Home > GB > GB 16487.9-1996 Imported Waste Environmental Protection Control Standard Waste Wires and Cables
GB 16487.9-1996 Imported Waste Environmental Protection Control Standard Waste Wires and Cables

Basic Information

Standard: GB 16487.9-1996

tandard name: Imported Waste Environmental Protection Control Standard Waste Wires and Cables

Standard category:National Standard (GB)

state:Abolished

release date:1996-07-29

Implementation date:1996-08-01

Expiration date:2006-02-01

standard classification number

Standard ICS number:Environmental Protection, Health and Safety>>13.030 Waste

Standard Classification Number:Environmental Protection>>Pollutant Emission Standards>>Z70 Toxic Solid Waste Control Standard

associated standards

alternative situation:Replaced by GB 16487.9-2005

Publication information

Publication date:1996-08-01

other information

Review date:2004-10-14

Drafting unit:National Environmental Protection Agency Pollution Control Division

Focal point unit:State Environmental Protection Administration

Publishing department:National Environmental Protection Agency

competent authority:State Environmental Protection Administration

Introduction to standards:

GB 16487.9-1996 Standard for Environmental Protection Control of Imported Waste Waste Wires and Cables GB16487.9-1996 Standard download and decompression password: www.bzxz.net

Some standard content:

GB16487.9—1996
Foreword
This standard is to implement the "Interim Regulations on Environmental Protection Management of Waste Imports" promulgated by the state and to control the harmful waste contained in imported waste wires and cables that can be used as raw materials. environmental pollution caused. This standard has been on trial basis since August 1, 1996. This standard was proposed by the Pollution Control Department of the State Environmental Protection Administration. The National Environmental Protection Administration is responsible for interpreting this standard. 1Scope
National Standard of the People's Republic of China
Environmental protection control standard for imported scrap
Waste wire and cable
(Trial)
Environmental protection control standard for imported scrap material | | tt | This standard applies to the import of waste wires and cables. 2 Reference Standards
SN0580-1996 Inspection Regulations for Imported Waste Wires and Cables (Trial) GB8703-88 Radiation Protection Regulations
SN0570-·1996 Inspection Regulations for Radioactive Contamination of Imported Scrap Metal (Trial) GB5085.3-1996 Hazardous Waste Identification Standard Leaching Toxicity Identification GB13015-91 Waste Pollution Control Standard Containing PCBs GB/T15555.1~15555.12-1995 Solid Waste Leaching Toxicity Determination Method 3 Definition
This standard adopts the following definitions: ||tt ||Entrained waste
refers to the waste materials that are mixed with imported waste wires and cables during the collection, packaging and transportation processes and cannot be directly used as raw materials (excluding packaging materials for imported waste wires and cables and those that need to be used during transportation) of other substances). 4 Control standards and requirements
4.1 It is prohibited to mix imported waste wires and cables with entrained waste whose concentration of harmful substances in the leachate exceeds the identification standard value in GB5085.3-1996.
4.2 It is prohibited to mix waste with polyfluorinated biphenyl content exceeding the control standard value in GB13015-91 in imported waste wires and cables. 4.3 Imported waste wires and cables are prohibited from being mixed with entrained waste whose leachate pH value is equal to or greater than 12.5 and equal to or less than 2. 4.4 It is prohibited to carry radioactive waste in imported waste wires and cables. 4.5 The radioactive material pollution control indicators of imported waste wires and cables should comply with the requirements of GB8703--88 regarding the control level of radioactive material pollution on the surface of objects.
4.6 The total weight of the following wastes contained in imported waste wires and cables shall not exceed one ten thousandth of the weight of imported waste wires and cables.--: Approved by the State Environmental Protection Administration on 1996-07-29 and implemented on 1996-08-01||tt ||a)
Explosive waste;
b) Asbestos waste;
c)
Chu burning disposal residue;
GB16487.9— 1996 | |e)
f)
g)
Various liquid waste;
Clinical waste;
Kitchen waste, bathroom waste;||tt| | Sealed containers, etc. bzxZ.net
h)
4.7 In addition to the wastes listed in the above items, other entrained wastes (such as waste paper, waste wood blocks, slag, etc.) The total weight of soil, waste fiber ropes, waste glass, cement blocks and stripped rust, etc.) shall not exceed 2% of the weight of imported waste wires and cables
4.8 Imported waste wires and cables shall not contain oil-sealed cables and optical cables. 5 Inspection
5.1 The inspections in Articles 4.1 and 4.3 of this standard shall be carried out in accordance with the provisions of GB/T15555.1~15555.12-1995. 5.2 The inspection in Article 4.2 of this standard shall be carried out in accordance with the provisions of GB13015-91. 5.3 The inspections in Articles 4.4 and 4.5 of this standard shall be carried out in accordance with the provisions of SN0570--1996. 5.4 The inspection of other provisions of this standard shall be carried out in accordance with the provisions of SN0580-1996.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.