Rules for the inspection of transport packaging for export commodities—Corrugated fiberboard box
Some standard content:
Industry Standard of the People's Republic of China for Import and Export Commodity Inspection SN/T 0262:93
Rules for the inspection of lransport packaging forexport commodilies-Corrugated fiberboard box
Promulgated on December 15, 1993
Implementation by the State Import and Export Commodity Inspection Bureau of the People's Republic of China on May 1, 1994
Industry Standard of the People's Republic of China for Import and Export Commodity Inspection
Rules for the Inspection of lransport packaging forexport commodilles-Corrugated fiberboard box1 Content and Scope of Application
SN/T 0262-93
This standard defines the technical requirements, inspection items, batch samples and inspection methods for lransport packaging forexport commodities. This standard applies to the inspection of single-walled cartons and red-walled cartons (called carton boxes) for packaging of products exported by sea, land and air. 2 Reference standards GB191 Packaging conditions and indicators B450 Paper and paperboard sampling GH452 Determination of moisture content in paper and paperboard GB2828 Batch inspection sequence and summary table (for inspection of single batches) Initial packaging test GB 4557. 3
Basic inspection of packaging before transportation
Basic test of packaging before transportation
Basic test of production
GB5C33
CB6C34
GR6543
GB#511
UB6545
GB6546
GB9174
Temperature and humidity adjustment treatment
Push code test force method
Test station
Consult the qualified test acceptor
Japanese product packaging carton
Product packaging paper
Wave paper sheath
Latex paperboard
Flexible paperboard
Test method of reprint inspection| |tt||Determination of the edge strength of cardboard
Determination of the thickness of cardboard
Method for determining the strength of cardboard
General technical specifications for general cargo transportation packaging
ZBA 01.3 Inspection regulations for dangerous goods packages for export Performance inspection 3 Classification
3.1 According to the drawing, take the dimensions of the inner compartment, the maximum amount of sealing and use cardboard or paper and the type, and divide the dead box into eight categories (see Table 1) National Import and Export Commodity Inspection Regulations of the People's Republic of China on December 15, 1993, approved 1994-C501 real bottle
Single cardboard inspection
The first type
The third type
Made in Europe
SN/T 0262—93
Interior decoration materials
Jiang: When the maximum internal flow and the maximum quantity are not the same, one of them should be selected. 4 Drawing group
4.1 Production criteria
For external inspection, refer to GB828 for details. For energy inspection, refer to ZB871.2 for samples. 4.2 Empty inspection batch
The maximum internal size is one
And the same raw material, the same structure, and the same process for the re-inspection of cartons are one inspection batch, the maximum batch is 2.5 square pieces, 4.3 Efficiency return
4.3.1 External inspection oil test data table 2:
9E~-155
151~28
281--501
5c1~12℃||tt| |121~25
Performance test, type control test recommended data see Table 3, risk guide
standard control test
4.4 Initial group separation
two samples
hazardous items
edge pressure, carbon cold, resistance, adhesion strength test
pressure cavity
training code monitoring
and vertical impact test
point defect number
oil sample
external inspection sample expansion with inch·-cold rejection batch production lead machine extraction. Vertical reflection detail box from the minor defect rush test sample box from the machine: performance stability age from the appearance age test will be drawn from the cause, 5 inspection
5.1 external inspection
5.1.1 inspection objectives
SN/T 0262—93
E.1.1.1 Minor defects: marking, printing, loading, knife door, box nails, core meeting, mystery, selection. 5.1.1.2 Defects: small thickness inside, moisture content, 5.1.2 Inspection method requirements
5.1.2.1 External play start and end form 4 current fixed item standard inspection 4
Minor jump
Night GB1 9 double fixed
: sticky surface encounter case, word river belt positive business, deep roast consistent, it set standard to not greater than double tile paper size not
big ten 7m, expansion line mouth, not degree, break, heavy comprehensive and other evidence trap, shoot two bad for more neglect of the effect of the line
Wan Mingxin and crack report not left
mm grams long not short?mml weak after the fish protection years straight some not too Emn||tt ||Medicine can be used with the embedded steel fan of the county, without the original rust, other layers, and the space between them is not greater than
mm, the center is large, the lower m is small, the edge of the
specification is 13m, the replacement should be hit, and the hit should be selected. No fragrance can be, machine nails, clothes transfer period, etc. are missing to
East joint refers to the replacement of the right pocket & building seat situation paint fragrance order, the whole line is not close to bmm, the station selection is not less than 3mu bonding should be sufficient, no tendency, the station surface agent is not separated,
two joints, large mm:
medium type is not greater than: + small type is not greater than MR, refers to the outer training but one piece, the joint distance difference is not less than 30mm: it is said that each square is not greater than 55rm; the large box does not touch this 1, the medium and small narrow does not exceed? The main barrier after forming can be combined with 7 seats, and the three areas of the surface should be printed with the window garbage department's current code, the distance between the two nails refers to the distance between the two nails, the upper and lower areas of the joint station, the bottom of the two knifes, the more the joint station will produce or the other members of the joint station will have the same effect, and the agent will no longer be delayed by acid. It is said that the oxygen refers to the paper pole ★ and the core or the limit analysis of the joint section. The quantity of the war yang water water SN/T0262-93 continues to form 4. |tt||Operative field requirement
length, research direction single limit energy room,
out bend requirement
type tile damage agent version
paper Fei support mold into surplus, and adjacent support angle version
y and then inside the diameter of the report accounted for the upper distance from the box mouth
Gm at the special limit length:
with the rapid medicine to then inside the direction of all
thickness refers to the exploration between the
separation of the gold series
scale head moisture determination method to provide a micro-determination
natural
task, large, small, the internal size will be greater than or equal to 2000mg., less than 260cmm greater than 1 c00mm, small double equal 1Ionn
5.1-2-2 Moisture content test
5.1.2.2.1 Check the instrument, and the average value is 0.001, calcium box or bad bottle. Dry error, can be held in 100--1G5℃ medicine box 2 and rapid moisture determination.
5.1.2.2.2 Moisture content test: Use the filter analyzer to measure 4 points at each non-returning part, and find the average value of the 5 samples.
Use the rapid water meter to calibrate the instrument. When there is any doubt, use the box method to determine the moisture content. 5.1.2.2.3 Determination of moisture content in a sample box: Weigh about 30g of sample (accurately weigh 0.301g) from different parts of the sample box, tear it into small thin slices, put it in a bottle (or gold), and dry it in a drying oven at 30-105℃ until constant. The weight of each cup should be accurate to weigh 0.1%. The moisture content is calculated according to the fraction 1, where: x =
Total moisture content:
+
Total weight:
+
5.1.3 Appearance insurance inspection batch individual group test
41m×100%
Appearance insurance total cost, according to Table 5 heat determination
Light defect effect
No lamp effect
SN/T 0262—93
Continued Table 5
Number of light defects
Unqualified
5.:3.1 If only one item of a single defect is unqualified, the sample box is unqualified; if only two of the five boxes are unqualified, the appearance inspection is unqualified:
5.1.3.2 If the number of light and salt defects is less than or equal to the qualified number, the batch of appearance inspection is qualified; if it is equal to or greater than the qualified number, the batch of appearance inspection is not selected
5.2 Performance test
5-2.1 Inspection items
Positive drive strength, front glass stain resistance, general penetration, adhesion strength and pressure resistance test. 5.2.2 Precautions and test failures
or sample method GB4857.2 provisions. Temperature 23-27. Relative humidity 50%+5% open air conditioning for 24h, and test under these conditions,
5.2.3 Test collection
three boxes at the temperature and source. Use three sensitive edges to press, expose, assemble, and test the strength of the adhesive platform. The block is discarded for the test block-2: 4 blocks are cut from each box, not less than (15×1 75) and the test specimens: 2 pairs of pump test pieces, cut 4 pieces from each box, not less than (140×14C) mm, no creases or obvious damage:
test run except for 12 missing pieces, cut 4 pieces from each box, the short side is (25×c) mm, the error is 1m. Test specimens:
test sample block design, from each pen inorganic pressure, printing traces that are not damaged, so take 3, the direction of the shot is the short side (25x100m m. Error ±3.5mm. 5.2.4 Compressive strength test 5.2.4.1 Test method GB6155, the average value of the value is expressed as N/T, and the three significant figures are expressed. 5.2.4.2 Test qualification criteria Not exceeding the requirements of Table 6, except for fresh food, vegetable, cold food and easy-to-use goods (except container transportation) should be lower than the requirements of Table 6. The first regulation. The third regulation is to separate the four types of contents from the above. Therefore, the maximum content of the above regulations will be reduced to the minimum resistance strength of Cfiam\; 7.55: ≤10(3) 1.181r(12) 1.57×10(16) 1.96×10/(0) (kg? . r.*:
.81(10e)
dynamic pressure exhaustion,
tkeirm!
×1(5:
5.83X10(6)
5.86xn(7)
chicken will be strong bottom
Nin: show
(kzf）
5.88X10-51
5-88×1G-51
5.88×1c31
second by
brother Liu Ping
the biggest scene
5.2.5 discussion breaking degree test
green combination counterattack
SN/T 0262-93
Preserved egg resistance
(kgf/cm)
1.18X10(12)
. 57X_0(16)
9;j0'(20)
2 55×:0(26)
Sensitive penetration strong spot
Ckgl +cnt')
8-83(90)
10.3:155X
12.3(125)
13. 7:1433
Reach five strong celebration
(sgf/cm)
5.83X1C'(5)
6 85x117)
3 84x:c(5)
Swimming speed
(kzf/em8）
5.88X10()
5. 38 10 (6)
5-5510(6)
5-2.5.1 The test method is as follows, and 4 pieces of each box are tested for the straight and straight rubber width. The measured value of the goods is almost the same, expressed as kP, with three significant figures. 5.2-5.2 Test qualification criteria The test is carried out in accordance with 2.4.2. 5.2.6 is a test method according to GB267S.7. Take 4 samples of each single cream or even 6 samples. This side is tested longitudinally and in reverse direction. The average value of the measured drug ratio is taken as the type strength value. The value is shown in the figure. The third digit is the effective mathematical value. 5.2. 5.2 Test qualification criteria shall comply with 5 2-4-2. 5.2.7 Adhesion strength test
5.2.7.: The following method is in accordance with G548, with each sample subjected to 2 peaks and the paper lock repair paper permanent separation test, and the average of the measured values is the adhesion strength value, expressed in N/m: three significant figures, 5.2.7.2 Test criteria are in accordance with 5.2.4.22. 5.2. 8 Compression test
5.2-8. 1 Trial method
loss GB487.4 World Bank, control code high business m. Pressure resistance value legislation formula (2) calculation PK.GiH
where P
pressure resistance N
K--deterioration coefficient test system); G-single piece packaging gross.kg
H-. Thin machine business.n
box business.n;
—take teaching position.
poor system effect K
32 days-196 days
: the system effect length is determined according to the storage conditions of the paper shrinkage of the objects packed: 5-2.8-2 trial joint venture quality
which welcomes E
when the sample is determined to be under the expansion pressure signal P, the top test is qualified. If the whole box does not meet the requirements, the item or test may fail. 5.2.9 Performance test batch qualification criteria
When all the specified test items have passed, the performance test is judged to be qualified. If one item fails, the performance test is judged to be slightly qualified. 5.3 or inspection
5. 3. 1 Inspection H
Stacking test, vertical impact test.
5.3.2 Requirements
SN/T 262—93
When the following situations occur, the type inspection of the carton transport packaging can be carried out; when the raw materials, equipment or process changes: n
bWhen the supplier and the supplier make requirements
C. When it is necessary.
5.3.3 Stacking test
5.3.3.1 According to GB4857.2, the test material has a 23-2 core material moisture rise of 59 years = 5% and is folded down for 24, and the test is carried out under this condition.
5.3.3.2 Test square teeth
According to GB4853.$. The code is calculated based on the formula <3): N,=x#
Where: - the total code applied on the paper, M, - the gross weight of the single + package.g
H code height:
height m
strain coefficient, see Table Y;
job number.
5.3-3.3 Test pass criteria: All sample boxes are not broken and no waves, this test is qualified, if one of the two standards is not met, this test is judged as a small pass.
5.3.4 Vertical impact drop test
5.3.4, 1 Handling conditions 5.3.3.1.
5.3.4.2 Test period GB4857.5 is carried out, and the drop rate and drop sequence are in accordance with GB4857.5. 5.3.4.3 Test pass criteria: There is no damage when pushing the box, and the contents are not slipping. This test is qualified. Among them, one box is not qualified, and this test is not qualified.
5.3.5 Type inspection is qualified, and the test is qualified, and this model is judged as a qualified. If one certificate fails, the type inspection will be classified as unqualified. 6 General Rules for Judgment
External inspection, performance inspection, type inspection department qualified, state inspection is qualified, as long as there is one unqualified inspection batch is unqualified.
Additional instructions
This standard is proposed by the State Import and Export Commodity Inspection Bureau of the People's Republic of China. This standard is also recommended by the People's Republic of China for the import and export of goods. The standard mainly covers the peak, payment, and other aspects.Fu Yizhuang, the resources are different.Fu Yizhuang, the resources are different.1 If only one item of a single defect fails, the sample box is unqualified; if only two of the five defects fail, the appearance inspection is unqualified:
5.1.3.2 If the number of light and salt defects is less than or equal to the qualified number, the batch of appearance inspection is qualified; if it is equal to or greater than the qualified number, the batch of appearance inspection is not selected.
5.2 Performance test
5-2.1 Inspection items
Positive driving strength, front glass staining degree, general penetration, adhesion strength and pressure resistance test. 5.2.2 Precautions and test failures
or sample method GB4857.2 provisions. Temperature 23-27. Relative humidity 50%+5% open air conditioning for 24h, and test under these conditions,
5.2.3 Test collection
three boxes at the temperature and source. Use three sensitive edges to press, expose, assemble, and test the strength of the adhesive platform. The block is discarded for the test block-2: 4 blocks are cut from each box, not less than (15×1 75) and the test specimens: 2 pairs of pump test pieces, cut 4 pieces from each box, not less than (140×14C) mm, no creases or obvious damage:
test run except for 12 missing pieces, cut 4 pieces from each box, the short side is (25×c) mm, the error is 1m. Test specimens:
test sample block design, from each pen inorganic pressure, printing traces that are not damaged, so take 3, the direction of the shot is the short side (25x100m m. Error ±3.5mm. 5.2.4 Compressive strength test 5.2.4.1 Test method GB6155, the average value of the value is expressed as N/T, and the three significant figures are expressed. 5.2.4.2 Test qualification criteria Not exceeding the requirements of Table 6, except for fresh food, vegetable, cold food and easy-to-use goods (except container transportation) should be lower than the requirements of Table 6. The first regulation. The third regulation is to separate the four types of contents from the above. Therefore, the maximum content of the above regulations will be reduced to the minimum resistance strength of Cfiam\; 7.55: ≤10(3) 1.181r(12) 1.57×10(16) 1.96×10/(0) (kg? . r.*:
.81(10e)
dynamic pressure exhaustion,
tkeirm!
×1(5:
5.83X10(6)
5.86xn(7)
chicken will be strong bottom
Nin: show
(kzf）
5.88X10-51
5-88×1G-51
5.88×1c31
second by
brother Liu Ping
the biggest scene
5.2.5 discussion breaking degree test
green combination counterattack
SN/T 0262-93
Preserved egg resistance
(kgf/cm)
1.18X10(12)
. 57X_0(16)
9;j0'(20)
2 55×:0(26)
Sensitive penetration strong spot
Ckgl +cnt')
8-83(90)
10.3:155X
12.3(125)
13. 7:1433
Reach five strong celebration
(sgf/cm)
5.83X1C'(5)
6 85x117)
3 84x:c(5)
Swimming speed
(kzf/em8）
5.88X10()
5. 38 10 (6)
5-5510(6)
5-2.5.1 The test method is as follows, and 4 pieces of each box are tested for the straight and straight rubber width. The measured value of the goods is almost the same, expressed as kP, with three significant figures. 5.2-5.2 Test qualification criteria The test is carried out in accordance with 2.4.2. 5.2.6 is a test method according to GB267S.7. Take 4 samples of each single cream or even 6 samples. This side is tested longitudinally and in reverse direction. The average value of the measured drug ratio is taken as the type strength value. The value is shown in the figure. The third digit is the effective mathematical value. 5.2. 5.2 Test qualification criteria shall comply with 5 2-4-2. 5.2.7 Adhesion strength test
5.2.7.: The following method is in accordance with G548, with each sample subjected to 2 peaks and the paper lock repair paper permanent separation test, and the average of the measured values is the adhesion strength value, expressed in N/m: three significant figures, 5.2.7.2 Test criteria are in accordance with 5.2.4.22. 5.2. 8 Compression test
5.2-8. 1 Trial method
loss GB487.4 World Bank, control code high business m. Pressure resistance value legislation formula (2) calculation PK.GiH
where P
pressure resistance N
K--deterioration coefficient test system); G-single piece packaging gross.kg
H-. Thin machine business.n
box business.n;
—take teaching position.
poor system effect K
32 days-196 days
: the system effect length is determined according to the storage conditions of the paper shrinkage of the objects packed: 5-2.8-2 trial joint venture quality
which welcomes E
when the sample is determined to be under the expansion pressure signal P, the top test is qualified. If the whole box does not meet the requirements, the item or test may fail. 5.2.9 Performance test batch qualification criteria
When all the specified test items have passed, the performance test is judged to be qualified. If one item fails, the performance test is judged to be slightly qualified. 5.3 or inspection
5. 3. 1 Inspection H
Stacking test, vertical impact test.
5.3.2 Requirements
SN/T 262—93
When the following situations occur, the type inspection of the carton transport packaging can be carried out; when the raw materials, equipment or process changes: n
bWhen the supplier and the supplier make requirements
C. When it is necessary.
5.3.3 Stacking test
5.3.3.1 According to GB4857.2, the test material has a 23-2 core material moisture rise of 59 years = 5% and is folded down for 24, and the test is carried out under this condition.
5.3.3.2 Test square teeth
According to GB4853.$. The code is calculated based on the formula <3): N,=x#
Where: - the total code applied on the paper, M, - the gross weight of the single + package.g
H code height:
height m
strain coefficient, see Table Y;
job number.
5.3-3.3 Test pass criteria: All sample boxes are not broken and no waves, this test is qualified, if one of the two standards is not met, this test is judged as a small pass.
5.3.4 Vertical impact drop test
5.3.4, 1 Handling conditions 5.3.3.1.
5.3.4.2 Test period GB4857.5 is carried out, and the drop rate and drop sequence are in accordance with GB4857.5. 5.3.4.3 Test pass criteria: There is no damage when pushing the box, and the contents are not slipping. This test is qualified. Among them, one box is not qualified, and this test is not qualified.
5.3.5 Type inspection is qualified, and the test is qualified, and this model is judged as a qualified. If one certificate fails, the type inspection will be classified as unqualified. 6 General Rules for Judgment
External inspection, performance inspection, type inspection department qualified, state inspection is qualified, as long as there is one unqualified inspection batch is unqualified.
Additional instructions
This standard is proposed by the State Import and Export Commodity Inspection Bureau of the People's Republic of China. This standard is also recommended by the People's Republic of China for the import and export of goods. The standard mainly covers the peak, payment, and other aspects.1 If only one item of a single defect fails, the sample box is unqualified; if only two of the five defects fail, the appearance inspection is unqualified:
5.1.3.2 If the number of light and salt defects is less than or equal to the qualified number, the batch of appearance inspection is qualified; if it is equal to or greater than the qualified number, the batch of appearance inspection is not selected.
5.2 Performance test
5-2.1 Inspection items
Positive driving strength, front glass staining degree, general penetration, adhesion strength and pressure resistance test. 5.2.2 Precautions and test failures
or sample method GB4857.2 provisions. Temperature 23-27. Relative humidity 50%+5% open air conditioning for 24h, and test under these conditions,
5.2.3 Test collection
three boxes at the temperature and source. Use three sensitive edges to press, expose, assemble, and test the strength of the adhesive platform. The block is discarded for the test block-2: 4 blocks are cut from each box, not less than (15×1 75) and the test specimens: 2 pairs of pump test pieces, cut 4 pieces from each box, not less than (140×14C) mm, no creases or obvious damage:
test run except for 12 missing pieces, cut 4 pieces from each box, the short side is (25×c) mm, the error is 1m. Test specimens:
test sample block design, from each pen inorganic pressure, printing traces that are not damaged, so take 3, the direction of the shot is the short side (25x100m m. Error ±3.5mm. 5.2.4 Compressive strength test 5.2.4.1 Test method GB6155, the average value of the value is expressed as N/T, and the three significant figures are expressed. 5.2.4.2 Test qualification criteria Not exceeding the requirements of Table 6, except for fresh food, vegetable, cold food and easy-to-use goods (except container transportation) should be lower than the requirements of Table 6. The first regulation. The third regulation is to separate the four types of contents from the above. Therefore, the maximum content of the above regulations will be reduced to the minimum resistance strength of Cfiam\; 7.55: ≤10(3) 1.181r(12) 1.57×10(16) 1.96×10/(0) (kg? . r.*:
.81(10e)
dynamic pressure exhaustion,
tkeirm!
×1(5:
5.83X10(6)
5.86xn(7)
chicken will be strong bottom
Nin: show
(kzf）
5.88X10-51
5-88×1G-51
5.88×1c31
second by
brother Liu Ping
the biggest scene
5.2.5 discussion breaking degree test
green combination counterattack
SN/T 0262-93
Preserved egg resistance
(kgf/cm)
1.18X10(12)
. 57X_0(16)
9;j0'(20)
2 55×:0(26)
Sensitive penetration strong spot
Ckgl +cnt')
8-83(90)
10.3:155X
12.3(125)
13. 7:1433
Reach five strong celebration
(sgf/cm)
5.83X1C'(5)
6 85x117)
3 84x:c(5)
Swimming speed
(kzf/em8）
5.88X10()
5. 38 10 (6)
5-5510(6)
5-2.5.1 The test method is as follows, and 4 pieces of each box are tested for the straight and straight rubber width. The measured value of the goods is almost the same, expressed as kP, with three significant figures. 5.2-5.2 Test qualification criteria The test is carried out in accordance with 2.4.2. 5.2.6 is a test method according to GB267S.7. Take 4 samples of each single cream or even 6 samples. This side is tested longitudinally and in reverse direction. The average value of the measured drug ratio is taken as the type strength value. The value is shown in the figure. The third digit is the effective mathematical value. 5.2. 5.2 Test qualification criteria shall comply with 5 2-4-2. 5.2.7 Adhesion strength test
5.2.7.: The following method is in accordance with G548, with each sample subjected to 2 peaks and the paper lock repair paper permanent separation test, and the average of the measured values is the adhesion strength value, expressed in N/m: three significant figures, 5.2.7.2 Test criteria are in accordance with 5.2.4.22. 5.2. 8 Compression test
5.2-8. 1 Trial method
loss GB487.4 World Bank, control code high business m. Pressure resistance value legislation formula (2) calculation PK.GiH
where P
pressure resistance N
K--deterioration coefficient test system); G-single piece packaging gross.kg
H-. Thin machine business.n
box business.n;
—take teaching position.
poor system effect K
32 days-196 days
: the system effect length is determined according to the storage conditions of the paper shrinkage of the objects packed: 5-2.8-2 trial joint venture quality
which welcomes E
when the sample is determined to be under the expansion pressure signal P, the top test is qualified. If the whole box does not meet the requirements, the item or test may fail. 5.2.9 Performance test batch qualification criteria
When all the specified test items have passed, the performance test is judged to be qualified. If one item fails, the performance test is judged to be slightly qualified. 5.3 or inspection
5. 3. 1 Inspection H
Stacking test, vertical impact test.
5.3.2 Requirements
SN/T 262—93
When the following situations occur, the type inspection of the carton transport packaging can be carried out; when the raw materials, equipment or process changes: n
bWhen the supplier and the supplier make requirements
C. When it is necessary.
5.3.3 Stacking test
5.3.3.1 According to GB4857.2, the test material has a 23-2 core material moisture rise of 59 years = 5% and is folded down for 24, and the test is carried out under this condition.
5.3.3.2 Test square teeth
According to GB4853.$. The code is calculated based on the formula <3): N,=x#
Where: - the total code applied on the paper, M, - the gross weight of the single + package.g
H code height:
height m
strain coefficient, see Table Y;
job number.
5.3-3.3 Test pass criteria: All sample boxes are not broken and no waves, this test is qualified, if one of the two standards is not met, this test is judged as a small pass.
5.3.4 Vertical impact drop test
5.3.4, 1 Handling conditions 5.3.3.1.
5.3.4.2 Test period GB4857.5 is carried out, and the drop rate and drop sequence are in accordance with GB4857.5. 5.3.4.3 Test pass criteria: There is no damage when pushing the box, and the contents are not slipping. This test is qualified. Among them, one box is not qualified, and this test is not qualified.
5.3.5 Type inspection is qualified, and the test is qualified, and this model is judged as a qualified. If one certificate fails, the type inspection will be classified as unqualified. 6 General Rules for Judgment
External inspection, performance inspection, type inspection department qualified, state inspection is qualified, as long as there is one unqualified inspection batch is unqualified.
Additional instructions
This standard is proposed by the State Import and Export Commodity Inspection Bureau of the People's Republic of China. This standard is also recommended by the People's Republic of China for the import and export of goods. The standard mainly covers the peak, payment, and other aspects.1 Test items
positive drive strength, pre-glass staining, general penetration, bonding strength pressure test. 5.2.2 Pre-inhibition and test failure inspection
or sample method GB4857.2 provisions. East error 23 soil 27. Relative humidity 50% above 5% open environment treatment for 24h, and the car test under this condition,
5.2.3 Test push the collection
three temperature, source of the screw box. Use three sensitive edge pressure, exposure penetration, assembly, bonding strength test sweep block, micro discard test bar block -2 decision: take 4 pieces from the state box warning, not less than (15×1 75) and the test specimens: 2 pairs of pump test pieces, cut 4 pieces from each box, not less than (140×14C) mm, no creases or obvious damage:
test run except for 12 missing pieces, cut 4 pieces from each box, the short side is (25×c) mm, the error is 1m. Test specimens:
test sample block design, from each pen inorganic pressure, printing traces that are not damaged, so take 3, the direction of the shot is the short side (25x100m m. Error ±3.5mm. 5.2.4 Compressive strength test 5.2.4.1 Test method GB6155, the average value of the value is expressed as N/T, and the three significant figures are expressed. 5.2.4.2 Test qualification criteria Not exceeding the requirements of Table 6, except for fresh food, vegetable, cold food and easy-to-use goods (except container transportation) should be lower than the requirements of Table 6. The first regulation. The third regulation is to separate the four types of contents from the above. Therefore, the maximum content of the above regulations will be reduced to the minimum resistance strength of Cfiam\; 7.55: ≤10(3) 1.181r(12) 1.57×10(16) 1.96×10/(0) (kg? . r.*:
.81(10e)
dynamic pressure exhaustion,
tkeirm!
×1(5:
5.83X10(6)
5.86xn(7)
chicken will be strong bottom
Nin: show
(kzf）
5.88X10-51
5-88×1G-51
5.88×1c31
second by
brother Liu Ping
the biggest scene
5.2.5 discussion breaking degree test
green combination counterattack
SN/T 0262-93
Preserved egg resistance
(kgf/cm)
1.18X10(12)
. 57X_0(16)
9;j0'(20)
2 55×:0(26)
Sensitive penetration strong spot
Ckgl +cnt')
8-83(90)
10.3:155X
12.3(125)
13. 7:1433
Reach five strong celebration
(sgf/cm)
5.83X1C'(5)
6 85x117)
3 84x:c(5)
Swimming speed
(kzf/em8）
5.88X10()
5. 38 10 (6)
5-5510(6)
5-2.5.1 The test method is as follows, and 4 pieces of each box are tested for the straight and straight rubber width. The measured value of the goods is almost the same, expressed as kP, with three significant figures. 5.2-5.2 Test qualification criteria The test is carried out in accordance with 2.4.2. 5.2.6 is a test method according to GB267S.7. Take 4 samples of each single cream or even 6 samples. This side is tested longitudinally and in reverse direction. The average value of the measured drug ratio is taken as the type strength value. The value is shown in the figure. The third digit is the effective mathematical value. 5.2. 5.2 Test qualification criteria shall comply with 5 2-4-2. 5.2.7 Adhesion strength test
5.2.7.: The following method is in accordance with G548, with each sample subjected to 2 peaks and the paper lock repair paper permanent separation test, and the average of the measured values is the adhesion strength value, expressed in N/m: three significant figures, 5.2.7.2 Test criteria are in accordance with 5.2.4.22. 5.2. 8 Compression test
5.2-8. 1 Trial method
loss GB487.4 World Bank, control code high business m. Pressure resistance value legislation formula (2) calculation PK.GiH
where P
pressure resistance N
K--deterioration coefficient test system); G-single piece packaging gross.kg
H-. Thin machine business.n
box business.n;
—take teaching position.
poor system effect K
32 days-196 days
: the system effect length is determined according to the storage conditions of the paper shrinkage of the objects packed: 5-2.8-2 trial joint venture quality
which welcomes E
when the sample is determined to be under the expansion pressure signal P, the top test is qualified. If the whole box does not meet the requirements, the item or test may fail. 5.2.9 Performance test batch qualification criteria
When all the specified test items have passed, the performance test is judged to be qualified. If one item fails, the performance test is judged to be slightly qualified. 5.3 or inspection
5. 3. 1 Inspection H
Stacking test, vertical impact test.
5.3.2 Requirements
SN/T 262—93
When the following situations occur, the type inspection of the carton transport packaging can be carried out; when the raw materials, equipment or process changes: n
bWhen the supplier and the supplier make requirements
C. When it is necessary.
5.3.3 Stacking test
5.3.3.1 According to GB4857.2, the test material has a 23-2 core material moisture rise of 59 years = 5% and is folded down for 24, and the test is carried out under this condition.
5.3.3.2 Test square teeth
According to GB4853.$. The code is calculated based on the formula <3): N,=x#
Where: - the total code applied on the paper, M, - the gross weight of the single + package.g
H code height:
height m
strain coefficient, see Table Y;
job number.
5.3-3.3 Test pass criteria: All sample boxes are not broken and no waves, this test is qualified, if one of the two standards is not met, this test is judged as a small pass.
5.3.4 Vertical impact drop test
5.3.4, 1 Handling conditions 5.3.3.1.
5.3.4.2 Test period GB4857.5 is carried out, and the drop rate and drop sequence are in accordance with GB4857.5. 5.3.4.3 Test pass criteria: There is no damage when pushing the box, and the contents are not slipping. This test is qualified. Among them, one box is not qualified, and this test is not qualified.
5.3.5 Type inspection is qualified, and the test is qualified, and this model is judged as a qualified. If one certificate fails, the type inspection will be classified as unqualified. 6 General Rules for Judgment
External inspection, performance inspection, type inspection department qualified, state inspection is qualified, as long as there is one unqualified inspection batch is unqualified.
Additional instructions
This standard is proposed by the State Import and Export Commodity Inspection Bureau of the People's Republic of China. This standard is also recommended by the People's Republic of China for the import and export of goods. The standard mainly covers the peak, payment, and other aspects.1 Test items
positive drive strength, pre-glass staining, general penetration, bonding strength pressure test. 5.2.2 Pre-inhibition and test failure inspection
or sample method GB4857.2 provisions. East error 23 soil 27. Relative humidity 50% above 5% open environment treatment for 24h, and the car test under this condition,
5.2.3 Test push the collection
three temperature, source of the screw box. Use three sensitive edge pressure, exposure penetration, assembly, bonding strength test sweep block, micro discard test bar block -2 decision: take 4 pieces from the state box warning, not less than (15×1 75) and the test specimens: 2 pairs of pump test pieces, cut 4 pieces from each box, not less than (140×14C) mm, no creases or obvious damage:
test run except for 12 missing pieces, cut 4 pieces from each box, the short side is (25×c) mm, the error is 1m. Test specimens:
test sample block design, from each pen inorganic pressure, printing traces that are not damaged, so take 3, the direction of the shot is the short side (25x100m m. Error ±3.5mm. 5.2.4 Compressive strength test 5.2.4.1 Test method GB6155, the average value of the value is expressed as N/T, and the three significant figures are expressed. 5.2.4.2 Test qualification criteria Not exceeding the requirements of Table 6, except for fresh food, vegetable, cold food and easy-to-use goods (except container transportation) should be lower than the requirements of Table 6. The first regulation. The third regulation is to separate the four types of contents from the above. Therefore, the maximum content of the above regulations will be reduced to the minimum resistance strength of Cfiam\; 7.55: ≤10(3) 1.181r(12) 1.57×10(16) 1.96×10/(0) (kg? . r.*:
.81(10e)
dynamic pressure exhaustion,
tkeirm!
×1(5:
5.83X10(6)
5.86xn(7)
chicken will be strong bottom
Nin: show
(kzf）
5.88X10-51
5-88×1G-51
5.88×1c31
second by
brother Liu Ping
the biggest scene
5.2.5 discussion breaking degree test
green combination counterattack
SN/T 0262-93
Preserved egg resistance
(kgf/cm)
1.18X10(12)
. 57X_0(16)
9;j0'(20)
2 55×:0(26)
Sensitive penetration strong spot
Ckgl +cnt')
8-83(90)
10.3:155X
12.3(125)
13. 7:1433
Reach five strong celebration
(sgf/cm)
5.83X1C'(5)
6 85x117)
3 84x:c(5)
Swimming speed
(kzf/em8）
5.88X10()
5. 38 10 (6)
5-5510(6)
5-2.5.1 The test method is as follows, and 4 pieces of each box are tested for the straight and straight rubber width. The measured value of the goods is almost the same, expressed as kP, with three significant figures. 5.2-5.2 Test qualification criteria The test is carried out in accordance with 2.4.2. 5.2.6 is a test method according to GB267S.7. Take 4 samples of each single cream or even 6 samples. This side is tested longitudinally and in reverse direction. The average value of the measured drug ratio is taken as the type strength value. The value is shown in the figure. The third digit is the effective mathematical value. 5.2. 5.2 Test qualification criteria shall comply with 5 2-4-2. 5.2.7 Adhesion strength test
5.2.7.: The following method is in accordance with G548, with each sample subjected to 2 peaks and the paper lock repair paper permanent separation test, and the average of the measured values is the adhesion strength value, expressed in N/m: three significant figures, 5.2.7.2 Test criteria are in accordance with 5.2.4.22. 5.2. 8 Compression test
5.2-8. 1 Trial method
loss GB487.4 World Bank, control code high business m. Pressure resistance value legislation formula (2) calculation PK.GiH
where P
pressure resistance N
K--deterioration coefficient test system); G-single piece packaging gross.kg
H-. Thin machine business.n
box business.n;
—take teaching position.
poor system effect K
32 days-196 days
: the system effect length is determined according to the storage conditions of the paper shrinkage of the objects packed: 5-2.8-2 trial joint venture quality
which welcomes E
when the sample is determined to be under the expansion pressure signal P, the top test is qualified. If the whole box does not meet the requirements, the item or test may fail. 5.2.9 Performance test batch qualification criteria
When all the specified test items have passed, the performance test is judged to be qualified. If one item fails, the performance test is judged to be slightly qualified. 5.3 or inspection
5. 3. 1 Inspection H
Stacking test, vertical impact test.
5.3.2 Requirements
SN/T 262—93
When the following situations occur, the type inspection of the carton transport packaging can be carried out; when the raw materials, equipment or process changes: n
bWhen the supplier and the supplier make requirements
C. When it is necessary.
5.3.3 Stacking test
5.3.3.1 According to GB4857.2, the test material has a 23-2 core material moisture rise of 59 years = 5% and is folded down for 24, and the test is carried out under this condition.
5.3.3.2 Test square teeth
According to GB4853.$. The code is calculated based on the formula <3): N,=x#
Where: - the total code applied on the paper, M, - the gross weight of the single + package.g
H code height:
height m
strain coefficient, see Table Y;
job number.
5.3-3.3 Test pass criteria: All sample boxes are not broken and no waves, this test is qualified, if one of the two standards is not met, this test is judged as a small pass.
5.3.4 Vertical impact drop test
5.3.4, 1 Handling conditions 5.3.3.1.
5.3.4.2 Test period GB4857.5 is carried out, and the drop rate and drop sequence are in accordance with GB4857.5. 5.3.4.3 Test pass criteria: There is no damage when pushing the box, and the contents are not slipping. This test is qualified. Among them, one box is not qualified, and this test is not qualified.
5.3.5 Type inspection is qualified, and the test is qualified, and this model is judged as a qualified. If one certificate fails, the type inspection will be classified as unqualified. 6 General Rules for Judgment
External inspection, performance inspection, type inspection department qualified, state inspection is qualified, as long as there is one unqualified inspection batch is unqualified.
Additional instructions
This standard is proposed by the State Import and Export Commodity Inspection Bureau of the People's Republic of China. This standard is also recommended by the People's Republic of China for the import and export of goods. The standard mainly covers the peak, payment, and other aspects.Use three-dimensional edge pressure, exposed wear, assembly, adhesion test, sweep block, micro-discard test block -2 decision: cut 4 pieces from each box, not less than (15×175) and the sample: pump resistance test group block 2 pairs, cut 4 pieces from each box, not less than + (140×14C) mm, no crease or obvious damage:
station test run except missing 12 pieces, cut 4 pieces from each box, tile slow The test specimen with the short side (25×c) mm and an error of ±1 mm:
The test specimen is found in the hall, and the printing trace is not damaged. Therefore, 3 decisions are made. The direction of the test specimen is the short side (25x100mm. When the error is ±3.5mm, the test is carried out according to GB6155. The average value of the measured value is expressed in N/T, and the table has three significant figures. 5.2.4.2 Test qualification criteria
Not exceeding the provisions of Table 6, the ratio of fresh food, vegetable food, cold food and easy-to-transport products (except container transportation) should be lower than the first provision in Table 6.
The third type
The fourth type ||t t||Contents
Therefore, the above is the maximum content
Except for the people
Resistant strength
Cfiam\;
7.55:≤10(3)
1.181r(12)
1.57×10(16)
1.96×10/(0)
(kg? . r.*:
.81(10e)
dynamic pressure exhaustion,
tkeirm!
×1(5:
5.83X10(6)
5.86xn(7)
chicken will be strong bottom
Nin: show
(kzf）
5.88X10-51
5-88×1G-51
5.88×1c31
second by
brother Liu Ping
the biggest scene
5.2.5 discussion breaking degree test
green combination counterattack
SN/T 0262-93
Preserved egg resistance
(kgf/cm)
1.18X10(12)
. 57X_0(16)
9;j0'(20)
2 55×:0(26)
Sensitive penetration strong spot
Ckgl +cnt')
8-83(90)
10.3:155X
12.3(125)
13. 7:1433
Reach five strong celebration
(sgf/cm)
5.83X1C'(5)
6 85x117)
3 84x:c(5)
Swimming speed
(kzf/em8）
5.88X10()
5. 38 10 (6)
5-5510(6)
5-2.5.1 The test method is as follows, and 4 pieces of each box are tested for the straight and straight rubber width. The measured value of the goods is almost the same, expressed as kP, with three significant figures. 5.2-5.2 Test qualification criteria The test is carried out in accordance with 2.4.2. 5.2.6 is a test method according to GB267S.7. Take 4 samples of each single cream or even 6 samples. This side is tested longitudinally and in reverse direction. The average value of the measured drug ratio is taken as the type strength value. The value is shown in the figure. The third digit is the effective mathematical value. 5.2. 5.2 Test qualification criteria shall comply with 5 2-4-2. 5.2.7 Adhesion strength test
5.2.7.: The following method is in accordance with G548, with each sample subjected to 2 peaks and the paper lock repair paper permanent separation test, and the average of the measured values is the adhesion strength value, expressed in N/m: three significant figures, 5.2.7.2 Test criteria are in accordance with 5.2.4.22. 5.2. 8 Compression test
5.2-8. 1 Trial method
loss GB487.4 World Bank, control code high business m. Pressure resistance value legislation formula (2) calculation PK.GiH
where P
pressure resistance N
K--deterioration coefficient test system); G-single piece packaging gross.kg
H-. Thin machine business.n
box business.n;
—take teaching position.
poor system effect K
32 days-196 days
: the system effect length is determined according to the storage conditions of the paper shrinkage of the objects packed: 5-2.8-2 trial joint venture quality
which welcomes E
when the sample is determined to be under the expansion pressure signal P, the top test is qualified. If the whole box does not meet the requirements, the item or test may fail. 5.2.9 Performance test batch qualification criteria
When all the specified test items have passed, the performance test is judged to be qualified. If one item fails, the performance test is judged to be slightly qualified. 5.3 or inspection
5. 3. 1 Inspection H
Stacking test, vertical impact test.
5.3.2 Requirements
SN/T 262—93
When the following situations occur, the type inspection of the carton transport packaging can be carried out; when the raw materials, equipment or process changes: n
bWhen the supplier and the supplier make requirements
C. When it is necessary.
5.3.3 Stacking test
5.3.3.1 According to GB4857.2, the test material has a 23-2 core material moisture rise of 59 years = 5% and is folded down for 24, and the test is carried out under this condition.
5.3.3.2 Test square teeth
According to GB4853.$. The code is calculated based on the formula <3): N,=x#
Where: - the total code applied on the paper, M, - the gross weight of the single + package.g
H code height:
height m
strain coefficient, see Table Y;
job number.
5.3-3.3 Test pass criteria: All sample boxes are not broken and no waves, this test is qualified, if one of the two standards is not met, this test is judged as a small pass.
5.3.4 Vertical impact drop test
5.3.4, 1 Handling conditions 5.3.3.1.
5.3.4.2 Test period GB4857.5 is carried out, and the drop rate and drop sequence are in accordance with GB4857.5. 5.3.4.3 Test pass criteria: There is no damage when pushing the box, and the contents are not slipping. This test is qualified. Among them, one box is not qualified, and this test is not qualified.
5.3.5 Type inspection is qualified, and the test is qualified, and this model is judged as a qualified. If one certificate fails, the type inspection will be classified as unqualified. 6 General Rules for Judgment
External inspection, performance inspection, type inspection department qualified, state inspection is qualified, as long as there is one unqualified inspection batch is unqualified.
Additional instructions
This standard is proposed by the State Import and Export Commodity Inspection Bureau of the People's Republic of China. This standard is also recommended by the People's Republic of China for the import and export of goods. The standard mainly covers the peak, payment, and other aspects.Use three-dimensional edge pressure, exposed wear, assembly, adhesion test, sweep block, micro-discard test block -2 decision: cut 4 pieces from each box, not less than (15×175) and the sample: pump resistance test group block 2 pairs, cut 4 pieces from each box, not less than + (140×14C) mm, no crease or obvious damage:
station test run except missing 12 pieces, cut 4 pieces from each box, tile slow The test specimen with the short side (25×c) mm and an error of ±1 mm:
The test specimen is found in the hall, and the printing trace is not damaged. Therefore, 3 decisions are made. The direction of the test specimen is the short side (25x100mm. When the error is ±3.5mm, the test is carried out according to GB6155. The average value of the measured value is expressed in N/T, and the table has three significant figures. 5.2.4.2 Test qualification criteria
Not exceeding the provisions of Table 6, the ratio of fresh food, vegetable food, cold food and easy-to-transport products (except container transportation) should be lower than the first provision in Table 6.
The third type
The fourth type ||t t||Contents
Therefore, the above is the maximum content
Except for the people
Resistant strength
Cfiam\;
7.55:≤10(3)
1.181r(12)
1.57×10(16)
1.96×10/(0)
(kg? . r.*:
.81(10e)
dynamic pressure exhaustion,
tkeirm!
×1(5:
5.83X10(6)
5.86xn(7)
chicken will be strong bottom
Nin: show
(kzf）
5.88X10-51
5-88×1G-51
5.88×1c31
second by
brother Liu Ping
the biggest scene
5.2.5 discussion breaking degree test
green combination counterattack
SN/T 0262-93
Preserved egg resistance
(kgf/cm)
1.18X10(12)
. 57X_0(16)
9;j0'(20)
2 55×:0(26)
Sensitive penetration strong spot
Ckgl +cnt')
8-83(90)
10.3:155X
12.3(125)
13. 7:1433
Reach five strong celebration
(sgf/cm)
5.83X1C'(5)
6 85x117)
3 84x:c(5)
Swimming speed
(kzf/em8）
5.88X10()
5. 38 10 (6)
5-5510(6)
5-2.5.1 The test method is as follows, and 4 pieces of each box are tested for the straight and straight rubber width. The measured value of the goods is almost the same, expressed as kP, with three significant figures. 5.2-5.2 Test qualification criteria The test is carried out in accordance with 2.4.2. 5.2.6 is a test method according to GB267S.7. Take 4 samples of each single cream or even 6 samples. This side is tested longitudinally and in reverse direction. The average value of the measured drug ratio is taken as the type strength value. The value is shown in the figure. The third digit is the effective mathematical value. 5.2. 5.2 Test qualification criteria shall comply with 5 2-4-2. 5.2.7 Adhesion strength test
5.2.7.: The following method is in accordance with G548, with each sample subjected to 2 peaks and the paper lock repair paper permanent separation test, and the average of the measured values is the adhesion strength value, expressed in N/m: three significant figures, 5.2.7.2 Test criteria are in accordance with 5.2.4.22. 5.2. 8 Compression test
5.2-8. 1 Trial method
loss GB487.4 World Bank, control code high business m. Pressure resistance value legislation formula (2) calculation PK.GiH
where P
pressure resistance N
K--deterioration coefficient test system); G-single piece packaging gross.kg
H-. Thin machine business.n
box business.n;
—take teaching position.
poor system effect K
32 days-196 days
: the system effect length is determined according to the storage conditions of the paper shrinkage of the objects packed: 5-2.8-2 trial joint venture quality
which welcomes E
when the sample is determined to be under the expansion pressure signal P, the top test is qualified. If the whole box does not meet the requirements, the item or test may fail. 5.2.9 Performance test batch qualification criteria
When all the specified test items have passed, the performance test is judged to be qualified. If one item fails, the performance test is judged to be slightly qualified. 5.3 or inspection
5. 3. 1 Inspection H
Stacking test, vertical impact test.
5.3.2 Requirements
SN/T 262—93
When the following situations occur, the type inspection of the carton transport packaging can be carried out; when the raw materials, equipment or process changes: n
bWhen the supplier and the supplier make requirements
C. When it is necessary.
5.3.3 Stacking test
5.3.3.1 According to GB4857.2, the test material has a 23-2 core material moisture rise of 59 years = 5% and is folded down for 24, and the test is carried out under this condition.
5.3.3.2 Test square teeth
According to GB4853.$. The code is calculated based on the formula <3): N,=x#
Where: - the total code applied on the paper, M, - the gross weight of the single + package.g
H code height:
height m
strain coefficient, see Table Y;
job number.
5.3-3.3 Test pass criteria: All sample boxes are not broken and no waves, this test is qualified, if one of the two standards is not met, this test is judged as a small pass.
5.3.4 Vertical impact drop test
5.3.4, 1 Handling conditions 5.3.3.1.
5.3.4.2 Test period GB4857.5 is carried out, and the drop rate and drop sequence are in accordance with GB4857.5. 5.3.4.3 Test pass criteria: There is no damage when pushing the box, and the contents are not slipping. This test is qualified. Among them, one box is not qualified, and this test is not qualified.
5.3.5 Type inspection is qualified, and the test is qualified, and this model is judged as a qualified. If one certificate fails, the type inspection will be classified as unqualified. 6 General Rules for Judgment
External inspection, performance inspection, type inspection department qualified, state inspection is qualified, as long as there is one unqualified inspection batch is unqualified.
Additional instructions
This standard is proposed by the State Import and Export Commodity Inspection Bureau of the People's Republic of China. This standard is also recommended by the People's Republic of China for the import and export of goods. The standard mainly covers the peak, payment, and other aspects.
5.83X10(6)
5.86xn(7)
Chicken will be strong bottom
Nin: Show
(kzf）
5.88X10-51
5-88×1G-51
5.88×1c31
Second by
brother Liu Ping
The biggest scene
5.2.5 Breaking test
Green combination
SN/T 0262-93
Egg resistance
(kgf/em)
1.18X10(12)
. 57X_0(16)
9;j0'(20)
2 55×:0(26)
Sensitive penetration strong spot
Ckgl +cnt')
8-83(90)
10.3:155X
12.3(125)
13. 7:1433
Dawuqiangqing
(sgf/cm)
5.83X1C'(5)
6 85x117)
3 84x:c(5)
Yumin containing fish
(kzf/em8）
5.88X10()
5. 38 10 (6)
5-5510(6)
5-2.5.1 The test method shall be carried out in accordance with GB 645. Each box shall be tested for 4 pieces in the same direction and in the opposite direction. The average value of the tested goods shall be the delay value, expressed as kP, and the three significant figures shall be taken. 5.2-5.2 Test qualification criteria shall be in accordance with the provisions of 2.4.2. 5.2.6, that is, the strength test
5.2.6.: The strength test method shall be carried out in accordance with GB 267S.7. Each single frost shall be tested for 4 pieces in the same direction and in the opposite direction. The average value of the tested goods shall be the strength value, expressed as kP, and the three significant figures shall be taken. 5.2. 5.2 Test qualification criteria shall be in accordance with the provisions of 5 2-4-2. 5.2.7 Adhesion strength test
5.2.7.: The following method is in accordance with G548, with each sample subjected to 2 peaks and the paper lock repair paper permanent separation test, and the average of the measured values is the adhesion strength value, expressed in N/m: three significant figures, 5.2.7.2 Test criteria are in accordance with 5.2.4.22. 5.2. 8 Compression test
5.2-8. 1 Trial method
loss GB487.4 World Bank, control code high business m. Pressure resistance value legislation formula (2) calculation PK.GiH
where P
pressure resistance N
K--deterioration coefficient test system); G-single piece packaging gross.kg
H-. Thin machine business.n
box business.n;
—take teaching position.
poor system effect K
32 days-196 days
: the system effect length is determined according to the storage conditions of the paper shrinkage of the objects packed: 5-2.8-2 trial joint venture quality
which welcomes E
when the sample is determined to be under the expansion pressure signal P, the top test is qualified. If the whole box does not meet the requirements, the item or test may fail. 5.2.9 Performance test batch qualification criteria
When all the specified test items have passed, the performance test is judged to be qualified. If one item fails, the performance test is judged to be slightly qualified. 5.3 or inspection
5. 3. 1 Inspection H
Stacking test, vertical impact test.
5.3.2 Requirements
SN/T 262—93
When the following situations occur, the type inspection of the carton transport packaging can be carried out; when the raw materials, equipment or process changes: n
bWhen the supplier and the supplier make requirements
C. When it is necessary.
5.3.3 Stacking test
5.3.3.1 According to GB4857.2, the test material has a 23-2 core material moisture rise of 59 years = 5% and is folded down for 24, and the test is carried out under this condition.
5.3.3.2 Test square teeth
According to GB4853.$. The code is calculated based on the formula <3): N,=x#
Where: - the total code applied on the paper, M, - the gross weight of the single + package.g
H code height:
height m
strain coefficient, see Table Y;
job number.
5.3-3.3 Test pass criteria: All sample boxes are not broken and no waves, this test is qualified, if one of the two standards is not met, this test is judged as a small pass.
5.3.4 Vertical impact drop test
5.3.4, 1 Handling conditions 5.3.3.1.
5.3.4.2 Test period GB4857.5 is carried out, and the drop rate and drop sequence are in accordance with GB4857.5. 5.3.4.3 Test pass criteria: There is no damage when pushing the box, and the contents are not slipping. This test is qualified. Among them, one box is not qualified, and this test is not qualified.
5.3.5 Type inspection is qualified, and the test is qualified, and this model is judged as a qualified. If one certificate fails, the type inspection will be classified as unqualified. 6 General Rules for Judgment
External inspection, performance inspection, type inspection department qualified, state inspection is qualified, as long as there is one unqualified inspection batch is unqualified.
Additional instructions
This standard is proposed by the State Import and Export Commodity Inspection Bureau of the People's Republic of China. This standard is also recommended by the People's Republic of China for the import and export of goods. The standard mainly covers the peak, payment, and other aspects.
5.83X10(6)
5.86xn(7)
Chicken will be strong bottom
Nin: Show
(kzf）
5.88X10-51
5-88×1G-51
5.88×1c31
Second by
brother Liu Ping
The biggest scene
5.2.5 Breaking test
Green combination
SN/T 0262-93
Egg resistance
(kgf/em)www.bzxz.net
1.18X10(12)
. 57X_0(16)
9;j0'(20)
2 55×:0(26)
Sensitive penetration strong spot
Ckgl +cnt')
8-83(90)
10.3:155X
12.3(125)
13. 7:1433
Dawuqiangqing
(sgf/cm)
5.83X1C'(5)
6 85x117)
3 84x:c(5)
Yumin containing fish
(kzf/em8）
5.88X10()
5. 38 10 (6)
5-5510(6)
5-2.5.1 The test method shall be carried out in accordance with GB 645. Each box shall be tested for 4 pieces in the same direction and in the opposite direction. The average value of the tested goods shall be the delay value, expressed as kP, and the three significant figures shall be taken. 5.2-5.2 Test qualification criteria shall be in accordance with the provisions of 2.4.2. 5.2.6, that is, the strength test
5.2.6.: The strength test method shall be carried out in accordance with GB 267S.7. Each single frost shall be tested for 4 pieces in the same direction and in the opposite direction. The average value of the tested goods shall be the strength value, expressed as kP, and the three significant figures shall be taken. 5.2. 5.2 Test qualification criteria shall be in accordance with the provisions of 5 2-4-2. 5.2.7 Adhesion strength test
5.2.7.: The following method is in accordance with G548, with each sample subjected to 2 peaks and the paper lock repair paper permanent separation test, and the average of the measured values is the adhesion strength value, expressed in N/m: three significant figures, 5.2.7.2 Test criteria are in accordance with 5.2.4.22. 5.2. 8 Compression test
5.2-8. 1 Trial method
loss GB487.4 World Bank, control code high business m. Pressure resistance value legislation formula (2) calculation PK.GiH
where P
pressure resistance N
K--deterioration coefficient test system); G-single piece packaging gross.kg
H-. Thin machine business.n
box business.n;
—take teaching position.
poor system effect K
32 days-196 days
: the system effect length is determined according to the storage conditions of the paper shrinkage of the objects packed: 5-2.8-2 trial joint venture quality
which welcomes E
when the sample is determined to be under the expansion pressure signal P, the top test is qualified. If the whole box does not meet the requirements, the item or test may fail. 5.2.9 Performance test batch qualification criteria
When all the specified test items have passed, the performance test is judged to be qualified. If one item fails, the performance test is judged to be slightly qualified. 5.3 or inspection
5. 3. 1 Inspection H
Stacking test, vertical impact test.
5.3.2 Requirements
SN/T 262—93
When the following situations occur, the type inspection of
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.