This standard specifies the equipment and materials, test procedures and test reports for the test methods required for the classification and grading of explosiveness in dangerous goods. GB/T 21570-2008 Test method for partitions of dangerous goods GB/T21570-2008 Standard download decompression password: www.bzxz.net
This standard specifies the equipment and materials, test procedures and test reports for the test methods required for the classification and grading of explosiveness in dangerous goods. ||
tt|| This standard corresponds to the United Nations "Recommendations on the Transport of Dangerous Goods Model Regulations" and the United Nations "Recommendations on the Transport of Dangerous Goods Manual of Tests and Criteria", and the degree of consistency with them is non-equivalent. Its relevant technical content is completely consistent with the above manuals, and the standard text
format has been edited according to GB/T1.1-2000.
This standard is proposed and managed by the National Technical Committee for Standardization of Dangerous Chemicals Management (SAC/TC251). The
responsible drafting unit of this standard: Tianjin Institute of Inspection and Quarantine Science and Technology.
Participating drafting organizations of this standard: Jiangnan University, Sinochem Chemical Standardization Institute, Tianjin Entry-Exit Inspection and Quarantine Bureau.
Main drafters of this standard: Wang Libing, Liu Rui, Xu Chuanlai, Feng Zhixie, Wang Xiaobing, Zhou Lei.
This standard is published for the first time.
GB 8031-2006 Industrial electric detonators

ICS 13.300
China National Standard
GB/T21570-2008
Dangerous goods
Partition test method
Dangerons goods--Gap test mtthad2008-04-01
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China Standardization Administration of China
2008-09-01 Implementation
8/21570-2008
This standard corresponds to the United States and the United Kingdom and Italy's "Quality Standard for the Transport of Goods", and is related to the non-equivalent The technical capacity and the new effect are fully realized in the standard text format 8/T1.1200. This standard is edited and revised by the National Dangerous Chemicals Standardization Investment Committee (SAC/TC51). The quality of this standard is super-fastened and the quality of this standard is improved. The units participating in the preparation of this standard are: Jiangshang University, Sinochem Chemical Research Institute, Tianjin Inspection and Quarantine Bureau. The main promoters of this standard are: Liu Rui, Shu Chuan, Ma Dong, Zheng Sui Ying, Lu. This standard is the first release of
Partition test method
Dangerous goods
G8/T 21570~2008
This standard specifies the design of the test method, test activities and test report required for the classification and grading of the explosiveness of the product.
2 This standard is not applicable to the testing of the following hazardous substances: Hazards of explosive products used in production
Hazards of explosive products in production
Hazards of unpackaged explosive substances in the environment
Hazards caused by static electricity
Improper operation
2. Regulatory references
The following documents have been amended through this standard (excluding the contents that can be read) and are authorized to be used.
CB 8331
's most beautiful version of science
"Nan
Joint micro-experimental cargo transportation
Jointly willing to
World Gold Cargo Shipping Ticket
3 Water Language and Definition
United National Relations
I teach the old micro-middle
elegant and strict book with
on the benefit of technical science
explosion pls
in a very short period of time, rare
inscription of the top phenomenon.
Sheng internal standard
not to say the money door standard slip
beautiful chapter leisurely
police blanket rush
is the document that all subsequent
the most suitable for the preparation of this standard.
"Commercial acid cargo transportation auxiliary leopard recommends special micro-test and scalar energy, strict high temperature, and the effect of large excitation, in the open benefit of high pressure chemical reaction or state change explosive material apsebsante
can spread through its own chemical reaction gas, at the temperature of the picolinaldehyde, the temperature of the table liquid state (or this blue material) can do bad things to the environment when they do not work station gas, virtual inducement. 3.3
explosive articles exnsisertcing
refers to a variety of explosive materials that have... explosive combustion devices. Sea
.1 Pure product police
Cold drawn without micro, outer diameter 4Bmet2mm.Dense thickness 4.cmm0.1mm length 4crm soil 5nm4.2 Super explosive
130g Yuefeng explosive/fine (0:/s) or quarterly explosive/ladder you connect 50/50), hot meal is 50mm1mm.Normal density 1600g/m50kg/mmmbZxz.net
G8/21870---2008
4.3 Fine plate
Poly tape thin film laser film thickness 8 do
4.4 Rolled woven amount
Thickness 1mm02me
4.5 Verification Yi
Square except low carbon Xie Da length 1 n-10 mm,32 mmt0.2 mm4.6 GH80313665): learning tube
4.? Burner
4, 8 Cheng installation diagram
describe the quantity and material according to the group
test material frequency
play explosion shear season explosion explosive steam explosion
H strong material swallow slice.
photo 1 partition test device diagram
5 Cheng test step
put the polyolefin makeup film play complex olefin Bo film tightly cover the color (send to the material deformation) well with the ideal belt around the Huang Jia to seal: G8/1:21570--2008
5.2 test evaluation installed to the top of the steel pipe: if the sample and the steel, the steel pipe can be removed from the new one. When the surface sample is loaded into the Italian tube, the density section of the sample that does not sink is inspected. The whole sample is determined. The apparent density is calculated by the volume of the steel tube through which the sample is inserted. The density is as high as possible when it is transported and exploded.
3,3 steel back high efficiency kidney, the detonating charge is placed tightly on the steel plate. 5,4 Use the plate grid to verify the plate and steel cake. 5.5 The tube needs to be properly assembled before the explosion. The test should be carried out repeatedly, and the explosion of the material should not be observed. 6 Test description
Such as the test of the steel research or verification of a test, the test result is described as "", that is, the material format explosion fee, the rest of the test is regarded as ""
Test report
Test name:
.
Manufacturer's name
Description of the test equipment
Test changes in the steel test results
Test results, and any "explanatory" phenomenon observed in the test: test teaching and clear. The test results of the test personnel in the test are shown in Table 1,
Factor 1 Nesting example
citrus acid, teaching
confirmed acid 2
magnetic love / hot new wine, heart
free oxygen acid sensitive
cupi fall / milk bear, /
palm Xuan lactose. 10230
bangenbo, selected notes
model evil captive. State interpretation request
quit love long through
hanxifa
no grip drink
GB/T 21570-2008
Chinese Medical Sciences Department
national elegant
sensing dangerous goods partition test method
GB;T 31531--330M
China Standard Service Service Agency
Beijing Fuxingmen Heya # Street
Energy Glass Editor: 143
pit aww. spe. net. n
Tel: 885239438253754
China Association for the Promotion of International Trade Printing
All thanks to the film and television bookstore
Opening 3 sheets 0 number of students: school
First year of use of the first year of the first film
Price, etc., 4805 + 1 1338 double 10.00 Good printing blue cans original publishing house issued the life of the macro exchange move right special set slow right will be investigated
voting phone: (010) 88533533
8002-01912 1/0
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.