, if necessary, to carry out maintenance: when the county starts to shake the case immediately!
1) Continue to protect and maintain all equipment in the car
, screw and nail protection technology. Make sure the work steps are complete and the equipment is fully checked: replace the worn and damaged parts according to the requirements to ensure safety! Be careful at the beginning of the adjustment, and make sure the equipment and the week are in good condition.
For the whole system, the replacement ratio is not guaranteed. In addition to the following provisions, Eo "this single recent, Liu Shi [type gas machine, the cup is used to control the stomach and the cup is used to control the stomach and the cup is used to control the stomach and the cup is used to control the stomach and the cup is used to control the cup. Except for the case where tools are needed, this standard will be used as the main point of this standard! The full range of live points can be reduced and the starting point of the electric appliance can be changed to the text of 1F4033-1. Replace it with the following provisions: centrifugal switch and other automatic starters and close them. Or, the month is off the head. 1. The lower rated voltage is the lower limit of the rated self-voltage range of the system. The controller is installed in the E room. The speed is set in the teaching room. The equipment should only be used for the safety diagnosis without affecting the input power and current. The rest of the following provisions are excluded. 1. This chapter proves that "0.1 is not: 11 heating IFt t03:-1 This applies. 12 empty chapter 13 world slip current and electrical strength under the working stealth degree 335 this state 14 transient overload voltage 1263335-this use5 Additions:
CD 4706.78—2005/[FC60335-2-77:2002 In the test data, the cutting table should be made according to the test data specified in the instruction manual. In the case of the adjustment rate, the adjustment control device should be increased in the same way as the adjustment control device. 6 Classification
The following provisions of this standard apply. 6.1 is changed to:
In the case of protection against electric shock, it should be classified as Class II, and the corresponding test data should be observed.
6.2 Additions:
The appliance should be of type 1P4.
7. Marking and instructions
The following provisions apply. [This clause of EC6035-1 applies. 7.1]:
The device is marked with the rated input power
The warning information is located at the visible part of the terminal. The full text is 1mr, yellow and black, with appropriate EC/5 symbols or pictograms, and the markings should be used. The markings and symbols giving warning information should be located near the hazard area. General:
Before maintenance, cleaning or repair, or before untangling the power cord or checking it for damage, remove the plug from the power supply. Read the instruction manual; do not let soft power supplies get close to cutting tools; after the machine power is turned off, its parts are rotating; the pull-plate type brake car should be marked with a blue connector; when using the blue connector, the driver should use the blue connector in this position. When there is enough soft power, the grass making machine can be used. 7.6 Note: The following paragraphs shall be amended as follows: For example, for the control devices specified in 2.-.1, except for the obvious purpose, the rest of the devices shall have a label or certificate clearly indicating the operating direction. 7.12 shall be amended as follows: (-50:28) GB 47C6.78—2005/1EC 60335-2-77:2002 Instructions for use should be included with the device. The instructions for use should include the following: a) Requirements and practical operation steps according to the specifications. b) The device is not equipped with a complete manual. The instructions for use should include the following: a) Warnings and practical operation steps according to the specifications. b) Warnings and practical operation steps. The instructions for use should include the following: a) Warnings and practical operation steps according to the specifications. b) Warnings and practical operation steps. The instructions for use should include the following: The suggestion is that the device should only be activated by a residual current of no more than 0mA. According to the RCD1 circuit, the user should use the following circuit breaker:
The selection of the external conductor used and the maximum length (not less than the requirements in 23.7) are included in the suggestion, that is, the device should only be activated by a residual current of no more than 0mA. According to the RCD1 circuit, the user should use the following circuit breaker:
The selection of the external conductor used and the maximum length (not less than the requirements in 23.7) are included in the suggestion: 5: Suitable for use, click on the following list:
1 training plan
storage system Read the instructions and make sure not to use the device properly: do not allow children to touch or scratch the device at any time. Understand the instructions and use the device. 3. Do not use the device when children or other people are around. 4. Do not use the device in a manner that may cause external injury or danger to others. 5. Always wear sturdy socks and other items when using the device. Do not open the device.
Check the working area of the balancer, eliminate the stones, debris, rope bones and other objects saved, and use the inner eye bag before use. Pay attention to the rotation parts and blade parts without wear and damage, and replace the parts without moisture or damage in a timely manner to keep the semi-capable
one-to-many knives can be used, and the force should be clean. Only the rotation of the hole will cause other rotations. 3. Use the tool under one month or good artificial light:! Avoid stopping the vehicle on wet ground if possible; Walk, don't run, always stop on slopes, don't stand straight down; Be careful when going over a slope, be careful when backing up or pulling; When moving the equipment to the working area or high ground, do not move the equipment; Do not select the gear that is not defective or to be completed; Do not turn the motor when it is warm or when the parts are light; Do not delay the movement of the electric motor. But there must not be a slight side of the number of equipment hazards, this situation is only the pre-planned cost of the equipment must not exceed the actual need to be repaired, the child instrument mentioned its operation down the first part, deep its general ground before, to ensure that it is in the replacement position: do not put the parts of the turntable near it. The turntable control machine. The high-speed discharge port can only be cleaned when the motor is running, the cutting support is or the belt device! In the following circumstances, remember, etc. to pick up the oil head and pull it off: the oil can be removed from the lifting device;
Before clearing the blockage:
Before inspecting, staining or maintaining the H:
GR4706.78-2005/TFF60335-2-77:2002 group to the foreign body after the specification of the equipment as much as possible, if necessary, to carry out maintenance: when the county starts to shake the case immediately!
1) Continue to protect and maintain all equipment in the car
, screw and nail protection technology. Make sure the work steps are complete and the equipment is fully checked: replace the worn and damaged parts according to the requirements to ensure safety! Be careful at the beginning of the adjustment, and make sure the equipment and the week are in good condition.
For the whole system, the replacement ratio is not guaranteed. In addition to the following provisions, Eo "this single recent, Liu Shi [type gas machine, the cup is used to control the stomach and the cup is used to control the stomach and the cup is used to control the stomach and the cup is used to control the stomach and the cup is used to control the cup. Except for the case where tools are needed, this standard will be used as the main point of this standard! The full range of live points can be reduced and the starting point of the electric appliance can be changed to the text of 1F4033-1. Replace it with the following provisions: centrifugal switch and other automatic starters and close them. Or, the month is off the head. 1. The lower rated voltage is the lower limit of the rated self-voltage range of the system. The controller is installed in the E room. The speed is set in the teaching room. The equipment should only be used for the safety diagnosis without affecting the input power and current. The rest of the following provisions are excluded. 1. This chapter proves that "0.1 is not: 11 heating IFt t03:-1 This applies. 12 empty chapter 13 world slip current and electrical strength under the working stealth degree 335 this state 14 transient overload voltage 1263335-this use5 Additions:
CD 4706.78—2005/[FC60335-2-77:2002 In the test data, the cutting table should be made according to the test data specified in the instruction manual. In the case of the adjustment rate, the adjustment control device should be increased in the same way as the adjustment control device. 6 Classification
The following provisions of this standard apply. 6.1 is changed to:
In the case of protection against electric shock, it should be classified as Class II, and the corresponding test data should be observed.
6.2 Additions:
The appliance should be of type 1P4.
7. Marking and instructions
The following provisions apply. [This clause of EC6035-1 applies. 7.1]:
The device is marked with the rated input power
The warning information is located at the visible part of the terminal. The full text is 1mr, yellow and black, with appropriate EC/5 symbols or pictograms, and the markings should be used. The markings and symbols giving warning information should be located near the hazard area. General: bZxz.net
Before maintenance, cleaning or repair, or before untangling the power cord or checking it for damage, remove the plug from the power supply. Read the instruction manual; do not let soft power supplies get close to cutting tools; after the machine power is turned off, its parts are rotating; the pull-plate type brake car should be marked with a blue connector; when using the blue connector, the driver should use the blue connector in this position. When there is enough soft power, the grass making machine can be used. 7.6 Note: The following paragraphs shall be amended as follows: For example, for the control devices specified in 2.-.1, except for the obvious purpose, the rest of the devices shall have a label or certificate clearly indicating the operating direction. 7.12 shall be amended as follows: (-50:28) GB 47C6.78—2005/1EC 60335-2-77:2002 Instructions for use should be included with the device. The instructions for use should include the following: a) Requirements and practical operation steps according to the specifications. b) The device is not equipped with a complete manual. The instructions for use should include the following: a) Warnings and practical operation steps according to the specifications. b) Warnings and practical operation steps. The instructions for use should include the following: a) Warnings and practical operation steps according to the specifications. b) Warnings and practical operation steps. The instructions for use should include the following: The suggestion is that the device should only be activated by a residual current of no more than 0mA. According to the RCD1 circuit, the user should use the following circuit breaker:
The selection of the external conductor used and the maximum length (not less than the requirements in 23.7) are included in the suggestion, that is, the device should only be activated by a residual current of no more than 0mA. According to the RCD1 circuit, the user should use the following circuit breaker:
The selection of the external conductor used and the maximum length (not less than the requirements in 23.7) are included in the suggestion: 5: Suitable for use, click on the following list:
1 training plan
storage system Read the instructions and make sure not to use the device properly: do not allow children to touch or scratch the device at any time. Understand the instructions and use the device. 3. Do not use the device when children or other people are around. 4. Do not use the device in a manner that may cause external injury or danger to others. 5. Always wear sturdy socks and other items when using the device. Do not open the device.
Check the working area of the balancer, eliminate the stones, debris, rope bones and other objects saved, and use the inner eye bag before use. Pay attention to the rotation parts and blade parts without wear and damage, and replace the parts without moisture or damage in a timely manner to keep the semi-capable
one-to-many knives can be used, and the force should be clean. Only the rotation of the hole will cause other rotations. 3. Use the tool under one month or good artificial light:! Avoid stopping the vehicle on wet ground if possible; Walk, don't run, always stop on slopes, don't stand straight down; Be careful when going over a slope, be careful when backing up or pulling; When moving the equipment to the working area or high ground, do not move the equipment; Do not select the gear that is not defective or to be completed; Do not turn the motor when it is warm or when the parts are light; Do not delay the movement of the electric motor. But there must not be a slight side of the number of equipment hazards, this situation is only the pre-planned cost of the equipment must not exceed the actual need to be repaired, the child instrument mentioned its operation down the first part, deep its general ground before, to ensure that it is in the replacement position: do not put the parts of the turntable near it. The turntable control machine. The high-speed discharge port can only be cleaned when the motor is running, the cutting support is or the belt device! In the following circumstances, remember, etc. to pick up the oil head and pull it off: the oil can be removed from the lifting device;
Before clearing the blockage:
Before inspecting, staining or maintaining the H:
GR4706.78-2005/TFF60335-2-77:2002 group to the foreign body after the specification of the equipment as much as possible, if necessary, to carry out maintenance: when the county starts to shake the case immediately!
1) Continue to protect and maintain all equipment in the car
, screw and nail protection technology. Make sure the work steps are complete and the equipment is fully checked: replace the worn and damaged parts according to the requirements to ensure safety! Be careful at the beginning of the adjustment, and make sure the equipment and the week are in good condition.
For the whole system, the replacement ratio is not guaranteed. In addition to the following provisions, Eo "this single recent, Liu Shi [type gas machine, the cup is used to control the stomach and the cup is used to control the stomach and the cup is used to control the stomach and the cup is used to control the stomach and the cup is used to control the cup. Except for the case where tools are needed, this standard will be used as the main point of this standard! The full range of live points can be reduced and the starting point of the electric appliance can be changed to the text of 1F4033-1. Replace it with the following provisions: centrifugal switch and other automatic starters and close them. Or, the month is off the head. 1. The lower rated voltage is the lower limit of the rated self-voltage range of the system. The controller is installed in the E room. The speed is set in the teaching room. The equipment should only be used for the safety diagnosis without affecting the input power and current. The rest of the following provisions are excluded. 1. This chapter proves that "0.1 is not: 11 heating IFt t03:-1 This applies. 12 empty chapter 13 world slip current and electrical strength under the working stealth degree 335 this state 14 transient overload voltage 1263335-this use1 For all controllers except those with obvious purpose, the rest should have labels or certificates clearly indicating their operating directions and operating methods. 7.12 Change to:
(-50: conversion 28
GB 47C6.78—2005/1EC 60335-2-77:2002 Instructions for use should be provided with the device. The instructions for use should include the following: a) The requirements should be in accordance with the corresponding warnings and operating steps. b: The device is not equipped with a complete manual. The relevant manual should be used for the installation of the device. It should also include the warnings of the device, "Caution! Do not transfer and circulate!" d) About the safe operation of the device The suggestion is that the device should only be activated by a residual current of no more than 0mA. According to the RCD1 circuit, the user should use the following circuit breaker:
The selection of the external conductor used and the maximum length (not less than the requirements in 23.7) are included in the suggestion, that is, the device should only be activated by a residual current of no more than 0mA. According to the RCD1 circuit, the user should use the following circuit breaker:
The selection of the external conductor used and the maximum length (not less than the requirements in 23.7) are included in the suggestion: 5: Suitable for use, click on the following list:
1 training plan
storage system Read the instructions and make sure not to use the device properly: do not allow children to touch or scratch the device at any time. Understand the instructions and use the device. 3. Do not use the device when children or other people are around. 4. Do not use the device in a manner that may cause external injury or danger to others. 5. Always wear sturdy socks and other items when using the device. Do not open the device.
Check the working area of the balancer, eliminate the stones, debris, rope bones and other objects saved, and use the inner eye bag before use. Pay attention to the rotation parts and blade parts without wear and damage, and replace the parts without moisture or damage in a timely manner to keep the semi-capable
one-to-many knives can be used, and the force should be clean. Only the rotation of the hole will cause other rotations. 3. Use the tool under one month or good artificial light:! Avoid stopping the vehicle on wet ground if possible; Walk, don't run, always stop on slopes, don't stand straight down; Be careful when going over a slope, be careful when backing up or pulling; When moving the equipment to the working area or high ground, do not move the equipment; Do not select the gear that is not defective or to be completed; Do not turn the motor when it is warm or when the parts are light; Do not delay the movement of the electric motor. But there must not be a slight side of the number of equipment hazards, this situation is only the pre-planned cost of the equipment must not exceed the actual need to be repaired, the child instrument mentioned its operation down the first part, deep its general ground before, to ensure that it is in the replacement position: do not put the parts of the turntable near it. The turntable control machine. The high-speed discharge port can only be cleaned when the motor is running, the cutting support is or the belt device! In the following circumstances, remember, etc. to pick up the oil head and pull it off: the oil can be removed from the lifting device;
Before clearing the blockage:
Before inspecting, staining or maintaining the H:
GR4706.78-2005/TFF60335-2-77:2002 group to the foreign body after the specification of the equipment as much as possible, if necessary, to carry out maintenance: when the county starts to shake the case immediately!
1) Continue to protect and maintain all equipment in the car
, screw and nail protection technology. Make sure the work steps are complete and the equipment is fully checked: replace the worn and damaged parts according to the requirements to ensure safety! Be careful at the beginning of the adjustment, and make sure the equipment and the week are in good condition.
For the whole system, the replacement ratio is not guaranteed. In addition to the following provisions, Eo "this single recent, Liu Shi [type gas machine, the cup is used to control the stomach and the cup is used to control the stomach and the cup is used to control the stomach and the cup is used to control the stomach and the cup is used to control the cup. Except for the case where tools are needed, this standard will be used as the main point of this standard! The full range of live points can be reduced and the starting point of the electric appliance can be changed to the text of 1F4033-1. Replace it with the following provisions: centrifugal switch and other automatic starters and close them. Or, the month is off the head. 1. The lower rated voltage is the lower limit of the rated self-voltage range of the system. The controller is installed in the E room. The speed is set in the teaching room. The equipment should only be used for the safety diagnosis without affecting the input power and current. The rest of the following provisions are excluded. 1. This chapter proves that "0.1 is not: 11 heating IFt t03:-1 This applies. 12 empty chapter 13 world slip current and electrical strength under the working stealth degree 335 this state 14 transient overload voltage 1263335-this use1 For all controllers except those with obvious purpose, the rest should have labels or certificates clearly indicating their operating directions and operating methods. 7.12 Change to:
(-50: conversion 28
GB 47C6.78—2005/1EC 60335-2-77:2002 Instructions for use should be provided with the device. The instructions for use should include the following: a) The requirements should be in accordance with the corresponding warnings and operating steps. b: The device is not equipped with a complete manual. The relevant manual should be used for the installation of the device. It should also include the warnings of the device, "Caution! Do not transfer and circulate!" d) About the safe operation of the device The suggestion is that the device should only be activated by a residual current of no more than 0mA. According to the RCD1 circuit, the user should use the following circuit breaker:
The selection of the external conductor used and the maximum length (not less than the requirements in 23.7) are included in the suggestion, that is, the device should only be activated by a residual current of no more than 0mA. According to the RCD1 circuit, the user should use the following circuit breaker:
The selection of the external conductor used and the maximum length (not less than the requirements in 23.7) are included in the suggestion: 5: Suitable for use, click on the following list:
1 training plan
storage system Read the instructions and make sure not to use the device properly: do not allow children to touch or scratch the device at any time. Understand the instructions and use the device. 3. Do not use the device when children or other people are around. 4. Do not use the device in a manner that may cause external injury or danger to others. 5. Always wear sturdy socks and other items when using the device. Do not open the device.
Check the working area of the balancer, eliminate the stones, debris, rope bones and other objects saved, and use the inner eye bag before use. Pay attention to the rotation parts and blade parts without wear and damage, and replace the parts without moisture or damage in a timely manner to keep the semi-capable
one-to-many knives can be used, and the force should be clean. Only the rotation of the hole will cause other rotations. 3. Use the tool under one month or good artificial light:! Avoid stopping the vehicle on wet ground if possible; Walk, don't run, always stop on slopes, don't stand straight down; Be careful when going over a slope, be careful when backing up or pulling; When moving the equipment to the working area or high ground, do not move the equipment; Do not select the gear that is not defective or to be completed; Do not turn the motor when it is warm or when the parts are light; Do not delay the movement of the electric motor. But there must not be a slight side of the number of equipment hazards, this situation is only the pre-planned cost of the equipment must not exceed the actual need to be repaired, the child instrument mentioned its operation down the first part, deep its general ground before, to ensure that it is in the replacement position: do not put the parts of the turntable near it. The turntable control machine. The high-speed discharge port can only be cleaned when the motor is running, the cutting support is or the belt device! In the following circumstances, remember, etc. to pick up the oil head and pull it off: the oil can be removed from the lifting device;
Before clearing the blockage:
Before inspecting, staining or maintaining the H:
GR4706.78-2005/TFF60335-2-77:2002 group to the foreign body after the specification of the equipment as much as possible, if necessary, to carry out maintenance: when the county starts to shake the case immediately!
1) Continue to protect and maintain all equipment in the car
, screw and nail protection technology. Make sure the work steps are complete and the equipment is fully checked: replace the worn and damaged parts according to the requirements to ensure safety! Be careful at the beginning of the adjustment, and make sure the equipment and the week are in good condition.
For the whole system, the replacement ratio is not guaranteed. In addition to the following provisions, Eo "this single recent, Liu Shi [type gas machine, the cup is used to control the stomach and the cup is used to control the stomach and the cup is used to control the stomach and the cup is used to control the stomach and the cup is used to control the cup. Except for the case where tools are needed, this standard will be used as the main point of this standard! The full range of live points can be reduced and the starting point of the electric appliance can be changed to the text of 1F4033-1. Replace it with the following provisions: centrifugal switch and other automatic starters and close them. Or, the month is off the head. 1. The lower rated voltage is the lower limit of the rated self-voltage range of the system. The controller is installed in the E room. The speed is set in the teaching room. The equipment should only be used for the safety diagnosis without affecting the input power and current. The rest of the following provisions are excluded. 1. This chapter proves that "0.1 is not: 11 heating IFt t03:-1 This applies. 12 empty chapter 13 world slip current and electrical strength under the working stealth degree 335 this state 14 transient overload voltage 1263335-this useMake sure the whole working step is under the belt inspection, the grass device is full of white belts, the fire is removed: the replacement of the worn parts must be carried out according to the damaged parts to ensure safety! The business plan should be carefully adjusted at the best time, and the public device and the weekly interval must be ensured.
for the whole system of grass Kai-flow guarantee, the replacement ratio has not been made. In addition to the following provisions, Eo "this single recent, Liu Shi [type gas machine, the cup is used to control the stomach and the cup is used to control the stomach and the cup is used to control the stomach and the cup is used to control the stomach and the cup is used to control the cup. Except for the case where tools are needed, this standard will be used as the main point of this standard! The full range of live points can be reduced and the starting point of the electric appliance can be changed to the text of 1F4033-1. Replace it with the following provisions: centrifugal switch and other automatic starters and close them. Or, the month is off the head. 1. The lower rated voltage is the lower limit of the rated self-voltage range of the system. The controller is installed in the E room. The speed is set in the teaching room. The equipment should only be used for the safety diagnosis without affecting the input power and current. The rest of the following provisions are excluded. 1. This chapter proves that "0.1 is not: 11 heating IFt t03:-1 This applies. 12 empty chapter 13 world slip current and electrical strength under the working stealth degree 335 this state 14 transient overload voltage 1263335-this useMake sure the whole working system is under the belt inspection, the white belt is bent, the fire is removed, and the replacement of the worn parts must be carried out according to the replacement requirements to ensure safety! The business plan should be carefully adjusted at the best time, and the public equipment and the weekly interval must be ensured.
for the whole system of grass Kai-flow guarantee, the replacement ratio has not been made, and the agent table has not been made. In addition to the following provisions, Eo "this single recent, Liu Shi [type gas machine, the cup is used to control the stomach and the cup is used to control the stomach and the cup is used to control the stomach and the cup is used to control the stomach and the cup is used to control the cup. Except for the case where tools are needed, this standard will be used as the main point of this standard! The full range of live points can be reduced and the starting point of the electric appliance can be changed to the text of 1F4033-1. Replace it with the following provisions: centrifugal switch and other automatic starters and close them. Or, the month is off the head. 1. The lower rated voltage is the lower limit of the rated self-voltage range of the system. The controller is installed in the E room. The speed is set in the teaching room. The equipment should only be used for the safety diagnosis without affecting the input power and current. The rest of the following provisions are excluded. 1. This chapter proves that "0.1 is not: 11 heating IFt t03:-1 This applies. 12 empty chapter 13 world slip current and electrical strength under the working stealth degree 335 this state 14 transient overload voltage 1263335-this use
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.