JB/T 9162.20-1999 Table stem dimensions
Basic Information
Standard ID:
JB/T 9162.20-1999
Standard Name: Table stem dimensions
Chinese Name:
表杆 尺寸
Standard category:Machinery Industry Standard (JB)
state:in force
Date of Release1999-05-20
Date of Implementation:2000-01-01
standard classification number
Standard ICS number:Mechanical Manufacturing>>Machine Tools>>25.080.01 General Machine Tools
Standard Classification Number:Machinery>>Process Equipment>>J44 General Fixture
Publication information
other information
Focal point unit:Mechanical Science Research Institute
Introduction to standards:
JB/T 9162.20-1999 JB/T 9162.20-1999 Table stem dimensions JB/T9162.20-1999 Standard download decompression password: www.bzxz.net
Some standard content:
JCS 25.080.01
Machinery Industry Standard of the People's Republic of China
JB/T9162.1-9162.48--1999
Inspection fixture parts and components
The parts and units of inspection jig1999-05-20 Issued
State Machinery Industry Bureau
Implementation on 2000-01-01
Machinery Industry Standard of the People's Republic of China
Dial holding rud
|-DnenkonsbzxZ.net
This standard specifies the types and sizes of dial marks. To the style and size
The style and size are as follows: Type A
3 marking
Marking example:
Marking of Type A rod with diameter of 12mm and/=10mm: Morning rod A12×160JR/T9162.20—[999 National Machinery Industry Week 1999.05-20 approved 2
.IBT9162.20—1999
Agent check 7.8 J44001.20-87
2000-01-01 implementation
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.