JB/T 9831-1999 This standard is a revision of ZB T60 004-88 "Rules for the compilation of tractor models". The main change is that the power code content has been modified according to the original Ministry of Machinery and Electronics Machinery (1991) No. 111 document "Regarding the approval of the first amendment to ZB T60 004-88". This standard specifies the composition and compilation method of agricultural and forestry tractor models. This standard applies to agricultural and forestry tractors. This standard was first published on the date of year. JB/T 9831-1999 Rules for the compilation of agricultural and forestry tractor models JB/T9831-1999 Standard download decompression password: www.bzxz.net

JCS65.060.10
Machinery Industry Standard of the People's Republic of China
JB/T9831-1999
Tractors for agriculture and forestry-Code of model designations
Published on August 6, 1999
State Administration of Industry and Information Technology
Implementation on January 1, 2000
JB/T9831—1999
This standard is a revision of ZBT60004—88 "Rules for the Compilation of Model Designations for Tractors". Compared with ZBT67004-88, this standard has the following differences in technical content: Based on the original document No. 111 of the Ministry of Machinery and Electronics (1991), the United States approved the amendment No. 2BT60004-88, and the power code content was modified. This standard replaces ZBT6004-88 water standard from the date of implementation. The water standard unit is Luoyang Tractor Research Institute. The main personnel of this standard are: Bo Keyin, Shang Xiangsheng. 1 Scope
Machinery Industry Standard of the People's Republic of China
Model reduction and compilation rules
Farm tractors
Tractors far agrleuhturt ind forestry Cade of mada This standard specifies the composition and compilation method of agricultural and forestry tractor models. This standard applies to agricultural and forestry tractor models. The composition of models is JE/T9831-1999. ZB16u00488. 2. The model of the tractor is composed of a series of codes, power code, type code, function code and distinguishing mark. The order of the code is as follows: zoning mark, function code, type code ... 2.2 Series codes are represented by two letters (the last letter is 1 or 0) to distinguish different series and models. If not necessary, the series code can be omitted. 2.3 Power code is represented by the engine rated power value (in kW) multiplied by an integer near the coefficient of 1.36. 2.4 Type code uses underscore integers, such as rear-wheel drive four-wheel type
1 single-axle typebZxz.net
2 single-axle type||t t||One wheel or juxtaposed front wheel
Four wheel dynamic
2.5 Function codes use the following letter symbols: (blank) General agricultural use
Orchard use
H Highland source cultivation use
Log collection
Industrial forestry use
3 Self-propelled chassis type
9 Ship type
P Slope use
s Paddy field use
T Transportation use
Y Horticulture use
2 Marshland use
2.6 Structure After major improvements, the structure can be marked with a distinguishing mark, which is represented by Arabic numerals. Approved by the State Machinery Industry Bureau on August 6, 1999 and implemented on January 1, 2000
3 Model frequency system
3.1 The letter symbol of the series code is selected by the T factory. 3.2 Select one of the type code and the current function code to fill in. JBT9831—1999
3.3 If other numbers must be used as type codes or other letters as function codes, they should be approved by the department responsible for industry standards. 3. 4 Examples
121: Foreign tractor:
150-[: 11kW foreign wheeled tractor, first improved model: 502J-2: 36kW crawler tractor, second improved model: B144G: B series (or B model) 10kW four-wheel drive tractor; 121T: 9kW foreign tractor-transformed transporter. 2
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.