GB/T 15049.9-1996 CAD standard parts graphic file geometry and characteristics specification gasket GB/T15049.9-1996 standard download decompression password: www.bzxz.net

CS_35-240.50
National Standard of the People's Republic of China
GB/T 15049. 3~15049.9—1996
CAD standard parts file-
Specification of geometry and parameters1996-10-23Released
National Technical Supervision Bureau
1997-05-01Implementation
t:B:T 15049.9—1996
This standard is based on the German standard DIXV4 (101.T: 15: 1988) and is formulated based on the specific conditions of our country's standards. Its technical content is equivalent to DINV2001.Tel15: 1988, and its numbering and method are equivalent to the N.15 standard.
Due to the differences in the classification of standard parts, standard numbering planning, the scope of each sub-standard, and the types, shapes and sizes of products of the same type of marked parts between the two countries, there are some major differences between the Chinese standard and D1N<001.Tel15: 1988 in some aspects:
) In the "post-processing product standard\competition, this Chinese standard The products that are handled by the standard are the national standards of some countries in China: so the three standards are different in terms of standard number, product type and effect. ) In the "characteristic name and characteristic table chapter, because the specific products handled by the standard have different shapes and effects, the geometric shapes and numbers of the two standards are different. ) In the "\ shape component" chapter, because the specific types and shapes of the products handled by the standard are different, the number, graphic arrangement and other characteristics of the graphics component (i.e. K component) of this standard are different from those of V001.eil1. The wood series standard will be formulated and published according to the plan of the national standardization department. This combined book contains the following seven parts || TT || 6109-1995C standard component graphics file several graphics new characteristics specification 4C0:.Teil 16:1987)
GT504S.41996CA standard parts drawing file and drawing and characteristic specification (eg1)N40C.Tei402:1999)
GB/T1M9.E-RCAD standard drawing file DannN
Multiple shapes and special specifications
4002.Teil 23.1989
3T1610-2AD elastic parts drawing file
Child driving shape support specification
40G, T-il 11.3967)
GB:T 15019.7:995
[AL) standard parts drawing file
Child paying shape bar characteristic pool
4CU1. Teil 12:1!SE)
G1(49.1996CA standard graphics file graphic characteristics standard drawing end bolt!EINV
nail(eq DIN V
G乃/T1i01.一CAD standard 4 graphics file J.付朱形利支持性魂标典enDIN
4c01.Teil 15,1588?
This standard is the work of China Standardization and Information Classification and Coding Research Institute. The originator of this standard is: China Information Classification and Coding Research Institute, the main drafters of the technical standard are: Ju Guangjin, Che Xiongmo, Fa Yan. The interpretation of this standard is entrusted to China Standardization and Information Classification and Coding Research Institute. National Standard of the People's Republic of China
CAD standard parts drawing files
Specification of geometry and characteristics
CAD siandard parts-CileSpecification of geometry and parametersWashers
GR/T15049.9—1595
This standard specifies the standard for the standard washers that constitute the GB/T15049.9—1595 standard graphic files: This standard is used to compile the special files related to the A-tool parts library and 2D graphics programs to ensure the standard description and standard graphic display of washers. This standard is applicable to computer design and product computer management, etc. This standard is not applicable to the manufacture and acceptance of this standard part. 2 Cited standards
The following standards contain clauses that become the provisions of this standard through the use of the underlined standard. When this standard is published, the service indicated is valid. All parties using this standard should carefully consider using the most recent version of the underlined standard. GB/10091.1—1955 Definition and principle of physical property table GB/T15049.1-S4C: General rules for preparation of AD standard parts graphic files 3 Product standards handled
GB-8E Flat display Class C
G96—61 Large display—A and C levels
GB97.185 Class A
BU7.—Flat angle type—Class A
GH848—8 Small apartment—Class A
GBHF1-ST
B5287-85 Special drawing Class 4 Characteristics
The characteristics specified in this standard shall be designated according to the principles of GBT10091.1 and GB/T15013.1. 4.1 Multiple names for grid characteristics
National Inspection and Technical Supervision Bureau 1996-10-23 approved 1aa
1997-05-01 implementation
storage blank Ningdai
4.2 Table of characteristics of grids
Performance level
Table processing
Production guarantee
Graphic rules
5.1 Pad mesh hardware
Wild name
GB/T 15049.9—1996
Table 1 Characteristic name
Characteristic word code
Counter-slotted socket vertical
Counter-slotted socket depth
Internal use
Equal property name
Non-comparative zero piece (standard nominal size)
Pad national standard and product size letter code and product mark and size code comparison support size small character generation ants (·Representative geometric size: H
KIA, B, C>
K3iA, D, C, AAC
K4LA.ECAAA.AAH.AACS
5.2 Property table
ID.NN,'GB 95—85
GA/T 15049 9 -1996
E.NT, Flat Pad West Class C
ID,NB,NE-\GH95—85—$CAA.—1001V.\ID.AD,1SB6.35.01
TD,VD.S4C5J4+1
ID.FA.1,tN oS8SsCeauo
JD,FD,2.1
GE,KT,KT-9K1\
GF,PA,DK1A
GE.SM.DAK1.GH_O009I,1
C F3.2CAA,12
VI.DA.A ,F4.: ,B I2
C Characteristic Description Item
MM,SM,1.1a,I,J,A
MM,SM.,20.1.1.H
MM.SM.30.1.1,C
MM,SM.:.40.1.0.H
MM.SM.J.50.1.0.J
（Persistent Effect Teacher
C AF INR
ZA,DA,1
DA.1.10,J.
，internal
，performance and so on after "
+spring surface treatment"
，with pregnant parts (exposed nominal size)
Note: "Characteristic effect data of the fourth line\ZA,DA,1 three items of pressure station, the number of the following element data should be checked when the effect, the rate of production and the number of professional military science, the test number is how much, this standard will only be the product of this line of teaching data for the sample, so the flow effect is the beginning. Next
IL.NN,'CB U$—$5
JDNT, large Zhi Figure A and C level
GB/T 15049.9--1996
,NH,NB=\pad net GB 96—R5—SCAA.$H. \D,AD,:985. 06. 01'
JD,D,45204.1
JD,FA.1,CK40CC0S8&000GG
ID.FI>,2.1
GE,PA.DSK)
GE.SM,D 9K:, GB100GSI'1
F4.1.B.I3,C
Description of transsexual cat
Numerical range
n,1.1.CAA||tt ||-F3. 1 +CAA,I2
, meat diameter"
" performance level slow
, surface treatment
, matching parts frequency ripple nominal size small>
FW .JH1.E14nHV,A140.I0CH
Characteristic data items
A,1.1n,1.
ID.NN,GR .1—B3
[,NT ，A
GB,T 15049. 9—1995
ID,NB,NB=*mat Gn 97. 1—85—$CAA. $H. rID,AD,'1986.C6.01
TD.VD.940904,1
WFA,,CN4000088880009
GF,KT,KI=\DSK?\||tt| |GE,PA,D9K:-A
GE,SM,D9K1.GB100C91+1
Heart characteristic description speed item
MM.SM.,I.||tt| |Heart value range
ZA,FW,1
=0,11,A
3a,1,1,c
6U,I:1+CAA| |tt||Outer diameter\
, performance grade"
, surface treatment
, matching parts (nominal inch of the texture)
FW.1.H. 1.14011VrA14W.100HV
C Characteristic number offset
E INR FA A
DA.I.IG.:
ID,NN,GB848—B5||tt ||TD,NT,Small washer-A wrinkle
ID,NB,NB=\pad picture GR 848—25—$CAA.—$H.^ID,AD,1986.06.01
1D.YD.94a90.1
JD.FA.1,CN400005828030000
GE, KT,KT-\TQK1\
GE.IA.D9KI.A
GE,SM.ESKI,G31GCUI+1
VI,DA,A
Holding compensation According to the above items
MM..SM.1.
MM,SM,1,
C numerical range
50.1,1,CAA
CB/I 15049.9 --1996
"Inner diameter"
, Outer diameter\
"Performance grade
, Surface treatment
, CAA, F1.1||tt ||"Relevant parts (nominal thread size") FW.1.H.-1,-140HV+A140',1CUH]C
Heart special data item
TDNR FA A|| tt||ZA,DA:]
3.5,0.3.1.5
ID.NN,'GR =287—BJ'
ID,NT: Extra large gasket C grade|| tt||ID,NB,'NE* potential diagramGH 5287—85—$CAA.—100HV\IT3,AD,U55. 06. UI
T,V.S4c904.1
D.EA.1,CN4000068E8920000
ID,F,2. 1
GF.KT,'RT- T9K1
GEPA.D9KIA
GE.SM.D0K1CB1000$1.1
VI,DA.A.FI,1,
C Sustainability options
C .Conservative data items
60,1.1.CAA
DA.1,10R.
GB/ 15049.9—1955
.CAA.I2
, sex grade
surface treatment
, matching cattle (small hatching mark nominal size)
5.5, 182,5
ID.NN,GB U7-2—H5
TT,VT, Flat washer legend angle type first level
ID.NR.NB=\base GB97.2 .-95$CAA.—$IT.\JI).A,1S86.05. 01
ID,VT.64R94.1
JD.FA1.CN(000SSHS0000
11).F.2.1
GE.KT.KT=*DUK2n| |tt||GE,PA,DAK2,A
GE,SM.DSK2GB1CI,
VI.DA,AF4.1,BJ2
C Characteristic Maintenance Speed ​​Item||tt| |ZA,MM,G
MM.SM.1,40,1.lH
CValue range
60,1,1.C4A
, inner diameter| |tt||, external adjustment
R/T 15049.9—1996
, performance and other spots
, surface treatment ring!
, matching parts (nominal thread size ten)
FW.-.H..1 -0HVA1O.ICSHV]
C characteristic effect disturbance item
CAFIDNR
ID.NN,GS 851-88
T.NT, opening potential diagram||tt| |.NB,JEiEAA.EQ.\A\NB=\垫GB851SESCAA.Per
ID,NB,IF(FAA.EQ.\B\INB=\热圈GB 85I-88-BSCAA.—SB.\TT.AT,1989.01.21
ID,VD.9.0G01.1
I5,FA.1,CN4CC53888800CC35
11,F [,2.1| |tt||GE.KT.\I(EAA.EO.\A\KT=DK3\GE,KT,IF(EAA.EQ.\B\KT-\D9N4\GE.PA,D9K3.A||tt ||GE.PA.D9K4-A
GE,SM. D9K3GB10S1,1
CE.SM,DK4,CB10ST'1
,AAA,AAR,AAC:
VI.DA.A.12.H.JS.C.12. AAA.J2.AAB,F3.1.AAC.F3.I.CAA,13.2
Heart characteristic capture item
ZA,MM,10
30.1.1.t.
60,-.1.AAA
7C,1.1,4AB
MM.GM,1. &.1.1.AAC
CValue range
SO,I,I,CAA
1,1.3,EAA
FW,2.EAA,A'A' ,B',B
C. Characteristic number item
IDNR FAA
DA.1.1C.:,
GB/T 75049. 9—1996
and width
, outer diameter
, thickness
"performance level"
, surface
, anti-head hollow Self-prepared
, countersunk seat depth
, reverse dimension
matching seasonal parts (nominal thread size"
, type
AABAACCAA|| tt||13..6,.5,5
H\mm\,2
't*mm'z
,mm',z1
GE,PA.DSK)
GE.SM,D9K:,GB100GSI'1
F4.1.B.I3,C
Transformation description
Numerical range
n,1.1.CAA
-F3. 1 +CAA,I2
，meat diameter"
"performance level
，surface treatment
，matching parts frequency ripple nominal size small>
FW.JH1.E14nHV,A140.I0CH
Characteristic data items
A,1.1n,1.
ID.NN,GR .1—B3
[,NT，A
GB,T 15049. 9—1995
ID,NB,NB=*Pad Gn 97. 1—85—$CAA. $H. rID,AD,'1986.C6.01
TD.VD.940904,1
WFA,,CN4000088880009
GF,KT,KI=\DSK?\
GE,PA,D9K:-A
GE,SM,D9K1.GB100C91+1
Central characteristic description speed item
MM.SM.,I.||tt| |Center value range
ZA,FW,1
=0,11,A
3a,1,1,c
6U,I:1+CAA
Outer diameter\
，Performance grade"
，Surface treatment
，Matching parts (nominal inch of photographic grain)
FW.1.H.1.14011VrA14W.100HV
CCharacteristic number offset
E INR FA A
DA.I.IG.:
ID,NN,GB848—B5
TD,NT,Small washer-A wrinkle
ID,NB,NB=\Pad drawing GR 848—25—$CAA.—$H.^ID,AD,1986.06.01
1D.YD.94a90.1
JD.FA.1,CN400005828030000
GE,KT,KT-\TQK1\
GE.IA.D9KI.A
GE,SM.ESKI,G31GCUI+1
VI,DA,A
Statement of claim
MM..SM.1.
MM,SM,1,
C numerical range
50.1,1,CAA
CB/I 15049.9 --1996
"Inner diameter"
, outer diameter\
"Performance level
, surface treatment
, CAA, F1.1
"Comparative parts (nominal thread size") FW.1.H.-1,-140HV+A140',1CUH]C
Heart special data item
TDNR FA A
ZA,DA:]
3.5,0.3.1.5
ID.NN,'GR =287—BJ'
ID,NT: Extra large gasket C grade
ID,NB,'NE* potential diagram GH 5287—85—$CAA.—100HV\IT3,AD,U55. 06. UI
T,V.S4c904.1
D.EA.1,CN4000068E8920000
ID,F,2. 1
GF.KT,'RT- T9K1
GEPA.D9KIA
GE.SM.D0K1CB1000$1.1
VI,DA.A.FI,1,
C Persistent Options
C. Conservative Data Items
60,1.1.CAA
DA.1,10R.
GB/ 15049.9—1955
.CAA.I2
, sales grade
surface treatment
, matching cattle (hatching nominal size)
5.5,182,5
ID.NN,GB U7-2—H5
TT,VT, flat pad legend angle type first level
ID.NR.NB=\垒GB97.2.-95$CAA.—$IT.\JI).A,1S86.05. 01
ID,VT.64R94.1
JD.FA1.CN(000SSHS0000
11).F.2.1
GE.KT.KT=*DUK2n
GE,PA,DAK2,A
GE,SM.DSK2GB1CI,
VI.DA,AF4.1,BJ2
CCharacteristic maintenance item
ZA,MM,G
MM.SM.1,40,1.lH
CValue range
60,1,1.C4A
，Inner diameter
，External roundness
R/T 15049.9—1996
, performance and other spots?
, surface treatment ring!
, matching parts (nominal thread size +)
FW.-.H..1-0HVA1O.ICSHV]
C characteristic effect interference item
CAFIDNR
ID.NN,GS 851-88
T.NT, opening potential diagram
.NB,JEiEAA.EQ.\A\NB=\pad GB851SESCAA.Per
ID,NB,IF(FAA.EQ.\B\INB=\hot circle GB 85I-88-BSCAA.—SB.\TT.AT,1989.01.21
ID,VD.9.0G01.1
I5,FA.1,CN4CC53888800CC35
11,F[,2.1| |tt||GE.KT.\I(EAA.EO.\A\KT=DK3\GE,KT,IF(EAA.EQ.\B\KT-\D9N4\GE.PA,D9K3.A
GE.PA.D9K4-A
GE,SM. D9K3GB10S1,1
CE.SM,DK4,CB10ST'1
,AAA,AAR,AAC:
VI.DA.A.12.H.JS.C.12.AAA.J2.AAB,F3.1.AAC.F3.I.CAA,13.2
Heart characteristic capture item
ZA,MM,10
30.1.1.t.
60,-.1.AAA
7C,1.1,4AB
MM.GM,1. &.1.1.AAC
C Numerical range
SO,I,I,CAA
1,1.3,EAA
FW,2.EAA,A'A',B',B
C. Characteristic number
IDNR FAA
DA.1.1C.:,
GB/T 75049. 9—1996
and width
, outer diameter
, thickness
"performance level"
, surface
, anti-head virtual preparation
, countersunk seat depth
, reverse size
matching seasonal parts (thread nominal size small"
, type
AABAACCAA
13..6,.5,5
H\mm\,2
't*mm'z
,mm',z1
GE,PA.DSK)
GE.SM,D9K:,GB100GSI'1
F4.1.B.I3,C
Transformation description
Numerical range
n,1.1.CAA
-F3. 1 +CAA,I2
，meat diameter"
"performance level
，surface treatment
，matching parts frequency ripple nominal size small>
FW.JH1.E14nHV,A140.I0CH
Characteristic data items
A,1.1n,1.
ID.NN,GR .1—B3
[,NT，A
GB,T 15049. 9—1995
ID,NB,NB=*Pad Gn 97. 1—85—$CAA. $H. rID,AD,'1986.C6.01
TD.VD.940904,1
WFA,,CN4000088880009
GF,KT,KI=\DSK?\
GE,PA,D9K:-A
GE,SM,D9K1.GB100C91+1
Central characteristic description speed item
MM.SM.,I.||tt| |Center value range
ZA,FW,1
=0,11,A
3a,1,1,c
6U,I:1+CAA
Outer diameter\
，Performance grade"
，Surface treatment
，Matching parts (nominal inch of photographic grain)
FW.1.H.1.14011VrA14W.100HV
CCharacteristic number offset
E INR FA A
DA.I.IG.:
ID,NN,GB848—B5
TD,NT,Small washer-A wrinkle
ID,NB,NB=\Pad drawing GR 848—25—$CAA.—$H.^ID,AD,1986.06.01
1D.YD.94a90.1
JD.FA.1,CN400005828030000
GE,KT,KT-\TQK1\
GE.IA.D9KI.A
GE,SM.ESKI,G31GCUI+1
VI,DA,A
Statement of claim
MM..SM.1.
MM,SM,1,
C numerical range
50.1,1,CAA
CB/I 15049.9 --1996
"Inner diameter"
, outer diameter\
"Performance level
, surface treatment
, CAA, F1.1
"Comparative parts (nominal thread size") FW.1.H.-1,-140HV+A140',1CUH]C
Heart special data item
TDNR FA A
ZA,DA:]
3.5,0.3.1.5
ID.NN,'GR =287—BJ'
ID,NT: Extra large gasket C grade
ID,NB,'NE* potential diagram GH 5287—85—$CAA.—100HV\IT3,AD,U55. 06. UI
T,V.S4c904.1
D.EA.1,CN4000068E8920000
ID,F,2. 1
GF.KT,'RT- T9K1
GEPA.D9KIA
GE.SM.D0K1CB1000$1.1
VI,DA.A.FI,1,
C Persistent Options
C. Conservative Data Items
60,1.1.CAA
DA.1,10R.
GB/ 15049.9—1955
.CAA.I2
, sales grade
surface treatment
, matching cattle (hatching nominal size)
5.5,182,5
ID.NN,GB U7-2—H5
TT,VT, flat pad legend angle type first level
ID.NR.NB=\垒GB97.2.-95$CAA.—$IT.\JI).A,1S86.05. 01
ID,VT.64R94.1
JD.FA1.CN(000SSHS0000
11).F.2.1
GE.KT.KT=*DUK2n
GE,PA,DAK2,A
GE,SM.DSK2GB1CI,
VI.DA,AF4.1,BJ2
CCharacteristic maintenance item
ZA,MM,G
MM.SM.1,40,1.lH
CValue range
60,1,1.C4A
，Inner diameter
，External roundness
R/T 15049.9—1996
, performance and other spots?
, surface treatment ring!
, matching parts (nominal thread size +)
FW.-.H..1-0HVA1O.ICSHV]
C characteristic effect interference item
CAFIDNR
ID.NN,GS 851-88
T.NT, opening potential diagram
.NB,JEiEAA.EQ.\A\NB=\pad GB851SESCAA.Per
ID,NB,IF(FAA.EQ.\B\INB=\hot circle GB 85I-88-BSCAA.—SB.\TT.AT,1989.01.21www.bzxz.net
ID,VD.9.0G01.1
I5,FA.1,CN4CC53888800CC35
11,F[,2.1| |tt||GE.KT.\I(EAA.EO.\A\KT=DK3\GE,KT,IF(EAA.EQ.\B\KT-\D9N4\GE.PA,D9K3.A
GE.PA.D9K4-A
GE,SM. D9K3GB10S1,1
CE.SM,DK4,CB10ST'1
,AAA,AAR,AAC:
VI.DA.A.12.H.JS.C.12.AAA.J2.AAB,F3.1.AAC.F3.I.CAA,13.2
Heart characteristic capture item
ZA,MM,10
30.1.1.t.
60,-.1.AAA
7C,1.1,4AB
MM.GM,1. &.1.1.AAC
C Numerical range
SO,I,I,CAA
1,1.3,EAA
FW,2.EAA,A'A',B',B
C. Characteristic number
IDNR FAA
DA.1.1C.:,
GB/T 75049. 9—1996
and width
, outer diameter
, thickness
"performance level"
, surface
, anti-head virtual preparation
, countersunk seat depth
, reverse size
matching seasonal parts (thread nominal size small"
, type
AABAACCAA
13..6,.5,5
H\mm\,2
't*mm'z
,mm',zCAA
-F3. 1 +CAA,I2
, meat diameter"
" performance level
, surface treatment
, matching parts frequency ripple nominal size small>
FW.JH1.E14nHV,A140.I0CH
characteristic data items
A,1.1n,1.
ID.NN,GR .1—B3
[,NT，A
GB,T 15049. 9—1995
ID,NB,NB=*mat diagramGn 97. 1—85—$CAA. $H. rID,AD,'1986.C6.01
TD.VD.940904,1
WFA,,CN4000088880009
GF,KT,KI=\DSK?\
GE,PA,D9K:-A
GE,SM,D9K1.GB100C91+1
Heart characteristic description speed item
MM.SM.,I.||tt| |Center value range
ZA,FW,1
=0,11,A
3a,1,1,c
6U,I:1+CAA
Outer diameter\
，Performance grade"
，Surface treatment
，Matching parts (nominal inch of photographic grain)
FW.1.H.1.14011VrA14W.100HV
CCharacteristic number offset
E INR FA A
DA.I.IG.:
ID,NN,GB848—B5
TD,NT,Small washer-A wrinkle
ID,NB,NB=\Pad drawing GR 848—25—$CAA.—$H.^ID,AD,1986.06.01
1D.YD.94a90.1
JD.FA.1,CN400005828030000
GE,KT,KT-\TQK1\
GE.IA.D9KI.A
GE,SM.ESKI,G31GCUI+1
VI,DA,A
Statement of claim
MM..SM.1.
MM,SM,1,
C numerical range
50.1,1,CAA
CB/I 15049.9 --1996
"Inner diameter"
, outer diameter\
"Performance level
, surface treatment
, CAA, F1.1
"Comparative parts (nominal thread size") FW.1.H.-1,-140HV+A140',1CUH]C
Heart special data item
TDNR FA A
ZA,DA:]
3.5,0.3.1.5
ID.NN,'GR =287—BJ'
ID,NT: Extra large gasket C grade
ID,NB,'NE* potential diagram GH 5287—85—$CAA.—100HV\IT3,AD,U55. 06. UI
T,V.S4c904.1
D.EA.1,CN4000068E8920000
ID,F,2. 1
GF.KT,'RT- T9K1
GEPA.D9KIA
GE.SM.D0K1CB1000$1.1
VI,DA.A.FI,1,
C Persistent Options
C. Conservative Data Items
60,1.1.CAA
DA.1,10R.
GB/ 15049.9—1955
.CAA.I2
, sales grade
surface treatment
, matching cattle (hatching nominal size)
5.5,182,5
ID.NN,GB U7-2—H5
TT,VT, flat pad legend angle type first level
ID.NR.NB=\垒GB97.2.-95$CAA.—$IT.\JI).A,1S86.05. 01
ID,VT.64R94.1
JD.FA1.CN(000SSHS0000
11).F.2.1
GE.KT.KT=*DUK2n
GE,PA,DAK2,A
GE,SM.DSK2GB1CI,
VI.DA,AF4.1,BJ2
CCharacteristic maintenance item
ZA,MM,G
MM.SM.1,40,1.lH
CValue range
60,1,1.C4A
，Inner diameter
，External roundness
R/T 15049.9—1996
, performance and other spots?
, surface treatment ring!
, matching parts (nominal thread size +)
FW.-.H..1-0HVA1O.ICSHV]
C characteristic effect interference item
CAFIDNR
ID.NN,GS 851-88
T.NT, opening potential diagram
.NB,JEiEAA.EQ.\A\NB=\pad GB851SESCAA.Per
ID,NB,IF(FAA.EQ.\B\INB=\hot circle GB 85I-88-BSCAA.—SB.\TT.AT,1989.01.21
ID,VD.9.0G01.1
I5,FA.1,CN4CC53888800CC35
11,F[,2.1| |tt||GE.KT.\I(EAA.EO.\A\KT=DK3\GE,KT,IF(EAA.EQ.\B\KT-\D9N4\GE.PA,D9K3.A
GE.PA.D9K4-A
GE,SM. D9K3GB10S1,1
CE.SM,DK4,CB10ST'1
,AAA,AAR,AAC:
VI.DA.A.12.H.JS.C.12.AAA.J2.AAB,F3.1.AAC.F3.I.CAA,13.2
Heart characteristic capture item
ZA,MM,10
30.1.1.t.
60,-.1.AAA
7C,1.1,4AB
MM.GM,1. &.1.1.AAC
C Numerical range
SO,I,I,CAA
1,1.3,EAA
FW,2.EAA,A'A',B',B
C. Characteristic number
IDNR FAA
DA.1.1C.:,
GB/T 75049. 9—1996
and width
, outer diameter
, thickness
"performance level"
, surface
, anti-head virtual preparation
, countersunk seat depth
, reverse size
matching seasonal parts (thread nominal size small"
, type
AABAACCAA
13..6,.5,5
H\mm\,2
't*mm'z
,mm',zCAA
-F3. 1 +CAA,I2
, meat diameter"
" performance level
, surface treatment
, matching parts frequency ripple nominal size small>
FW.JH1.E14nHV,A140.I0CH
characteristic data items
A,1.1n,1.
ID.NN,GR .1—B3
[,NT，A
GB,T 15049. 9—1995
ID,NB,NB=*mat diagramGn 97. 1—85—$CAA. $H. rID,AD,'1986.C6.01
TD.VD.940904,1
WFA,,CN4000088880009
GF,KT,KI=\DSK?\
GE,PA,D9K:-A
GE,SM,D9K1.GB100C91+1
Heart characteristic description speed item
MM.SM.,I.||tt| |Center value range
ZA,FW,1
=0,11,A
3a,1,1,c
6U,I:1+CAA
Outer diameter\
，Performance grade"
，Surface treatment
，Matching parts (nominal inch of photographic grain)
FW.1.H.1.14011VrA14W.100HV
CCharacteristic number offset
E INR FA A
DA.I.IG.:
ID,NN,GB848—B5
TD,NT,Small washer-A wrinkle
ID,NB,NB=\Pad drawing GR 848—25—$CAA.—$H.^ID,AD,1986.06.01
1D.YD.94a90.1
JD.FA.1,CN400005828030000
GE,KT,KT-\TQK1\
GE.IA.D9KI.A
GE,SM.ESKI,G31GCUI+1
VI,DA,A
Statement of claim
MM..SM.1.
MM,SM,1,
C numerical range
50.1,1,CAA
CB/I 15049.9 --1996
"Inner diameter"
, outer diameter\
"Performance level
, surface treatment
, CAA, F1.1
"Comparative parts (nominal thread size") FW.1.H.-1,-140HV+A140',1CUH]C
Heart special data item
TDNR FA A
ZA,DA:]
3.5,0.3.1.5
ID.NN,'GR =287—BJ'
ID,NT: Extra large gasket C grade
ID,NB,'NE* potential diagram GH 5287—85—$CAA.—100HV\IT3,AD,U55. 06. UI
T,V.S4c904.1
D.EA.1,CN4000068E8920000
ID,F,2. 1
GF.KT,'RT- T9K1
GEPA.D9KIA
GE.SM.D0K1CB1000$1.1
VI,DA.A.FI,1,
C Persistent Options
C. Conservative Data Items
60,1.1.CAA
DA.1,10R.
GB/ 15049.9—1955
.CAA.I2
, sales grade
surface treatment
, matching cattle (hatching nominal size)
5.5,182,5
ID.NN,GB U7-2—H5
TT,VT, flat pad legend angle type first level
ID.NR.NB=\垒GB97.2.-95$CAA.—$IT.\JI).A,1S86.05. 01
ID,VT.64R94.1
JD.FA1.CN(000SSHS0000
11).F.2.1
GE.KT.KT=*DUK2n
GE,PA,DAK2,A
GE,SM.DSK2GB1CI,
VI.DA,AF4.1,BJ2
CCharacteristic maintenance item
ZA,MM,G
MM.SM.1,40,1.lH
CValue range
60,1,1.C4A
，Inner diameter
，External roundness
R/T 15049.9—1996
, performance and other spots?
, surface treatment ring!
, matching parts (nominal thread size +)
FW.-.H..1-0HVA1O.ICSHV]
C characteristic effect interference item
CAFIDNR
ID.NN,GS 851-88
T.NT, opening potential diagram
.NB,JEiEAA.EQ.\A\NB=\pad GB851SESCAA.Per
ID,NB,IF(FAA.EQ.\B\INB=\hot circle GB 85I-88-BSCAA.—SB.\TT.AT,1989.01.21
ID,VD.9.0G01.1
I5,FA.1,CN4CC53888800CC35
11,F[,2.1| |tt||GE.KT.\I(EAA.EO.\A\KT=DK3\GE,KT,IF(EAA.EQ.\B\KT-\D9N4\GE.PA,D9K3.A
GE.PA.D9K4-A
GE,SM. D9K3GB10S1,1
CE.SM,DK4,CB10ST'1
,AAA,AAR,AAC:
VI.DA.A.12.H.JS.C.12.AAA.J2.AAB,F3.1.AAC.F3.I.CAA,13.2
Heart characteristic capture item
ZA,MM,10
30.1.1.t.
60,-.1.AAA
7C,1.1,4AB
MM.GM,1. &.1.1.AAC
C Numerical range
SO,I,I,CAA
1,1.3,EAA
FW,2.EAA,A'A',B',B
C. Characteristic number
IDNR FAA
DA.1.1C.:,
GB/T 75049. 9—1996
and width
, outer diameter
, thickness
"performance level"
, surface
, anti-head virtual preparation
, countersunk seat depth
, reverse size
matching seasonal parts (thread nominal size small"
, type
AABAACCAA
13..6,.5,5
H\mm\,2
't*mm'z
,mm',zNB=*Pad Gn 97. 1—85—$CAA. $H. rID,AD,'1986.C6.01
TD.VD.940904,1
WFA,,CN4000088880009
GF,KT,KI=\DSK?\
GE,PA,D9K:-A
GE,SM,D9K1.GB100C91+1
Central characteristic description speed item
MM.SM.,I.||tt| |Center value range
ZA,FW,1
=0,11,A
3a,1,1,c
6U,I:1+CAA
Outer diameter\
，Performance grade"
，Surface treatment
，Matching parts (nominal inch of photographic grain)
FW.1.H.1.14011VrA14W.100HV
CCharacteristic number offset
E INR FA A
DA.I.IG.:
ID,NN,GB848—B5
TD,NT,Small washer-A wrinkle
ID,NB,NB=\Pad drawing GR 848—25—$CAA.—$H.^ID,AD,1986.06.01
1D.YD.94a90.1
JD.FA.1,CN400005828030000
GE,KT,KT-\TQK1\
GE.IA.D9KI.A
GE,SM.ESKI,G31GCUI+1
VI,DA,A
Statement of claim
MM..SM.1.
MM,SM,1,
C numerical range
50.1,1,CAA
CB/I 15049.9 --1996
"Inner diameter"
, outer diameter\
"Performance level
, surface treatment
, CAA, F1.1
"Comparative parts (nominal thread size") FW.1.H.-1,-140HV+A140',1CUH]C
Heart special data item
TDNR FA A
ZA,DA:]
3.5,0.3.1.5
ID.NN,'GR =287—BJ'
ID,NT: Extra large gasket C grade
ID,NB,'NE* potential diagram GH 5287—85—$CAA.—100HV\IT3,AD,U55. 06. UI
T,V.S4c904.1
D.EA.1,CN4000068E8920000
ID,F,2. 1
GF.KT,'RT- T9K1
GEPA.D9KIA
GE.SM.D0K1CB1000$1.1
VI,DA.A.FI,1,
C Persistent Options
C. Conservative Data Items
60,1.1.CAA
DA.1,10R.
GB/ 15049.9—1955
.CAA.I2
, sales grade
surface treatment
, matching cattle (hatching nominal size)
5.5,182,5
ID.NN,GB U7-2—H5
TT,VT, flat pad legend angle type first level
ID.NR.NB=\垒GB97.2.-95$CAA.—$IT.\JI).A,1S86.05. 01
ID,VT.64R94.1
JD.FA1.CN(000SSHS0000
11).F.2.1
GE.KT.KT=*DUK2n
GE,PA,DAK2,A
GE,SM.DSK2GB1CI,
VI.DA,AF4.1,BJ2
CCharacteristic maintenance item
ZA,MM,G
MM.SM.1,40,1.lH
CValue range
60,1,1.C4A
，Inner diameter
，External roundness
R/T 15049.9—1996
, performance and other spots?
, surface treatment ring!
, matching parts (nominal thread size +)
FW.-.H..1-0HVA1O.ICSHV]
C characteristic effect interference item
CAFIDNR
ID.NN,GS 851-88
T.NT, opening potential diagram
.NB,JEiEAA.EQ.\A\NB=\pad GB851SESCAA.Per
ID,NB,IF(FAA.EQ.\B\INB=\hot circle GB 85I-88-BSCAA.—SB.\TT.AT,1989.01.21
ID,VD.9.0G01.1
I5,FA.1,CN4CC53888800CC35
11,F[,2.1| |tt||GE.KT.\I(EAA.EO.\A\KT=DK3\GE,KT,IF(EAA.EQ.\B\KT-\D9N4\GE.PA,D9K3.A
GE.PA.D9K4-A
GE,SM. D9K3GB10S1,1
CE.SM,DK4,CB10ST'1
,AAA,AAR,AAC:
VI.DA.A.12.H.JS.C.12.AAA.J2.AAB,F3.1.AAC.F3.I.CAA,13.2
Heart characteristic capture item
ZA,MM,10
30.1.1.t.
60,-.1.AAA
7C,1.1,4AB
MM.GM,1. &.1.1.AAC
C Numerical range
SO,I,I,CAA
1,1.3,EAA
FW,2.EAA,A'A',B',B
C. Characteristic number
IDNR FAA
DA.1.1C.:,
GB/T 75049. 9—1996
and width
, outer diameter
, thickness
"performance level"
, surface
, anti-head virtual preparation
, countersunk seat depth
, reverse size
matching seasonal parts (thread nominal size small"
, type
AABAACCAA
13..6,.5,5
H\mm\,2
't*mm'z
,mm',zNB=*Pad Gn 97. 1—85—$CAA. $H. rID,AD,'1986.C6.01
TD.VD.940904,1
WFA,,CN4000088880009
GF,KT,KI=\DSK?\
GE,PA,D9K:-A
GE,SM,D9K1.GB100C91+1
Central characteristic description speed item
MM.SM.,I.||tt| |Center value range
ZA,FW,1
=0,11,A
3a,1,1,c
6U,I:1+CAA
Outer diameter\
，Performance grade"
，Surface treatment
，Matching parts (nominal inch of photographic grain)
FW.1.H.1.14011VrA14W.100HV
CCharacteristic number offset
E INR FA A
DA.I.IG.:
ID,NN,GB848—B5
TD,NT,Small washer-A wrinkle
ID,NB,NB=\Pad drawing GR 848—25—$CAA.—$H.^ID,AD,1986.06.01
1D.YD.94a90.1
JD.FA.1,CN400005828030000
GE,KT,KT-\TQK1\
GE.IA.D9KI.A
GE,SM.ESKI,G31GCUI+1
VI,DA,A
Statement of claim
MM..SM.1.
MM,SM,1,
C numerical range
50.1,1,CAA
CB/I 15049.9 --1996
"Inner diameter"
, outer diameter\
"Performance level
, surface treatment
, CAA, F1.1
"Comparative parts (nominal thread size") FW.1.H.-1,-140HV+A140',1CUH]C
Heart special data item
TDNR FA A
ZA,DA:]
3.5,0.3.1.5
ID.NN,'GR =287—BJ'
ID,NT: Extra large gasket C grade
ID,NB,'NE* potential diagram GH 5287—85—$CAA.—100HV\IT3,AD,U55. 06. UI
T,V.S4c904.1
D.EA.1,CN4000068E8920000
ID,F,2. 1
GF.KT,'RT- T9K1
GEPA.D9KIA
GE.SM.D0K1CB1000$1.1
VI,DA.A.FI,1,
C Persistent Options
C. Conservative Data Items
60,1.1.CAA
DA.1,10R.
GB/ 15049.9—1955
.CAA.I2
, sales grade
surface treatment
, matching cattle (hatching nominal size)
5.5,182,5
ID.NN,GB U7-2—H5
TT,VT, flat pad legend angle type first level
ID.NR.NB=\垒GB97.2.-95$CAA.—$IT.\JI).A,1S86.05. 01
ID,VT.64R94.1
JD.FA1.CN(000SSHS0000
11).F.2.1
GE.KT.KT=*DUK2n
GE,PA,DAK2,A
GE,SM.DSK2GB1CI,
VI.DA,AF4.1,BJ2
CCharacteristic maintenance item
ZA,MM,G
MM.SM.1,40,1.lH
CValue range
60,1,1.C4A
，Inner diameter
，External roundness
R/T 15049.9—1996
, performance and other spots?
, surface treatment ring!
, matching parts (nominal thread size +)
FW.-.H..1-0HVA1O.ICSHV]
C characteristic effect interference item
CAFIDNR
ID.NN,GS 851-88
T.NT, opening potential diagram
.NB,JEiEAA.EQ.\A\NB=\pad GB851SESCAA.Per
ID,NB,IF(FAA.EQ.\B\INB=\hot circle GB 85I-88-BSCAA.—SB.\TT.AT,1989.01.21
ID,VD.9.0G01.1
I5,FA.1,CN4CC53888800CC35
11,F[,2.1| |tt||GE.KT.\I(EAA.EO.\A\KT=DK3\GE,KT,IF(EAA.EQ.\B\KT-\D9N4\GE.PA,D9K3.A
GE.PA.D9K4-A
GE,SM. D9K3GB10S1,1
CE.SM,DK4,CB10ST'1
,AAA,AAR,AAC:
VI.DA.A.12.H.JS.C.12.AAA.J2.AAB,F3.1.AAC.F3.I.CAA,13.2
Heart characteristic capture item
ZA,MM,10
30.1.1.t.
60,-.1.AAA
7C,1.1,4AB
MM.GM,1. &.1.1.AAC
C Numerical range
SO,I,I,CAA
1,1.3,EAA
FW,2.EAA,A'A',B',B
C. Characteristic number
IDNR FAA
DA.1.1C.:,
GB/T 75049. 9—1996
and width
, outer diameter
, thickness
"performance level"
, surface
, anti-head virtual preparation
, countersunk seat depth
, reverse size
matching seasonal parts (thread nominal size small"
, type
AABAACCAA
13..6,.5,5
H\mm\,2
't*mm'z
,mm',zGB848—B5
TD,NT,Small washer-A wrinkle
ID,NB,NB=\Pad diagram GR 848—25—$CAA.—$H.^ID,AD,1986.06.01
1D.YD.94a90.1
JD.FA.1,CN400005828030000
GE,KT,KT-\TQK1\
GE.IA.D9KI.A
GE,SM.ESKI,G31GCUI+1
VI,DA,A
Statement of claim
MM..SM.1.
MM,SM,1,
C numerical range
50.1,1,CAA
CB/I 15049.9 --1996
"Inner diameter"
, outer diameter\
"Performance level
, surface treatment
, CAA, F1.1
"Comparative parts (nominal thread size") FW.1.H.-1,-140HV+A140',1CUH]C
Heart special data item
TDNR FA A
ZA,DA:]
3.5,0.3.1.5
ID.NN,'GR =287—BJ'
ID,NT: Extra large gasket C grade
ID,NB,'NE* potential diagram GH 5287—85—$CAA.—100HV\IT3,AD,U55. 06. UI
T,V.S4c904.1
D.EA.1,CN4000068E8920000
ID,F,2. 1
GF.KT,'RT- T9K1
GEPA.D9KIA
GE.SM.D0K1CB1000$1.1
VI,DA.A.FI,1,
C Persistent Options
C. Conservative Data Items
60,1.1.CAA
DA.1,10R.
GB/ 15049.9—1955
.CAA.I2
, sales grade
surface treatment
, matching cattle (hatching nominal size)
5.5,182,5
ID.NN,GB U7-2—H5
TT,VT, flat pad legend angle type first level
ID.NR.NB=\垒GB97.2.-95$CAA.—$IT.\JI).A,1S86.05. 01
ID,VT.64R94.1
JD.FA1.CN(000SSHS0000
11).F.2.1
GE.KT.KT=*DUK2n
GE,PA,DAK2,A
GE,SM.DSK2GB1CI,
VI.DA,AF4.1,BJ2
CCharacteristic maintenance item
ZA,MM,G
MM.SM.1,40,1.lH
CValue range
60,1,1.C4A
，Inner diameter
，External roundness
R/T 15049.9—1996
, performance and other spots?
, surface treatment ring!
, matching parts (nominal thread size +)
FW.-.H..1-0HVA1O.ICSHV]
C characteristic effect interference item
CAFIDNR
ID.NN,GS 851-88
T.NT, opening potential diagram
.NB,JEiEAA.EQ.\A\NB=\pad GB851SESCAA.Per
ID,NB,IF(FAA.EQ.\B\INB=\hot circle GB 85I-88-BSCAA.—SB.\TT.AT,1989.01.21
ID,VD.9.0G01.1
I5,FA.1,CN4CC53888800CC35
11,F[,2.1| |tt||GE.KT.\I(EAA.EO.\A\KT=DK3\GE,KT,IF(EAA.EQ.\B\KT-\D9N4\GE.PA,D9K3.A
GE.PA.D9K4-A
GE,SM. D9K3GB10S1,1
CE.SM,DK4,CB10ST'1
,AAA,AAR,AAC:
VI.DA.A.12.H.JS.C.12.AAA.J2.AAB,F3.1.AAC.F3.I.CAA,13.2
Heart characteristic capture item
ZA,MM,10
30.1.1.t.
60,-.1.AAA
7C,1.1,4AB
MM.GM,1. &.1.1.AAC
C Numerical range
SO,I,I,CAA
1,1.3,EAA
FW,2.EAA,A'A',B',B
C. Characteristic number
IDNR FAA
DA.1.1C.:,
GB/T 75049. 9—1996
and width
, outer diameter
, thickness
"performance level"
, surface
, anti-head virtual preparation
, countersunk seat depth
, reverse size
matching seasonal parts (thread nominal size small"
, type
AABAACCAA
13..6,.5,5
H\mm\,2
't*mm'z
,mm',zGB848—B5
TD,NT,Small washer-A wrinkle
ID,NB,NB=\Pad diagram GR 848—25—$CAA.—$H.^ID,AD,1986.06.01
1D.YD.94a90.1
JD.FA.1,CN400005828030000
GE,KT,KT-\TQK1\
GE.IA.D9KI.A
GE,SM.ESKI,G31GCUI+1
VI,DA,A
Statement of claim
MM..SM.1.
MM,SM,1,
C numerical range
50.1,1,CAA
CB/I 15049.9 --1996
"Inner diameter"
, outer diameter\
"Performance level
, surface treatment
, CAA, F1.1
"Comparative parts (nominal thread size") FW.1.H.-1,-140HV+A140',1CUH]C
Heart special data item
TDNR FA A
ZA,DA:]
3.5,0.3.1.5
ID.NN,'GR =287—BJ'
ID,NT: Extra large gasket C grade
ID,NB,'NE* potential diagram GH 5287—85—$CAA.—100HV\IT3,AD,U55. 06. UI
T,V.S4c904.1
D.EA.1,CN4000068E8920000
ID,F,2. 1
GF.KT,'RT- T9K1
GEPA.D9KIA
GE.SM.D0K1CB1000$1.1
VI,DA.A.FI,1,
C Persistent Options
C. Conservative Data Items
60,1.1.CAA
DA.1,10R.
GB/ 15049.9—1955
.CAA.I2
, sales grade
surface treatment
, matching cattle (hatching nominal size)
5.5,182,5
ID.NN,GB U7-2—H5
TT,VT, flat pad legend angle type first level
ID.NR.NB=\垒GB97.2.-95$CAA.—$IT.\JI).A,1S86.05. 01
ID,VT.64R94.1
JD.FA1.CN(000SSHS0000
11).F.2.1
GE.KT.KT=*DUK2n
GE,PA,DAK2,A
GE,SM.DSK2GB1CI,
VI.DA,AF4.1,BJ2
CCharacteristic maintenance item
ZA,MM,G
MM.SM.1,40,1.lH
CValue range
60,1,1.C4A
，Inner diameter
，External roundness
R/T 15049.9—1996
, performance and other spots?
, surface treatment ring!
, matching parts (nominal thread size +)
FW.-.H..1-0HVA1O.ICSHV]
C characteristic effect interference item
CAFIDNR
ID.NN,GS 851-88
T.NT, opening potential diagram
.NB,JEiEAA.EQ.\A\NB=\pad GB851SESCAA.Per
ID,NB,IF(FAA.EQ.\B\INB=\hot circle GB 85I-88-BSCAA.—SB.\TT.AT,1989.01.21
ID,VD.9.0G01.1
I5,FA.1,CN4CC53888800CC35
11,F[,2.1| |tt||GE.KT.\I(EAA.EO.\A\KT=DK3\GE,KT,IF(EAA.EQ.\B\KT-\D9N4\GE.PA,D9K3.A
GE.PA.D9K4-A
GE,SM. D9K3GB10S1,1
CE.SM,DK4,CB10ST'1
,AAA,AAR,AAC:
VI.DA.A.12.H.JS.C.12.AAA.J2.AAB,F3.1.AAC.F3.I.CAA,13.2
Heart characteristic capture item
ZA,MM,10
30.1.1.t.
60,-.1.AAA
7C,1.1,4AB
MM.GM,1. &.1.1.AAC
C Numerical range
SO,I,I,CAA
1,1.3,EAA
FW,2.EAA,A'A',B',B
C. Characteristic number
IDNR FAA
DA.1.1C.:,
GB/T 75049. 9—1996
and width
, outer diameter
, thickness
"performance level"
, surface
, anti-head virtual preparation
, countersunk seat depth
, reverse size
matching seasonal parts (thread nominal size small"
, type
AABAACCAA
13..6,.5,5
H\mm\,2
't*mm'z
,mm',z9—1955
.CAA.I2
, sales grade
surface treatment
, matching cattle (hatching nominal size)
5.5,182,5
ID.NN,GB U7-2—H5
TT,VT, flat pad legend angle type first level
ID.NR.NB=\垒GB97.2.-95$CAA.—$IT.\JI).A,1S86.05. 01
ID,VT.64R94.1
JD.FA1.CN(000SSHS0000
11).F.2.1
GE.KT.KT=*DUK2n
GE,PA,DAK2,A
GE,SM.DSK2GB1CI,
VI.DA,AF4.1,BJ2
CCharacteristic maintenance item
ZA,MM,G
MM.SM.1,40,1.lH
CValue range
60,1,1.C4A
，Inner diameter
，External roundness
R/T 15049.9—1996
, performance and other spots?
, surface treatment ring!
, matching parts (nominal thread size +)
FW.-.H..1-0HVA1O.ICSHV]
C characteristic effect interference item
CAFIDNR
ID.NN,GS 851-88
T.NT, opening potential diagram
.NB,JEiEAA.EQ.\A\NB=\pad GB851SESCAA.Per
ID,NB,IF(FAA.EQ.\B\INB=\hot circle GB 85I-88-BSCAA.—SB.\TT.AT,1989.01.21
ID,VD.9.0G01.1
I5,FA.1,CN4CC53888800CC35
11,F[,2.1| |tt||GE.KT.\I(EAA.EO.\A\KT=DK3\GE,KT,IF(EAA.EQ.\B\KT-\D9N4\GE.PA,D9K3.A
GE.PA.D9K4-A
GE,SM. D9K3GB10S1,1
CE.SM,DK4,CB10ST'1
,AAA,AAR,AAC:
VI.DA.A.12.H.JS.C.12.AAA.J2.AAB,F3.1.AAC.F3.I.CAA,13.2
Heart characteristic capture item
ZA,MM,10
30.1.1.t.
60,-.1.AAA
7C,1.1,4AB
MM.GM,1. &.1.1.AAC
C Numerical range
SO,I,I,CAA
1,1.3,EAA
FW,2.EAA,A'A',B',B
C. Characteristic number
IDNR FAA
DA.1.1C.:,
GB/T 75049. 9—1996
and width
, outer diameter
, thickness
"performance level"
, surface
, anti-head virtual preparation
, countersunk seat depth
, reverse size
matching seasonal parts (thread nominal size small"
, type
AABAACCAA
13..6,.5,5
H\mm\,2
't*mm'z
,mm',z9—1955
.CAA.I2
, sales grade
surface treatment
, matching cattle (hatching nominal size)
5.5,182,5
ID.NN,GB U7-2—H5
TT,VT, flat pad legend angle type first level
ID.NR.NB=\垒GB97.2.-95$CAA.—$IT.\JI).A,1S86.05. 01
ID,VT.64R94.1
JD.FA1.CN(000SSHS0000
11).F.2.1
GE.KT.KT=*DUK2n
GE,PA,DAK2,A
GE,SM.DSK2GB1CI,
VI.DA,AF4.1,BJ2
CCharacteristic maintenance item
ZA,MM,G
MM.SM.1,40,1.lH
CValue range
60,1,1.C4A
，Inner diameter
，External roundness
R/T 15049.9—1996
, performance and other spots?
, surface treatment ring!
, matching parts (nominal thread size +)
FW.-.H..1-0HVA1O.ICSHV]
C characteristic effect interference item
CAFIDNR
ID.NN,GS 851-88
T.NT, opening potential diagram
.NB,JEiEAA.EQ.\A\NB=\pad GB851SESCAA.Per
ID,NB,IF(FAA.EQ.\B\INB=\hot circle GB 85I-88-BSCAA.—SB.\TT.AT,1989.01.21
ID,VD.9.0G01.1
I5,FA.1,CN4CC53888800CC35
11,F[,2.1| |tt||GE.KT.\I(EAA.EO.\A\KT=DK3\GE,KT,IF(EAA.EQ.\B\KT-\D9N4\GE.PA,D9K3.A
GE.PA.D9K4-A
GE,SM. D9K3GB10S1,1
CE.SM,DK4,CB10ST'1
,AAA,AAR,AAC:
VI.DA.A.12.H.JS.C.12.AAA.J2.AAB,F3.1.AAC.F3.I.CAA,13.2
Heart characteristic capture item
ZA,MM,10
30.1.1.t.
60,-.1.AAA
7C,1.1,4AB
MM.GM,1. &.1.1.AAC
C Numerical range
SO,I,I,CAA
1,1.3,EAA
FW,2.EAA,A'A',B',B
C. Characteristic number
IDNR FAA
DA.1.1C.:,
GB/T 75049. 9—1996
and width
, outer diameter
, thickness
"performance level"
, surface
, anti-head virtual preparation
, countersunk seat depth
, reverse size
matching seasonal parts (thread nominal size small"
, type
AABAACCAA
13..6,.5,5
H\mm\,2
't*mm'z
,mm',z
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.